Stochastic modelling considering ionospheric scintillation effects on GNSS relative and point positioning

Global Navigation Satellite Systems (GNSS), in particular the Global Positioning System (GPS), have been widely used for high accuracy geodetic positioning. The Least Squares functional models related to the GNSS observables have been more extensively studied than the corresponding stochastic models, given that the development of the latter is significantly more complex. As a result, a simplified stochastic model is often used in GNSS positioning, which assumes that all the GNSS observables are statistically independent and of the same quality, i.e. a similar variance is assigned indiscriminately to all of the measurements. However, the definition of the stochastic model may be approached from a more detailed perspective, considering specific effects affecting each observable individually, as for example the effects of ionospheric scintillation. These effects relate to phase and amplitude fluctuations in the satellites signals that occur due to diffraction on electron density irregularities in the ionosphere and are particularly relevant at equatorial and high latitude regions, especially during periods of high solar activity. As a consequence, degraded measurement quality and poorer positioning accuracy may result.     

Multiple moving target detection and trajectory estimation using a single SAR sensor

A novel methodology is presented for determining the velocity and location of multiple moving targets using a single strip-map synthetic aperture radar (SAR) sensor. The so-called azimuth position uncertainty problem is therefore solved. The method exploits the structure of the amplitude and phase modulations of the returned echo from a moving target in the Fourier domain. A crucial step in the whole processing scheme is a matched filtering, depending on the moving target parameters, that simultaneously accounts for range migration and compresses two-dimensional signatures into one-dimensional ones without losing moving target information. A generalized likelihood ratio test approach is adopted to detect moving targets and derive their trajectory parameters. The effectiveness of the method is illustrated with synthetic and real data covering a wide range of targets velocities and signal-to-clutter ratios (SCRs). Even in the case of parallel to platform moving target motion, the most unfavorable scenario, the proposed method yields good results for, roughly, SCR > 10 dB.     

Study of the rheological properties of water and Martian soil simulant mixtures for engineering applications on the red planet

The rheological properties of mixtures of water and the Martian soil simulant JSC-Mars-1A are investigated by preparing and testing samples at various solids concentrations. The results indicate that the dispersion is viscoelastic and, at small timescales (～0.1?s), reacts to sudden strain as an elastic solid. At longer timescales the dispersion behaves like a Bingham fluid and exhibits a yield stress. Hysteresis loops show that rapid step-changes (2?s duration) of shear-rate result in thixotropic behaviour, but slower changes (>10?s duration) can result in rheopexy. These observations are explained with the breakdown and recovery of the packing structure under stress. The rheological information is used to generate practical tools, such as the system curve and the Moody chart that can be used for designing piping systems, and calculating pump sizes and pressure requirements.     

Cubesats: Cost-effective science and technology platforms for emerging and developing nations

The development, operation, and analysis of data from cubesats can promote science education and spur technology utilization in emerging and developing nations. This platform offers uniquely low construction and launch costs together with a comparative ubiquity of launch providers; factors that have led more than 80 universities and several emerging nations to develop programs in this field. Their small size and weight enables cubesats to “piggyback” on rocket launches and accompany orbiters travelling to Moon and Mars. It is envisaged that constellations of cubesats will be used for larger science missions. We present a brief history, technology overview, and summary of applications in science and industry for these small satellites. Cubesat technical success stories are offered along with a summary of pitfalls and challenges encountered in both developed and emerging nations. A discussion of economic and public policy issues aims to facilitate the decision-making process for those considering utilization of this unique technology.     

Data and performances of selected aircraft and rotorcraft

The purpose of this article is to provide a synthetic and comparative view of selected aircraft and rotorcraft (nearly 300 of them) from past and present. We report geometric characteristics of wings (wing span, areas, aspect-ratios, sweep angles, dihedral/anhedral angles, thickness ratios at root and tips, taper ratios) and rotor blades (type of rotor, diameter, number of blades, solidity, rpm, tip Mach numbers); aerodynamic data (drag coefficients at zero lift, cruise and maximum absolute glide ratio); performances (wing and disk loadings, maximum absolute Mach number, cruise Mach number, service ceiling, rate of climb, centrifugal acceleration limits, maximum take-off weight, maximum payload, thrust-to-weight ratios). There are additional data on wing types, high-lift devices, noise levels at take-off and landing. The data are presented on tables for each aircraft class. A graphic analysis offers a comparative look at all types of data. Accuracy levels are provided wherever available.     

Keeping Ma’at: An astronomical approach to the orientation of the temples in ancient Egypt

For various reasons, Archaeoastronomy has not been one of the favourite disciplines of the Egyptologists in the past. Probably because of that, important questions such as the orientation of Egyptian temples and the relevance of astronomy in this respect had never been afforded with the necessary seriousness and deepness. The Egyptian–Spanish Mission for the Archaeoastronomy of ancient Egypt has, among its various priorities, the solution of this problem. In order to achieve that, we have measured the orientation of some 330 temples in the Valley, the Delta, the Oases and the Sinai so far. The aim is to find a correct and almost definitive answer to the question of whether the ancient Egyptian sacred constructions were astronomically aligned or not. Our data seem to answer this question in the affirmative sense. Besides, they offer a very interesting new perspective in the field of landscape archaeology, a new discipline hardly worked in Egypt so far, in which terrestrial landscape, dominated by the Nile, and celestial landscape, dominated by the sun and the stars, would combine in order to permit the establishment of Ma’at, the Cosmic Order, on Earth.     

Towards a One Percent Measurement of Frame Dragging by Spin with Satellite Laser Ranging to LAGEOS, LAGEOS 2 and LARES and GRACE Gravity Models

During the past century Einstein’s theory of General Relativity gave rise to an experimental triumph; however, there are still aspects of this theory to be measured or more accurately tested. Today one of the main challenges in experimental gravitation, together with the direct detection of gravitational waves, is the accurate measurement of the gravitomagnetic field generated by the angular momentum of a body. Here, after a brief introduction on frame-dragging, gravitomagnetism and Lunar Laser Ranging tests, we describe the past measurements of frame-dragging by the Earth spin using the satellites LAGEOS, LAGEOS 2 and the Earth’s gravity models obtained by the GRACE project. We demonstrate that these measurements have an accuracy of approximately 10%. We then describe the LARES experiment to be launched in 2010 by the Italian Space Agency for a measurement of frame-dragging with an accuracy of a few percent. We finally demonstrate that a number of claims by a single individual, that the error budget of the frame-dragging measurements with LAGEOS-LAGEOS 2 and LARES has been underestimated, are indeed ill-founded.     

First results of operational ionospheric dynamics prediction for the Brazilian Space Weather program

It is shown the development and preliminary results of operational ionosphere dynamics prediction system for the Brazilian Space Weather program. The system is based on the Sheffield University Plasmasphere–Ionosphere Model (SUPIM), a physics-based model computer code describing the distribution of ionization within the Earth mid to equatorial latitude ionosphere and plasmasphere, during geomagnetically quiet periods. The model outputs are given in a 2-dimensional plane aligned with Earth magnetic field lines, with fixed magnetic longitude coordinate. The code was adapted to provide the output in geographical coordinates. It was made referring to the Earth’s magnetic field as an eccentric dipole, using the approximation based on International Geomagnetic Reference Field (IGRF-11). During the system operation, several simulation runs are performed at different longitudes. The original code would not be able to run all simulations serially in reasonable time. So, a parallel version for the code was developed for enhancing the performance. After preliminary tests, it was frequently observed code instability, when negative ion temperatures or concentrations prevented the code from continuing its processing. After a detailed analysis, it was verified that most of these problems occurred due to concentration estimation of simulation points located at high altitudes, typically over 4000 km of altitude. In order to force convergence, an artificial exponential decay for ion–neutral collisional frequency was used above mentioned altitudes. This approach shown no significant difference from original code output, but improved substantially the code stability. In order to make operational system even more stable, the initial altitude and initial ion concentration values used on exponential decay equation are changed when convergence is not achieved, within pre-defined values. When all code runs end, the longitude of every point is then compared with its original reference station longitude, and differences are compensated by changing the simulation point time slot, in a temporal adjustment optimization. Then, an approximate neighbor searching technique was developed to obtain the ion concentration values in a regularly spaced grid, using inverse distance weighting (IDW) interpolation. A 3D grid containing ion and electron concentrations is generated for every hour of simulated day. Its spatial resolution is 1° of latitude per 1° of longitude per 10 km of altitude. The vertical total electron content (VTEC) is calculated from the grid, and plotted in a geographic map. An important feature that was implemented in the system is the capacity of combining observational data and simulation outputs to obtain more appropriate initial conditions to the ionosphere prediction. Newtonian relaxation method was used for this data assimilation process, where ionosonde data from four different locations in South America was used to improve the system accuracy. The whole process runs every day and predicts the VTEC values for South America region with almost 24 h ahead.     

Moving Targets Processing in SAR Spatial Domain

This paper presents a novel technique to estimate the initial coordinates and velocity vector of moving targets, including those with velocities above the Nyquist limit, using a single synthetic aperture radar (SAR) sensor without increasing the pulse repetition frequency (PRF). The basic reasoning is that, although the returned echoes may be undersampled in the azimuth direction, their phase and amplitude are informative with respect to the moving target trajectory parameters. Therefore, the so-called blind angle ambiguity, inherent to systems using a single SAR sensor, is overcome. The proposed method samples the data in the spatial domain, along the signature curve which depends on the moving target trajectory parameters. The resulting algorithm is a highly efficient (from the computational point of view) ID matched filter. The effectiveness of the proposed scheme is illustrated using simulated SAR data and real data from the MSTAR public release data set, corresponding to a static SAR scene and a static BTR-60 with simulated motion.