电铸镍Wolter I型光学系统制造技术发展综述

摘要： 为满足未来脉冲星导航和空间天文观测任务对X射线望远镜的载荷需求，Wolter I光学系统的研制正逐渐成为新的研究热点，电铸镍方案是当前国内外X射线光学系统镜筒制造的主要技术方案.文章对电铸镍X射线光学系统制造工艺、国内外研制现状、未来应用需求进行了介绍和整理，梳理了电铸镍X射线光学系统研制遇到的关键技术和难点，提出了后续研究发展建议，以促进中国在 X射线脉冲星自主导航、空间探测领域的快速发展.     

舰载机着舰时航迹稳定性研究

本文讨论了舰载飞机以小于有利速度着舰时的航迹稳定性问题。在分析飞机航迹稳定性的同时,还对油门杆控制、机动襟翼控制对改善航迹稳定性的作用进行了初步探讨;在此基础上还讨论了舰载飞机加装波束导引系统对着舰过程的影响原理。结果表明:采用油门杆控制、机动襟翼控制来改善着舰阶段的航迹稳定性是可行的:而且用以上两控制系统作为内环的自动驾驶仪在波束导引系统自动导引飞机着舰过程中,能控制飞机的飞行速度、高度,帮助驾驶员操纵。     

rom 15 sel

with primary goat embryonic fibroblast showed no difference from traditional feederlayer-based culture method used in mouse and human. The putative primary EG colonies were multilayer clumps ofcompact cel     

On adaptive multiband signal detection with the SMI algorithm

In a nonstationary and/or nonhomogeneous interference environment, an adaptive system for target detection may suffer a severe performance degradation due to the lack of a sufficient amount of data from which the system can learn (estimate) the statistics of the environment. The detection performance of an adaptive system, which employs a frequency diversity (multiband) signaling waveform and a multiband sample matrix inversion algorithm (SMI), is analyzed. By comparison with the corresponding single-band system under the chosen system constraint, it is shown that the multiband system can significantly outperform the single band when the amount of data available from a single frequency band is severely limited by the environment     

称重传感器的一种新的滞后补偿方法(英文)

通过对电阻应变式称重传感器在各种加载卸载情况下的滞后特性的分析 ,建立了其相应的数学模型 ,并初步探讨了一种可以通过程序在仪表中对传感器的重要指标—滞后进行补偿从而提高整个传感器的精度的方法。最后 ,对以上方法进行了验证性试验 ,证明了补偿方法的可行性。     

计算机帧时间对半实物仿真的影响

半实物仿真试验中,要求计算机帧时间与计算积分步长相一致,但在实际试验中不容易精确地做到。本文分析了这种不一致给半实物仿真试验带来的影响,给出了解决的办法,文章中还给出了一实例来说明。     

Field formation around negatively biased solar arrays in the LEO-plasma

Heavy emission caused by impacting plasma ions results in a fast discharging effect of the initially large surface potentials on the dielectric solar cells. This eventually counteracts the energization process of the plasma ions to the cover glasses and leaves no significant electric fields. Thus, with an existing thermal plasma, electrons are again able to reach dielectric surfaces. Strong localized electric fields of the order of several 10 kV/cm form near the interconnector-cover glass interface.     

EUV emission from normal galaxies

Using data from the Wide Field Camera EUV all-sky survey, we have established upper limits to the EUV flux from a sample of 30 bright, nearby, non-active spiral galaxies. These galaxies were chosen to be those most likely to be detected in the EUV on the basis of (i) low interstellar absorption within our own galaxy, (ii) brightness in other wavebands, (iii) high star formation activity, and (iv) proximity. The derived EUV upper limits are restrictive, and establish for the first time that the EUV flux escaping from galaxies does not constitute a major component of their bolometric luminosity, and in particular that it cannot be the sink for the energy injected into the interstellar medium by supernova explosions, as had been suggested following the failure to detect this power in the X-ray band.     

A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

塑性动态断裂过程中梁的塑性铰转动因子的确定方法

运用理论分析方法和实测试验方法，探讨了梁在塑性动态断裂过程中，其塑性铰转动因子的变化规律，提出了断裂过程中塑性铰几何转动因子的概念及其确定方法，并以３点弯曲梁理论分析解为例，计算了梁在塑性动态断裂过程中，其塑性铰转动因子的变化规律。该计算结果与３点弯曲梁动态断理解实验实测相一致。理论分析进一步明确了梁的塑性铰转动因子具有几何与物理两种不同的本质含意，并可直接用于修正梁的塑性动态断裂的理论分析解。