Test results of the air turbo ramjet for a future space plane

The Institute of Space and Astronautical Science (ISAS) has been engaged in the development study on the Air Turbo Ramjet (ATR) engine since 1986 in cooperation with the Ishikawajima Harima Heavy Industries Co. Ltd (IHI). The ATR is one of the most preferable candidates for the propulsion system of a future space plane. Our ATR engine is a combined cycle air breathing propulsion system which consists of the turbojet and the fan boosted ramjet using the liquid hydrogen as a fuel. This engine system was named “ATREX” after employing the expander cycle. The ATREX is energized by thermal energy extracted regeneratively in both the pre-cooler installed in the air intake and the heat exchanger in combustion chamber. The ATREX works in the flight condition from sea level static up to Mach 6 at 35 km altitude. The ATREX employs the tip turbine configuration for compactness of turbo machinery. We are assessing the feasibility of the ATREX system by the sea level static tests using the 1/4-scale model (ATREX-500) with a fan inlet diameter of 300 mm and overall length of 2120 mm. In 1990, the ATREX-500 engine was tested in a sea level static condition to verify the performance characteristics of the turbo machinery and the combustor. In September of 1991, the heat exchanger was installed in the combustion chamber and tested independently from the turbo system. In November of 1991, the heat exchanger was coupled with the turbo system and tested to verify the overall system of the ATREX. In this paper are presented the test results of the ATREX-500 engine tested in the sea level static condition.     

Development Study on ATREX Engine

This is the status report of the development study on ATREX engine (Air Turbo Ramjet) that is now under way in the Institute of Space and Astronautical Science (ISAS) cooperation with the Ishikawajima Harima Heavy Industries (IHI), the Kawasaki Heavy Industries (KHI), the Mitsubishi Heavy Industries (MHI). ATREX engine will be applied for the propulsion system of fly-back booster of TSTO space plane. ATREX is the combined cycle (a fan-boosted ramjet) engine providing the effective thrust from sea level static to flight Mach number 6. ATREX is worked on the expander cycle with precooling the incoming air as shown in Fig. 1. ATREX employs the tip turbine configuration which allows the compactness and the light weight of turbo machinery and the variable geometry airintake and plugnozzle which allow the wide range operation conditions.From 1990 to 1992, “ ATREX-500“ has been tested at the sea level static conditions. ATREX-500 is the 1/4-scale model of which fan inlet diameter is 300 mm and overall length 2,200 mm. From 1992 have been performed the wind tunnel tests on the primary components of ATREX, the axisymmetric variable geometry airintakes, the precoolers and the variable geometry plug nozzles. In parallel to the windtunnel tests, the ram combusters have been tested simulating the hypersonic flight conditions and the application studies on advanced carbon-carbon composite for the tip-turbine and fan assembly has been proceeded.In 1994 initiated the flight test plan in which ATREX will be verified in the practical flight conditions by using an unmanned flying test bench.In 1995 will be tested ATREX-500 installing the precooler under the sea level static conditions to examine the engine performance and the icing on the precooler.The present paper addresses the high loading ram combuster experiment using the mixer with skewed lobes to generate swirl flow and the analytical studies and the designs on the precooler and the precooled ATREX engine and the flight test plan.