Sound insulation performance of plates with interconnected distributed piezoelectric patches

This paper deals with the sound insulation performance of a thin plate with intercon-nected distributed piezoelectric patches. Piezoelectric patches are periodically bonded on the sur-faces of the plate in a collocated fashion, and are interconnected via an inductive circuit network. This piezoelectric system is termed as piezo-electromechanical (PEM) plate in the paper. Homogenization methods are involved under a sub-wavelength assumption to analytically develop the dynamical equations for the PEM plate. The dispersion relationships and energy densities of the wave modes propagating in the PEM plate are studied;the sub-wavelength assumption is verified for the simulations in this paper. The coincidence frequency of the PEM plate is researched, and results show that the coincidence frequency of the PEM plate will disappear at certain circum-stances;mathematical and physical explanations are made for this phenomenon. The disappearance of the coincidence frequency is used to optimize the value of inductance, for the purpose of improv-ing the sound transmission loss of the PEM plate.     

Investigation of dynamics of discrete framed structures by a numerical wave-based method and an analytical homogenization approach

In this article, the analytical homogenization method of periodic discrete media (HPDM) and the numerical condensed wave finite element method (CWFEM) are employed to study the lon-gitudinal and transverse vibrations of framed structures. The valid frequency range of the HPDM is re-evaluated using the wave propagation feature identified by the CWFEM. The relative error of the wavenumber by the HPDM compared to that by the CWFEM is illustrated in functions of fre-quency and scale ratio. A parametric study on the thickness of the structure is carried out where the dispersion relation and the relative error are given for three different thicknesses. The dynamics of a finite structure such as natural frequency and forced response are also investigated using the HPDM and the CWFEM.     

The effects of the solar magnetic polarity and the solar wind velocity on Bz-component of the interplanetary magnetic field

We have studied the effect of both solar magnetic polarity and the solar wind velocity on the Bz-component of the interplanetary magnetic field, IMFBz, for the minimum activity of the solar cycles 21, 22, 23 and 24. We made a statistical study of IMFBz in the first section which is considered as an extension of Lyatsky et al. (2003). They made a statistical study of IMFBz for two periods of minimum solar activity 22 and 23 related to 1985–1987 and 1995–1997 when the solar magnetic field had opposite polarity. Our results seem to be consistent with the results obtained by Lyatsky et al. (2003). We found that there is a dependence of IMFBz on the IMFBx and the solar magnetic polarity for the minimum periods of the selected four solar cycles. In addition, we found that there is a dependence of IMFBz on the solar wind velocity.     

Some aspects of land transformation in the western mediterranean desert of egypt

The western Mediterranean desert of Egypt has a long history of land-use. With recent development activities, land transformation is progressing at a high rate. Monitoring of changes to allow for predictions of long-term effects of these activities is viewed at three levels: (a) quantities of ecosystem components; (b) detailed distribution of patterns of land-use, vegetation and physiography; and (c) general distribution of the salient features of land. This study provides estimates at the first (a) and second (b) levels of changes in this region due to the main land-use types: grazing rain-fed farming, and irrigated farming.Grazing had little effects on soil characters, but it resulted in lower soil stability and abundance of plants and above-soil invertebrates. Irrigation resulted in water-logging and salinization, formation of calcic horizons, decrease in soil organic matter and soluble nitrogen, and in increase of above-and below-soil biota.A comparison of the distribution of vegetation and land-use in one of the sectors in 1964 and 1981, using maps based on aerial photographs and ground-truth data, indicated remarkable changes in areas of rain-fed farming, and in vegetation composition due to over-grazing.     

Investigating the Coronal Mass Ejections associated with DH type-II radio bursts and solar flares during the ascending phase of the solar cycle 24

We studied a set of 74 CMEs, with shedding the light on the halo-CMEs (HCMEs), that are associated with decametric – hectometric (DH) type-II radio bursts (1–16?MHz) and solar flares during the period 2008–2014. The events were classified into 3 groups (disk, intermediate, and limb events) based on their longitudinal distribution.We found that the events are mostly distributed around 15.32° and 15.97° at the northern and southern solar hemispheres, respectively. We found that there is a clear dependence between the longitude and the CME’s width, speed, acceleration, mass, and kinetic energy. For the CMEs’ widths, most of the events were HCMEs (～62%), while the partial HCMEs comprised ～35% and the rest of events were CMEs with widths less than 120°. For the CMEs’ speeds, masses, and kinetic energies, the mean values showed a direct proportionality with the longitude, in which the limb events had the highest speeds, the largest masses, and the highest kinetic energies. The mean peak flux of the solar flares for different longitudes was comparable, but the disk flares were more energetic. The intermediate flares were considered as gradual flares since they tended to last longer, while the limb flares were considered as impulsive flares since they tended to last shorter.A weak correlation (R?=?0.32) between the kinetic energy of the CMEs and the duration of the associated flares has been noticed, while there was a good correlation (R?=?0.76) between the kinetic energy of the CMEs and the peak flux of the associated flares. We found a fair correlation (R?=?0.58) between the kinetic energy of the CMEs and the duration of the associated DH type-II radio bursts.     

Optimization and design of an aircraft's morphing wing-tip demonstrator for drag reduction at low speeds,Part Ⅱ-Experimental validation using Infra-Red transition measurement from Wind Tunnel tests

In the present paper, an ‘in-house' genetic algorithm was numerically and experimentally validated. The genetic algorithm was applied to an optimization problem for improving the aerodynamic performances of an aircraft wing tip through upper surface morphing. The optimization was performed for 16 flight cases expressed in terms of various combinations of speeds, angles of attack and aileron deflections. The displacements resulted from the optimization were used during the wind tunnel tests of the wing tip demonstrator for the actuators control to change the upper surface shape of the wing. The results of the optimization of the flow behavior for the airfoil morphing upper-surface problem were validated with wind tunnel experimental transition results obtained with infra-red Thermography on the wing-tip demonstrator. The validation proved that the 2D numerical optimization using the ‘in-house' genetic algorithm was an appropriate tool in improving various aspects of a wing's aerodynamic performances.     

Numerical investigation on the shock wave transition in a three-dimensional scramjet isolator

The scramjet isolator, which is used to prevent the hypersonic inlet from disturbances that arise from the pressure rise in the scramjet combustor due to the intense turbulent combustion, is one of the most critical components in hypersonic airbreathing propulsion systems. Any engineering error that is possible in the design and manufacturing procedure of the experimental model, and the intense heat release in the scramjet combustor, may cause the performance of the isolator to decrease, leading to its lack of capability in supporting the back pressure. The coupled implicit Reynolds Averaged Navier–Stokes (RANS) equations and the two-equation standard k?ε turbulent model have been employed to numerically simulate the flow fields in a three-dimensional scramjet isolator. The effects of the divergent angle and the back pressure on the shock wave transition and the location of the leading edge of the shock wave train have been estimated and discussed. The obtained results show that the present numerical results are in very good agreement with the available experimental shadow-pictures, and the numerical method is more suitable for capturing the shock wave train and predicting the location of the leading edge of the shock wave train in the scramjet isolator than the present two-dimensional numerical methods. This is due to the small width-to-height ratio of the isolator and the intense three-dimensional flow structures. On increasing the divergent angle of the scramjet isolator, the static pressure along the central symmetrical line of the isolator decreases sharply. This is due to the strong expansion wave generated at the entrance of the isolator, and when the divergent angle of the isolator is sufficiently large, namely 1.5°, a zone of negative pressure is formed just ahead of the leading edge of the shock wave train. At the same time, the shock wave train varies from being oblique to being normal, and then back to oblique. With an increase in the prescribed back pressure at the exit of the scramjet isolator, the leading edge of the shock wave train moves forward towards the entrance of the isolator, and when the back pressure is sufficiently large, unstart conditions in the hypersonic inlet can take place if the shock train reaches the inlet.     

A statistical study of post-flare-associated CME events

We present a statistical study of post-flare-associated CMEs (PFA-CMEs) during the period from 1996 to 2010. By investigating all CMEs and X-ray flares, respectively, in the LASCO and GOES archives, we found 15875 CMEs of which masses are well measured and 25112 X-ray flares of which positions are determined from their optical counterparts. Under certain temporal and spatial criteria of these CMEs and solar flare events, 291PFA-CMEs events have been selected. Linking the flare fluxes with CME speeds of these paired events, we found that there is a reasonable positive linear relation between the CME linear speed and associated flare flux. The results show also the CME width increases as the flux of its associated solar flare increases. Besides we found that there is a fine positive linear relation between the CME mass and its width. Matching the flare fluxes with CME masses of these paired events, we find the CME mass increases as the flux of its associated solar flare increases. Finally we find the PFA-CME events are in regular more decelerated than the other CMEs.     

CME–flare association during the 23rd solar cycle

The relation between coronal mass ejections (CMEs) and solar flares are statistically studied. More than 10,000 CME events observed by SOHO/LASCO during the period 1996–2005 have been analyzed. The soft X-ray flux measurements provided by the Geostationary Operational Environmental Satellite (GOES), recorded more than 20,000 flares in the same time period. The data is filtered under certain temporal and spatial conditions to select the CME–flare associated events. The results show that CME–flare associated events are triggered with a lift-off time within the range 0.4–1.0 h. We list a set of 41 CME–flare associated events satisfying the temporal and spatial conditions. The listed events show a good correlation between the CME energy and the X-ray flux of the CME–flare associated events with correlation coefficient of 0.76.