飞机燃油油量测量及姿态误差修正方法

提出了一种基于 CAD技术的航空燃油油量实时测量方法。采用三维实体造型技术 ,建立了某飞机机翼油箱模型 ,利用油量传感器的输出值及飞机姿态信息 ,对燃油油量进行实时测量及姿态误差修正。     

含有任意多个椭圆孔弹性板的应力场计算

本文应用弹性力学的复变函数理论,用多保角变换的方法,导出了含有任意多个椭圆孔的无限大弹性板多复变量应力函数的表达式。每个孔的大小、位置和孔边作用的载荷均为任意指定。板的无限远处作用有和坐标轴方向一致的均匀拉压载荷P_x,P_y和均匀剪切载荷P_(xy)。并在孔边进行复Fourier级数展开,用待定系数法确定应力函数的未知系数,从而计算弹性板的应力场。编制了相应的FORTRAN77标准化程序,进行了考题和算例分析,给出了级数的收敛状况和孔边周向应力的分布图。     

应力为几何更新过程时结构可靠度

本文讨论应力为几何更新过程时结构可靠度，获得在设计基准期［０，Ｔ］内重复应力循环发生的次数服从几何更新过程时结构可靠度表达式。     

液冷头盔致冷效能的医学研究

在45℃高温条件下,应用液冷头盔给10名被试者的头颈部致冷,散热效能较高,可带走安静时30.9％～48.3％的代谢产热。降低身体的热蓄积,减少出汗,减慢心率、直肠温度和皮肤温度的上升速率。对头颈部致冷可降低身体的热紧张度50％～70％,明显改善对温热的舒适感觉。同时表明,致冷液温、流量及液流走向,对致冷效能均有显著影响。为液冷头盔及致冷装置的设计,提供了医学实验依据。     

Further study of the Pencil-MUSIC algorithm

For finding 2-D angles and polarizations of waves arriving at a rectangular array of crossed dipoles, the Pencil-MUSIC method can achieve the near optimum performance with much less computational burden than the MUSIC (multiple signal classification). Following an angle-only ESPRIT (estimation of signal parameters via rotational invariance techniques) method, an angle-only Pencil-MUSIC can be easily formulated which is far more accurate than the former especially in the coherent case. The angle-only Pencil-MUSIC is analyzed and compared with the original Pencil-MUSIC. The new version sacrifices the polarization estimation to achieve about 8 times more efficient computation The accuracy of the new version seems no more than 4 times worse in terms of estimation deviation     

气动力星座保持的闭环控制研究

本文研究了利用气动力进行星座保持的闭环控制问题。提出了一种改进的半全局指数收敛闭环控制律，对于指定的任意大的有界域，利用不变集定理论上证明了该控制律的稳定性和抗干扰性，又提出了双ε法以提高响应速度。     

SCP－1型贴片机PLC程序的设计

介绍了在研制ＳＣＰ－１型贴片机过程中，采用可编程控制器（ＰＬＣ）对各外设进行控制的程序编制过程。着重分析了串行口通讯协议的设置，并以吸片过程为例，具体地说明了ＰＬＣ程序的编制方法。     

钣金制件表面的相贯线求作方法

本文提出钣金制件表面相贯线求作的新方法。     

图样的知识目标分类与例证性分析

根据教育目标分类学的观点分解课程教学目标，再分别对分解的目标进行例证性分析，能更客观地验证教育目标的实效性和教育过程的可行性。本文通过对图样的知识目标分类与例证性分析，为工程图学教育目标检测做一尝试。     

Implementation of a three-phase high-power-factor rectifier with NPC topology

A three-phase four-wire power factor corrector based on neutral-point-clamped (NPC) topology is adopted to reduce the current harmonics and increase the input power factor. Using the NPC topology, the voltage stress of power switches can be reduced to the half of the dc-link voltage. With the dc-link voltage controller and the phase locked loop circuit, the balanced and sinusoidal line currents can be drawn from the ac supply system under the balance and unbalance mains voltages. The hysteresis current comparators are adopted in the current control loop to track the line current commands. Three voltage levels are generated on the ac terminal to the neutral point. Simulations and experiments are provided to verify the validity and the effectiveness of the proposed control scheme.