直接力控制飞机非常规响应耦合敏感性分析

 针对当前直接力控制系统设计实践中遇到的直接力控制（ＤＦＣ）飞机非常规响应耦合敏感性问题，借助闭环系统动力学和瞄准误差动力学理论进行推导与分析，进而通过实例计算，得出可供ＤＦＣ系统设计及飞机飞行品质评定参考的重要结论。     

Identification of Information-Seeking Behaviors from Air Traffic Controllers′ Eye Movements

Air traffic controllers are the important parts of air traffic management system who are responsible for the safety and efficiency of the system.They make traffic management decisions based on information acquired from various sources.The understanding of their information seeking behaviors is still limited.We aim to identify controllers′ behavior through the examination of the correlations between controllers′eye movements and air traffic.Sixteen air traffic controllers were invited to participate real-time simulation experiments,during which the data of their eye ball movements and air traffic were recorded.Tweny-three air traffic complexity metrics and six eye movements metrics were calculated to examine their relationships.Two correlational methods,Pearson′s correlation and Spearman′s correlation,were tested between every eye-traffic pair of metrics.The results indicate that controllers′two kinds of information-seeking behaviors can be identified from their eye movements:Targets tracking,and confliction recognition.The study on controllers′ eye movements may contribute to the understanding of information-seeking mechanisms leading to the development of more intelligent automations in the future.     

EXPERIMENTAL STUDY OF FLOW FIELDS IN THE VICINITY OF A FILM COOLING HOLE EXIT

Sofar,filmcoolingisextensivelyadoptedforprotectinghightemperaturepartsingasturbine.Manyresearchworksarefocusedonflow[1~3Jandheattransfer[4'5jinthedownstreamofthecircularhole,buttheflowcharacteristicsattheholeexit,especiallyforflaredholeexit,arenotreportedatpresent.Inordertodesignasuitab1eholeshapeforpracticalcoolingandprovideplentyexperimentaldataforverificationofcomputercodes,adetai1edexperimentalin-vestigationabout3-Dflowfieldsattheexitofasinglecircularandfan-shapedholehasbeencompleted.1Exp…     

AN IMPROVEMENT FOR LOWER－ORDER PANEL METHOD BASED ON THE DIRICHLET BOUNDARY CONDITION

ＡＮＩＭＰＲＯＶＥＭＥＮＴＦＯＲＬＯＷＥＲ－ＯＲＤＥＲＰＡＮＥＬＭＥＴＨＯＤＢＡＳＥＤＯＮＴＨＥＤＩＲＩＣＨＬＥＴＢＯＵＮＤＡＲＹＣＯＮＤＩＴＩＯＮＸｕＭｉｎｇｃｈｕ，ＧｕＷｅｎｙｉｎｇ（ＮｏｒｔｈｗｅｓｔｅｒｎＰｏｌｙｔｅｃｈｎｉｃａｌＵｎｉｖｅｒ...     

Effect of tube-electrode inner diameter on electrochemical discharge machining of nickel-based superalloy

Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. How-ever, the high machining requirement of a large number of film cooling holes can be extremely chal-lenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machin-ing process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined prod-ucts. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are inves-tigated. The results show that larger inner diameters could effectively improve the flushing condi-tion and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diam-eter of the tube electrode.     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

NUMERICAL SIMULATION ON MULTI-FLUID INTERFACES

INTRODUCTIONThe study on phenomenon of multi- fluid in-terface driven by shock waves include:( 1 ) totrack the motion of multimaterial interfaces;( 2 )to simulate the chemical reaction on the inter-faces. As the pioneering work,chemical reactionis neglected in this paper. The objective is totrack the interfaces. Of course,the fluids aretreated as compressible medium under such ahigh impact.Although Eulerian schemes workwell for most gas flows,they have been shownto be too dissipative nea…     

TEMPERATURE EFFECT ON OXIDATION PROTECTION LIFE OF MULTI-LAYER COATING FOR C/C COMPOSITES

Carbon-carboncomposites(C/C)exhibitexcellentstructuralpropertiesabove165OC,andareconsideredasthemostpromisingcandidatematerialsforthehighthrust-weightratioturbineengines.Asakeytechnologyforthehigh-temperaturestructuralapplicationsofC/C,oxidationprotectionispaidmoreandmoreattentionrecently.TheoxidationprotectionllfeofacoatedC/Cisdeterminedbyenvironmenta1temperature,becauseitnotonlydecidesthether-mochemicalconditionsofinterfacesinacoating,butalsocontrolsthedynamicprocessofoxy-gendiffusion.The…     

Trajectory control strategy of cathodes in blisk electrochemical machining

A turbine blisk, which combines blades and a disk together, is one of the most important components of an aero engine. In the process of blisk electrochemical machining (ECM), the sheet cathode, which is usually used as a tool electrode, has a complicated structure. In addition to that, the channel between the adjacent blades is narrow and twisted, so interference is apt to happen when the sheet cathode feeds into the channel. Therefore, it is important to choose suitable trajectory control strategy. In this paper, a new trajectory control strategy of the sheet cathode is presented and corresponding simulation analysis is conducted on the basis of an actual blisk model. The simulation results demonstrate that the sheet cathode can feed into the channel by a spatial line trajectory without interference. Moreover, the verification experiments are carried out according to the simulation. The experimental results show that the cathode can move into the channel without interference. It is verified that the new trajectory control strategy is correct and can be used in the blisk ECM process successfully.     

A Fast Global Node Selection Algorithm for Bearings-only Target Localization

In the target tracking, the nodes aggregate their observations of the directions of arrival of the target. The network then uses an extended Kalman filter （EKF） to combine the measurements from multiple snapshots to track the target. In order to rapidly select the best subset of nodes to localize the target with the minimum mean square position error and low power consumption, this paper proposes a simple algorithm, which uses the location information of the target and the network. The lower botmd of localization error is utilized according to the distances between the target and the selected active nodes. Furthermore, the direction likelihoods of the active nodes is predicted by way of the node/target bearing distributing relationships.