Low-velocity detonations in cast and pressed high explosives

A model of low velocity detonations in charges of cast and pressed high explosives confined in metal tubes with thin walls is suggested. An analytical solution is obtained and velocities and pressures of stationary LVD waves are calculated as functions of the parameters of the wall confinement. The fraction of the total chemical energy transferred to maintain the shock wave and the average rate of reaction in the wave are estimated and the dynamics of transient predetonation processes are analysed. An explanation of the causes of the secondary shock wave formation in the transition from deflagration to normal detonations is suggested and the delay of this secondary wave is calculated and compared with experimental data.     

Main results and experience obtained on Mir space station and experiment program for Russian segment of ISS

This article presents main scientific and practical results obtained in course of scientific and applied research and experiments on Mir space station. Based on Mir experience, processes of research program formation for the Russian Segment of the ISS are briefly described. The major trends of activities planned in the frames of these programs as well as preliminary results of increment research programs implementation in the ISS' first missions are also presented.     

A technique of computer-aided synthesizing a finite element model of wing center section and outer wing torsion box joint for a transport aircraft

A technique of synthesizing the finite element model of the flange joint of the outer wing torsion box with the wing center section for a transport aircraft is presented. The technique is based on the functional decomposition principle, in which the general model of wing torsion box is synthesized from the separate substructure models including the flange joint. It has been shown that the manual input is significantly reduced, when the computer-aided synthesis is applied. This made it possible to cut time of synthesis and decrease the probability of error occurrence.     

Energy measurements of electrons and protons in cosmic ray physics using satellite and balloon calorimeters in recent two decades

Calorimeters are used in cosmic ray studies for a variety of purposes, such as measurements of particle energy, separation of electrons and hadrons, formation of triggers (signals for activation of instruments), and so on. In this review we consider the methods of energy reconstruct of protons and electrons (for particles with energies exceeding 10 GeV) in calorimeters of various types that are used in astrophysical experiments of cosmic ray studies carried out with balloons and satellites.     

Shock waves in water foams

Propagation of shock waves in tubes filled with water foams is studied using pressure gauges. Low amplitude shock waves consist of a precursor which propagates at a velocity slightly less than the acoustic velocity in the gas, and of a main compression wave which propagates slower than the precursor. Stronger shock waves have a single front. Maximum pressure rise in the incident and reflected shock waves cannot be calculated using one-dimensional conservation equations at the shock front. It is suggested that the flow of the liquid in foam cells has to be taken into account in order to predict the behavior of shock waves in foams. The nature of the gas which fills the cells is shown to have a strong effect on the quenching of blast waves in foams.     

Manifestations of sudden commencement of a severe magnetic storm of November 20, 2003, in generation of an SC pulse, <Emphasis Type="Italic">P</Emphasis><Subscript>SC</Subscript> pulsations,and spatial modulation of the auroral brightness

The results of investigation of the geomagnetic and auroral response to the commencement of a severe magnetic storm of November 20, 2003, are presented. It is established that the onset of SC led to the brightening of the auroral arc in the dusk sector for 2–3 min with its extent to the east with a velocity of 10–20 km/s and to displacement poleward with a velocity of 1.0 km/s. Furtheron, the fast auroral expansions of short duration (5 min) to the pole up to 2–4°were observed, repeating every 5–10 min during 40 min, which led to the spatial modulation of the brightness of the glow and to generation of P_SC pulsations with similar periods of oscillations. The broadening of aurora poleward had a steplike character, with generation of new arcs poleward of previous ones 5 arcs per 1.5 min. The modulation of brightness of the glow and P_SC were observed against the background of intensification of a two-cell DP2 type current system and were accompanied by multiple turnings of the IMF B_z from south to north and back. It is assumed that the source of P_SC pulsations was a modulation of the intensity of the DP2 ionosphere currents as a result of variations of the magnetosphere convection level.Translated from Kosmicheskie Issledovaniya, Vol. 42, No. 6, 2004, pp. 608–615.Original Russian Text Copyright © 2004 by Baishev, Borisov, Velichko, Solovyev, Yumoto.     

Analysis of object positioning accuracy provided by range-finding systems of various types

The accuracy of determining the aircraft coordinates by range-finding systems of various types was analyzed. Consideration was given to cooperative processing of range-finding, aggregate and difference range measurements made by multilateral surveillance systems..     

Testing and evaluation of a method for locating potentially hazardous sites of eventual microdestruction and detecting marks of ISS RS hull leakage

In 2008, two experiments – BAR and EXPERT – were performed on the Russian segment (ISS RS) during ISS missions 16 and 17 using diagnostic equipment BAR. The experiments were aimed to enhance ISS safety by proposing means and methods of detecting leaks due to many factors including microdestruction of pressurized modules of the vehicle. The BAR experiment was designed to assess the ultraviolet background in 56 potentially dangerous locations identified by RS ISS designers and engineers. The method for locating sites carrying the risk of microdestruction of pressurized structure was verified. The study showed that the rate of microdestruction is highly affected by level of ultrasound vibrations caused by onboard equipment. The ultrasound measurements in 200 RS ISS sites were performed within the BAR experiment. The method consists of looking for surfaces with atmospheric condensate in the areas of increased levels of ultrasound vibrations. Twenty six sites were added to the nomenclature of potentially risky sites to be monitored on the regular basis. Some of these sites were contaminated by fungi and bacteria.