Multimodal characteristics of a piezoelectric lead zirconate titanate element impacted with iron particles having velocities above 20 km/s

The responses of a piezoelectric lead zirconate titanate (PZT) element to hypervelocity collisions were experimentally studied. In this study, the particles of masses ranging from 0.3 to 10 fg were made to collide with PZT at velocities between 20 and 96 km/s. The amplitude and the corresponding rise time of the single-pulse output signals that were produced in the piezoelectric PZT element were measured to determine the possible collision states. The results revealed an apparently multimodal output; three classes were assumed to be involved in the pulse formation mechanism. The amplitude and rise time were sensitive to the collision velocity. The multimodal behavior implied that the PZT-based cosmic dust detectors should be calibrated according to the class they belong to.     

Measurements of bidirectional reflectance of ordinary chondrite for muses-C in-situ detection

MUSES-C, a Japanese sample return mission, is targeting a small near Earth asteroid, 1998SF36, which is considered an S-type asteroid and is similar in spectroscopy to LL class ordinary chondrite meteorite ([Binzel et al., 2001]). Although this mission will bring us detailed photometric data, that is, disk-resolved bidirectional reflectance data of the asteroid, there were few bidirectional reflectance data of ordinary chondrite meteorites. For the purpose of comparison with the data obtained by the in-situ observation, we have performed measurements of bidirectional reflectance of ordinary chondrite samples.

Here we summarize the result of our laboratory measurements of the bidirectional reflectance and compare them with the scattering property of 1998SF36. Although the geometric albedo of 1998SF36 is higher than the typical value of S-type asteroids, however, the laboratory data of ordinary chondrite are similar to or brighter than the model disk-resolved reflectance of 1998SF36 derived from disk-integrated ground-based data. We found in our laboratory data that there is a positive correlation between the surface roughness and the strength of the opposition effect. A stronger opposition effect in the reflectance of 1998SF36 than the laboratory data may therefore indicate that the surface of the asteroid has rougher structure than our laboratory samples.     

The gravity-darkening of the main-sequence components of spectral types A, F and G in detached close binary systems

From analysis of the photometric ellipticity effect in seven well-understood detached close binary systems, empirical values of the exponent of gravity-darkening have been practically deduced for eleven main-sequence components of spectral types A, F and G which should cover the range of structural change (from radiative to convective) in stellar atmospheres. The result indicate that values of the exponent diminish gradually with decreasing effective temperatures from 1.0 for radiative atmospheres with T > 8500 K to = 0.2 0.3 for convective atmospheres with T < 6500 K, in spite of some uncertainty in the reflection correction process.     

Effects of microgravity on c-fos gene expression in osteoblast-like MC3T3-E1 cells.

The paper summarizes the data on proliferation and gravity-related gene expression of osteoblasts that were obtained from an experiment conducted under simulated and real microgravity conditions. Simulated microgravity conditions obtained in a clinostat depress proliferation of both osteoblast-like MC3T3-E1 and HeLa carcinoma cells. This depression of proliferation occurs in a collagen gel culture in which the flow of culture medium by rotation may be reduced. Interestingly, MC3T3-E1 cells which are probably one of target cells to microgravity are more sensitive than the HeLa cells. Simulated microgravity inhibited the epidermal growth factor (EGF)-induced c-fos gene expression in the MC3T3-El cells. To examine in detail the effect of real microgravity on the EGF signal transduction cascade in osteoblasts, MC3T3-E1 cells were cultured in the Cell Culture Experiment Module of the sounding rocket TR-1A6. The EGF-induced c-fos expression in cells was depressed under short-term microgravity conditions in the sounding rocket, while the phosphorylation of mitogen-activated protein kinase (MAPK) was not affected compared with the controls grown on the ground. These results suggest that an action site of microgravity in the signal transduction pathway may be downstream of MAPK.     

Self-perspiration garment for extravehicular activity improves skin cooling effects without raising humidity

Introduction

The current U.S. extravehicular activity (EVA) suit in space includes liquid cooling and ventilation garment (LCVG) to control thermal condition. Tubes knitted in LCVG for flowing water interrupt evaporation of perspiration, and astronauts feel discomfort. In the present study, we hypothesized that a self-perspiration garment would effectively lower the skin temperature without raising humidity in the garment. Thus, we developed and examined the effects of the garment.

Methods

Eight healthy subjects were studied with a cyclic ergometer of 30, 60 90 and 120 W loading for 3 min each. Skin temperature and humidity on the back were measured continuously. Subjects wore and tested three types of garments i.e., a spandex wear without any cooling device (Normal), a simulated LCVG (s-LCVG) or the spandex wear knitted a vinyl tube for flowing water, and the spandex wear with a tube, which flows water and self-perspiration with oozing water for evaporative cooling (SPEC).

Results

All measurements were reached to steady state 2–3 min after the setting. The s-LCVG decreased skin temperature 0.39±0.14 °C during 12 min of cooling. With SPEC, skin temperature did not decrease significantly until 6–9 min after starting the cooling. However, the temperature decreased rapidly and significantly after that, and finally decreased 1.59±0.32 °C. Humidity in the SPEC was significantly lower than that in s-LCVG.

Discussion

SPEC was effective for lowering skin temperature without raising humidity in the garment. The concept is expected to use as a better cooling system during EVA.     

Deriving the Absolute Reflectance of Lunar Surface Using SELENE (Kaguya) Multiband Imager Data

The absolute reflectance of the Moon has long been debated because it has been suggested (Hillier et al. in Icarus 151:205–225, 1999) that there is a large discrepancy between the absolute reflectance of the Moon derived from Earth-based telescopic data and that derived from remote-sensing data which are calibrated using laboratory-measured reflectance spectra of Apollo 16 bulk soil 62231. Here we derive the absolute reflectance of the lunar surface using spectral data newly acquired by SELENE (Kaguya) Multiband Imager and Spectral Profiler. The results indicate that the reflectance of the Apollo 16 standard site, which has been widely used as an optical standard in previous Earth-based telescopic and remote-sensing observations derived by Multiband Imager, is 47% at 415 nm and 67% to 76% at 750 to 1550 nm of the value for the Apollo 16 mature soil measured in an Earth-based laboratory. The data also suggest that roughly 60% of the difference is caused by the difference in soil composition and/or maturity between the 62231 sampling site and the Apollo 16 standard site and that the remaining 40% difference can be explained by the difference between the compaction states of the laboratory and the actual lunar surface. Consideration of the compaction states of the surface soil demonstrates its importance for understanding the spectral characteristics of the lunar surface. We also explain and evaluate data analysis procedures to derive reflectance from Multiband Imager data.     

Radio-scintillation observations of interplanetary disturbances

Recent developments in the studies of interplanetary disturbances by scintillation (IPS) techniques are briefly reviewed. The turbulent post-shock region of an interplanetary disturbance produces transient enhancements in the scintillation level and the flow speed in many cases. An empirical method to determine three-dimensional angular distribution of propagation speed of the disturbance on the basis of IPS measurements of post-shock flow speeds is applied to 17 events which took place in 1978–1981. Among them, four representative examples including two events which were associated with disappearing solar filaments are described in detail. Several disturbances had oblate configurations; the latitudinal extent is smaller than the longitudinal extent. On an average, the angular distribution of propagation speed at 1 AU heliocentric distance is quasi-isotropic over a longitudinal range of 100° centered at the normal of relevant solar phenomenon. The net excess mass and energy in an interplanetary disturbance associated with a disappearing solar filament can be comparable to those of an interplanetary disturbance associated with a large solar flare.     

A space station experiment on large antenna assembly and measurement

The large assembly antenna in space can meet future requirements of both high frequency and large aperture. This paper proposes an experiment on assembling a large antenna at the Space Station, and discusses a realizable procedure of the experiment. The objective of this experiment is that a large antenna of a 10-m diameter is assembled in space and at the same time problems occurring in the assembling process are clarified by conducting the following experiments: assembly of test articles by manipulators, measurement of both mechanical and electrical performance of the assembled antenna, test of the pointing control system, and operational test. In the operational test, the weather radar development test and the large aperture microwave radiometer development test are conducted. Furthermore, the problem areas and items of further study are discussed in this paper.     

Influence of curved thin-film device on deformation of a solar sail

A spinning solar sail IKAROS’s membrane is estimated to unexpectedly deform into an inverted pyramid shape due to thin-film devices with curvature, such as thin-film solar cells and steering devices on the membrane. It is important to investigate the deformation caused by the curved thin-film devices and predict the sail shape because the out-of-plane deformation greatly affects solar radiation pressure (SRP) and SRP torque. The purpose of this paper is to clarify the relationship between the global shape and orientation and position of curved thin-film devices and to evaluate SRP torque on the global shape using finite element analysis. The global shape is evaluated based on the out-of-plane displacement and the SRP torque. When the curved thin-film devices make the membrane shrink in the circumferential, diagonal, and radial direction, the sail deforms into a pyramid shape, an inverted pyramid one, and a saddle one, respectively. The saddle shape is more desirable for solar sails than the inverted pyramid shape and the pyramid one from the viewpoint of shape stability to SRP and control of SRP torque in the normal direction of the sail (windmill torque). The position of the thin-film device tends to increase the absolute value of windmill torque when it is biased circumferentially from the petal central axis. The suggested design principles for the arrangement of thin-film devices is that the curved thin-film devices should be directed so that the sail shrinks in the radial direction in order to deform the sail into a saddle shape with high shape stability, and the position of the thin-film devices should be biased in the circumferential direction paying attention to the absolute value of windmill torque to determine the direction of windmill torque.