Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

流动阻力及能量损失对注射成型制件的影响

本文分析了在塑料熔体充满型腔的过程中，流动阻力及能量损失产生的形式和物理原因，进而讨论了对塑料制件成型及凝固过程中的影响。并提出降低影响的措施。     

进气道喘振诱发因素及其可靠性分析

针对飞机进气道的典型故障-喘振的诱发因素进行全方位的分析论证，并为从事航空工程的人员提供一种对动力装置整体性能进行可靠性评估方案，篇末对世界上比较先进的进气道气动设计思想及其喘振机理进行分析，可以为飞机设计师在设计飞机过程中具体分析问题提供一定的参考。     

专科英语、本科英语及成人专科英语的定位和相互关系

专科英语在理论上被界定为专门用途英语(ESP)分支下,介于学术英语(EAP)与职业英语(EOP)之间的业务用途英语(EPP)。而本科(大学)英语在理论体系上属于普通英语(GE)。本文从ESP理论的角度探讨了专科英语,本科英语及成人专科英语的定位和相互关系。     

平面形状误差分离方法的比较分析

就十种典型的精密平面形状误差测量－分离方法的权函数及其零点，作了分析比较。按形状误差谐波抑制最小准则，论证了五点式正交逐次三点法、九点式正交逐次三点法、复合三点法、不对称二维混合法和不对称四点法优于其他方法，不对称四点法则较为理想。     

基于磁场映像的印制电路板故障诊断方法研究

简要分析了印制电路板的电磁场，提出了用电磁感应法测量磁场的电咱故障诊断新方法，并给出了测试系统组成方案。最后通过验证实验证明了该方法是确实可行的。     

液冷头盔致冷效能的医学研究

在45℃高温条件下,应用液冷头盔给10名被试者的头颈部致冷,散热效能较高,可带走安静时30.9％～48.3％的代谢产热。降低身体的热蓄积,减少出汗,减慢心率、直肠温度和皮肤温度的上升速率。对头颈部致冷可降低身体的热紧张度50％～70％,明显改善对温热的舒适感觉。同时表明,致冷液温、流量及液流走向,对致冷效能均有显著影响。为液冷头盔及致冷装置的设计,提供了医学实验依据。     

Further study of the Pencil-MUSIC algorithm

For finding 2-D angles and polarizations of waves arriving at a rectangular array of crossed dipoles, the Pencil-MUSIC method can achieve the near optimum performance with much less computational burden than the MUSIC (multiple signal classification). Following an angle-only ESPRIT (estimation of signal parameters via rotational invariance techniques) method, an angle-only Pencil-MUSIC can be easily formulated which is far more accurate than the former especially in the coherent case. The angle-only Pencil-MUSIC is analyzed and compared with the original Pencil-MUSIC. The new version sacrifices the polarization estimation to achieve about 8 times more efficient computation The accuracy of the new version seems no more than 4 times worse in terms of estimation deviation     

钣金制件表面的相贯线求作方法

本文提出钣金制件表面相贯线求作的新方法。