Reconstructed 3-d magnetic field structure and hard X-ray two ribbons for 2000 Bastille-day event

The Bastille-day event in 2000 produced energetic 3B/X5.6 flare with a halo CME, which had great geo-effects consequently. This event has been studied extensively and it is considered that it follows the two-ribbon flare model. The flare/CME event was triggered by an erupting filament and TRACE observations showed formation of giant arcade structures during the flare process. Hard X-ray (HXR) two ribbons revealed for the first time in this flare event (Masuda et al., 2001). The reconstruction of 3-D coronal magnetic fields revealed a magnetic flux rope structure, for the first time, from extrapolation of observed photospheric vector magnetogram data and the flux rope structure was co-spatial with portion of the filament and a UV bright lane (Yan et al., 2001a, 2001b). Here we review some recent work related to the flux rope structure and the HXR two ribbons by comparing their locations and the flux temporal profiles during the flare process so as to understand the energy release and particle accelerations. It is proposed that the rope instability may have triggered the flare event, and reconnection may occur during this process. The drifting pulsation structure in the decimetric frequency range is considered to manifest the rope ejection, or the initial phase of the coronal mass ejection. The HXR two ribbons were distributed along the flux rope and the rope foot points coincide with HXR sources. The energy dissipation from IPS observations occurred within about 100 R _⋅ is consistent with the estimate for the flux rope system. This revised version was published online in August 2006 with corrections to the Cover Date.     

一种双管双变压器结构的正-反激组合变换器的分析

提出了一种双管双变压器结构的正反激组合变换器。该变换器电路结构简单,控制方便。该双变压器结构减少了单个变压器的原边匝数,从而降低了原边的铜耗,同时也使得低造型设计成为可能。文中着重对两变压器匝比相等和不等两种情况进行了分析比较。在匝比不等情况下,正反激变压器功率分配可灵活设计。最后试验结果验证了理论分析。     

机动再入飞行器自适应飞行控制系统设计

研究机动再入飞行器的制导控制问题。为了解决机动再入飞行器气动系数变化范围大、气动耦合严重和气动参数非线性过零常值大等恶劣条件下的控制，并且能充分利用飞行器可测量信息提高系统自适应能力，本文提出了状态方程参数辨识－－极点配置－－前馈补偿自适应控制的飞行控制系统的设计方法。通过对新型号再入飞行器的制导系统仿真，可以看出该控制系统使其有很好的飞行性能。     

基于并行禁忌遗传算法(PTGA)的预警卫星传感器调度研究

对预警卫星的传感器调度进行了研究，提出了传感器管理调度的系统组成。通过对传感器调度的分析，建立起相应的数学模型，定义了评价指标。结合并行遗传算法和禁忌搜索的特点，提出了一种新的解决预警卫星传感器调度问题的并行禁忌遗传算法(PTGA)。该算法采用多种群和禁忌搜索思想改进遗传算法的性能，从而提高整个算法的收敛速度和精度。实验结果表明该算法有效地解决了多目标情况下的传感器实时调度问题，并优于一般启发式算法。     

卫星成本预测的蒙特卡洛优化模型研究

传统的卫星成本预测模型预测结果单一，未考虑相应的不确定性因素。对此，提出了基于蒙特卡洛方法的卫星成本预测模型。该模型综合考虑了卫星成本技术的不确定性并给出了预测值的区间范围和概率分布。为了降低应用该模型所产生的误差，提出了最优分层抽样的方法，并通过划分分层区间提高了抽样的效率。最后，将收集到的相关数据代人该模型，其结果精度大约提高了10％左右。可见，使用优化的蒙特卡洛方法进行卫星成本预测具有较好的精确度。     

不同风速下海洋粗糙面散射系数的计算

在考虑风速的条件下,计算了海洋粗糙面的散射特性。用矩量法(MOM)计算了一维介质海洋粗糙面在Durden-Vesecky功率谱下的散射系数,由此获得了一定风速时的双站散射系数。仿真结果表明,计算值与文献数据非常吻合。由计算的不同风速下双站散射系数可知,风速对海洋粗糙面散射特性的影响较大。在一定的海拔高度上,散射角相同(除后向散射方向外)时,风速越大,散射就越强。     

碳纤维复合材料高压球形容器研制

采用变带距方法对球形容器进行优化设计，并研制了一批产品。试验结果表明，在纤维设计应力相同条件下，采用变带距缠绕的球形容器，其复合材料重量比等带距缠绕的轻２４．５６％，而其容器特性系数高出１０．４％，能同时满足设计提出的强度和重量两方面要求。     

轴对称降落伞稳定下降阶段的流场特性

文章根据降落伞的特点,通过3点假设(伞衣的薄膜假设、降落伞的轴对称假设和流场的定常 假设),将三维复杂流动问题,转化成二维轴对称问题,以节约计算时间。然后,建立轴对称降落伞的流体力 学计算模型,利用数值模拟手段,求解RNG(Renormalization Group)k-epsilon湍流模型下的N—S方程组,获 得与有关单位试验相吻合的计算结果。分析发现带顶孔的轴对称降落伞绕流和亚临界状态下带中心孔的 圆球绕流,在尾流区拓扑结构上几乎完全一致。结果表明建立的轴对称降落伞模型,能够揭示降落伞流场 的本质特性,为进一步研究降落伞流场的流动机理和流固耦合问题打下基础。     

Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

篦齿封严装置减振方法研究及减振装置设计

本文研究了用于篦齿封严装置的干摩擦式阻尼减振器的减振原理,采用篦齿封严装置气弹稳定性分析方法,分别研究了用于篦齿封严装置的阻尼环和阻尼套筒的减振效果,并在此基础上提出了阻尼减振器的工程设计方法。研究表明,干摩擦式阻尼减振器可以有效地提高篦齿封严装置的气动弹性稳定性。