Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.     

Mechanism for assembling antenna in space

The development of large and precise space antennas is one of the most important topics in constructing space infrastructures. We evaluated an approach to assembling large and accurate space antennas which uses space robots. The assembly mechanism was launched together with the ETS-VII, the first telerobotic satellite from Japan, and its performance, including fully automatic assembling, was verified. The assembling-type antenna and the results of antenna assembly experiments are discussed     

Mercury Ion Analyzer (MIA) onboard Mercury Magnetospheric Orbiter: MMO

The Mercury Magnetopsheric Orbiter (MMO) is one of the spacecraft of the BepiColombo mission; the mission is scheduled for launch in 2014 and plans to revisit Mercury with modern instrumentation. MMO is to elucidate the detailed plasma structure and dynamics around Mercury, one of the least-explored planets in our solar system. The Mercury Plasma Particle Experiment (MPPE) on board MMO is a comprehensive instrument package for plasma, high-energy particle, and energetic neutral particle atom measurements. The Mercury Ion Analyzer (MIA) is one of the plasma instruments of MPPE, and measures the three dimensional velocity distribution of low-energy ions (from 5 eV to 30 keV) by using a top-hat electrostatic analyzer for half a spin period (2 s). By combining both the mechanical and electrical sensitivity controls, MIA has a wide dynamic range of count rates for the proton flux expected around Mercury, which ranges from 10⁶ to 10¹² cm⁻² s⁻¹ str⁻¹ keV⁻¹, in the solar wind between 0.3 and 0.47 AU from the sun, and in both the hot and cold plasma sheet of Mercury’s magnetosphere. The geometrical factor of MIA is variable, ranging from 1.0 × 10⁻⁷ cm² str keV/keV for large fluxes of solar wind ions to 4.7 × 10⁻⁴ cm² str keV/keV for small fluxes of magnetospheric ions. The entrance grid used for the mechanical sensitivity control of incident ions also work to significantly reduce the contamination of solar UV radiation, whose intensity is about 10 times larger than that around Earth’s orbit.     

The Galaxy Cluster Mass Scale and Its Impact on Cosmological Constraints from the Cluster Population

Space Science Reviews - The QB50 mission is a satellite constellation designed to carry out measurements at between 200–380 km altitude in the ionosphere. The multi-needle Langmuir probe...     

Communications transponder performance for Japanese Communications Satellite-2 and prospects for future systems

Communications transponder for the Japanese Communications Satellite-2 (CS-2a and 2b) to be launched into a geostationary orbit by N-II launch vehicle in February and August, 1983, has been developed. The transponder is provided with six-channel K-band ($\text{30}\text{20}\text{GHz}$) transponder including beacon transmitter, which operates in the highest frequency ranges ever utilized on an operational communications satellite, and two-channel C-band ($\text{6}\text{4}\text{GHz}$) transponder. Receiver front end of the K-band transponder consists of a direct mixer followed by a 1.8 GHz IF amplifier and provides 8 dB noise figure. 20 GHz output power is 4 W by final amplification at 5-W TWTA. C-band transponder provides 4 dB noise figure and 4.3-W output power. Key factors for future high capacity transponder are also presented.     

Physiologic and metabolic responses of wheat seedlings to elevated and super-elevated carbon dioxide

The metabolic consequence of suboptimal (400 μmol mol⁻¹ or ppm), near-optimal (1500 ppm) and supra-optimal (10,000 ppm) atmospheric carbon dioxide concentrations [CO₂] was investigated in an attempt to reveal plausible underlying mechanisms for the differential physiological and developmental responses to increasing [CO₂]. Both non-targeted and targeted metabolite profiling by GC–MS and LC–MS were employed to examine primary and secondary metabolites in wheat (Triticum aestivum, cv Yocoro rojo) continuously exposed to these [CO₂] levels for 14, 21 and 28 days. Metabolite profile was altered by both [CO₂] and physiological age. In general, plants grown under high [CO₂] exhibited a metabolite profile characteristic of older plants under ambient CO₂. Elevated [CO₂] resulted in higher levels of phosphorylated sugar intermediates, though no clear trend in the content of reducing sugars was observed. Transient starch content was enhanced by increasing [CO₂] to a much greater extent at 10,000 ppm CO₂ than at 1500 ppm CO₂. The percentage increase of starch content resulting from CO₂ enrichment declined as plants develope. In contrast, elevated [CO₂] promoted the accumulation of secondary metabolites (flavonoids) progressively to a greater extent as plants became mature. Elevated [CO₂] to 1500 ppm induced a higher initial growth rate, while super-elevated [CO₂] appeared to negate such initial growth promotion. However, after 4 weeks, there was no difference in vegetative growth between 1500 and 10,000 ppm CO₂-grown plants, both elevated CO₂ levels resulted in an overall 25% increase in biomass over the control plants. More interestingly, elevated atmospheric [CO₂] reduced evapotranspiration rate (ET), but further increase to the supra-optimal level resulted in increased ET (a reversed trend), i.e. ET at 1500 ppm < ET at 10,000 ppm < ET at 400 ppm. The differential effect of elevated and super-elevated CO₂ on plants was further reflected in the nitrogen dynamics. These results provide the potential metabolic basis for the differential productivity and stomatal function of plants grown under elevated and super-elevated CO₂ levels.     

Single-event performance of COTS-based MPU under flare and nonflare conditions

We investigated the in-orbit performance of a high-performance on-board computer developed with commercial off-the-shelf (COTS) technology in terms of its performance during the occurrence of single event effects. The processor worked and performed successfully both under normal and under solar flare conditions in 800 km altitude polar orbit. During a solar flare, the occurrence of single events increased by a factor of more than four compared with normal conditions. The area where single events occurred during the solar flare spread to the polar region, whereas normally they are limited to the region of South-Atlantic anomalies (SAA). Our results suggest that the performance of our COTS processor is sufficient for future space applications.     

Development status of the high-speed reentry system-DASH

Despite huge amount of data collected by the previous interplanetary spacecraft and probes, the origin and evolution of the solar system still remains unveiled due to limited information they brought back. Thus, the Institute of Space and Astronautical Science (ISAS) of Japan has been given a commitment to pave the way to an asteroid sample return mission: the MUSES-C project. A key to success is considered the reentry with hyperbolic velocity, which has not ever been demonstrated as yet. With this as background, a demonstrator of atmospheric reentry system, DASH, has been designed to demonstrate the high-speed reentry technology as a GTO piggyback mission. The capsule, identical to that of the sample return mission, can experience the targeted level of thermal environment even from the GTO by tracing a specially designed reentry trajectory. After the purpose of the mission was outlined at the last IAF symposium, the final fitting tests have been conducted in the ISAS Sagamihara Campus involving the flight model hardware. Furthermore, a series of rehearsals for recovery have been already executed. The paper describes the current mission status of the project.