From TOPEX/Poseidon to Jason-2/OSTM in the Amazon basin

A major interest of radar altimetry over rivers is to monitor water resources and associated risk in basins where there is little or no conventional in situ data. The objective of the present study is to calibrate altimetry data in a place where conventional data are available, and use the results to estimate the potential error committed in the estimation of water levels in an ungauged or poorly gauged basin. The virtual stations extracted with Jason-2 in this study concern a very broad sample of river channel width and complexity. Minimum channel width has been estimated at 400 m. Unlike TOPEX/Poseidon (T/P), Jason-2 seems to have the capability to distinguish the river bed from its floodplain. The quality of the results obtained with Jason-2 is incomparably better than that obtained with T/P. Despite the fact that no absolute calibration has been assessed for river in this study, the bias calculated converge around 0, 35 m, which could be then the error estimated on the water stage derived from Jason-2 ranges, when no other validation is available. ICE3 algorithm seems to be performing as well as ICE1, and further research is needed to design retracking algorithm specifically for continental water.     

DORIS-based point mascons for the long term stability of precise orbit solutions

In recent years non-tidal Time Varying Gravity (TVG) has emerged as the most important contributor in the error budget of Precision Orbit Determination (POD) solutions for altimeter satellites’ orbits. The Gravity Recovery And Climate Experiment (GRACE) mission has provided POD analysts with static and time-varying gravity models that are very accurate over the 2002–2012 time interval, but whose linear rates cannot be safely extrapolated before and after the GRACE lifespan. One such model based on a combination of data from GRACE and Lageos from 2002–2010, is used in the dynamic POD solutions developed for the Geophysical Data Records (GDRs) of the Jason series of altimeter missions and the equivalent products from lower altitude missions such as Envisat, Cryosat-2, and HY-2A. In order to accommodate long-term time-variable gravity variations not included in the background geopotential model, we assess the feasibility of using DORIS data to observe local mass variations using point mascons. In particular, we show that the point-mascon approach can stabilize the geographically correlated orbit errors which are of fundamental interest for the analysis of regional Mean Sea Level trends based on altimeter data, and can therefore provide an interim solution in the event of GRACE data loss. The time series of point-mass solutions for Greenland and Antarctica show good agreement with independent series derived from GRACE data, indicating a mass loss at rate of 210 Gt/year and 110 Gt/year respectively.     

GPS-based sea level measurements to help the characterization of land contamination in coastal areas

The Corsica site has been established in 1996 to perform altimeter calibration on TOPEX/Poseidon and then on its successors Jason-1 and Jason-2. The first chosen location was under the #85 ground track that overflight the Senetosa Cape. In 2005, it was decided to develop another location close to Ajaccio, to be able to perform the calibration of Envisat and in a next future of SARAL/AltiKa that will flight over the same ground tracks. Equipped with various instruments (tide gauges, permanent GPS, GPS buoy, weather station…) the Corsica calibration site is able to quantify the altimeter Sea Surface Height bias but also to give an input on the origin of this bias (range, corrections, orbits, …). Due to the size of Corsica (not a tiny island), the altimeter measurement system (range and corrections) can be contaminated by land. The aim of this paper is to evaluate this land contamination by using GPS measurements from a fixed receiver on land and from another receiver onboard a life buoy. Concerning the altimeter land contamination, we have quantify that this effect can reach 8 mm/km and then affects the Sea Surface Height bias values already published in the framework of the Corsica calibration site by 5–8 mm for TOPEX and Jason missions. On the other hand, the radiometer measurements (wet troposphere correction) are also sensitive to land and we have been able to quantify the level of improvement of a dedicated coastal algorithm that reconciles our results with those coming from other calibration sites. Finally, we have also shown that the standard deviation of the GPS buoy sea level measurements is highly correlated (∼87%) with the Significant Wave Height derived from the altimeters and can be used to validate such parameter.     

Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI)

The Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI) is a five telescope package, which has been developed for the Solar Terrestrial Relation Observatory (STEREO) mission by the Naval Research Laboratory (USA), the Lockheed Solar and Astrophysics Laboratory (USA), the Goddard Space Flight Center (USA), the University of Birmingham (UK), the Rutherford Appleton Laboratory (UK), the Max Planck Institute for Solar System Research (Germany), the Centre Spatiale de Leige (Belgium), the Institut d’Optique (France) and the Institut d’Astrophysique Spatiale (France). SECCHI comprises five telescopes, which together image the solar corona from the solar disk to beyond 1 AU. These telescopes are: an extreme ultraviolet imager (EUVI: 1–1.7 R_⊙), two traditional Lyot coronagraphs (COR1: 1.5–4 R_⊙ and COR2: 2.5–15 R_⊙) and two new designs of heliospheric imagers (HI-1: 15–84 R_⊙ and HI-2: 66–318 R_⊙). All the instruments use 2048×2048 pixel CCD arrays in a backside-in mode. The EUVI backside surface has been specially processed for EUV sensitivity, while the others have an anti-reflection coating applied. A multi-tasking operating system, running on a PowerPC CPU, receives commands from the spacecraft, controls the instrument operations, acquires the images and compresses them for downlink through the main science channel (at compression factors typically up to 20×) and also through a low bandwidth channel to be used for space weather forecasting (at compression factors up to 200×). An image compression factor of about 10× enable the collection of images at the rate of about one every 2–3 minutes. Identical instruments, except for different sizes of occulters, are included on the STEREO-A and STEREO-B spacecraft.     

Jason-2 DORIS phase measurement processing

The DORIS instrument on Jason-2 is the first of a new generation. The satellite receivers have now seven simultaneous measurement channels, with synchronous dual frequency phase and pseudo-range measurements. These measurements are now described in a similar manner as GPS measurements and an extension of the RINEX 3.0 format has been defined for DORIS. Data are available to users with a shorter latency.     

Compliance of disposal orbits with the French Space Operations Act: The Good Practices and the STELA tool

Space debris mitigation is one objective of the French Space Operations Act (FSOA), in line with Inter-Agency Space Debris Coordination Committee (IADC) recommendations, through the removal of non-operational objects from populated regions. At the end of their mission, space objects are to be placed on orbits that will minimize future hazards to space objects orbiting in the same region. The FSOA, which came into force in 2010, ensures that technical risks associated with space activities are properly mitigated. The Act confers CNES a central support role in providing technical expertise to government on regulations dealing with space operations. In order to address the compliance of disposal orbits with the law technical requirements, CNES draws up Good Practices as well as a dedicated tool, Semi-analytic Tool for End of Life Analysis (STELA).