降低NEPE推进剂燃速的途径探讨

通过对NEPE推进剂燃烧表面的热平衡分析，指出了影响推进剂燃速的3个因素：“嘶嘶”区（fizz）的温度梯度、凝聚相反应热和燃面温度，提高了降低NEPE推进剂燃速的可能途径，研究了某些燃速降速剂的作用及其对推进剂能量的影响。用实验证明了降低燃速几个途径的可行性。     

推进剂功能组分作用机理研究——(Ⅱ)丁羟/铝粉体系

在丁羟 /铝粉组成的实验体系中 ,通过测定药浆流变性的变化 ,研究了一些功能组分在推进剂中的作用机理。结果表明 ,醇胺络合物TEA·BF3 是推进剂中铝粉的偶联剂 ,在其它功能组分存在的条件下 ,仍能竞争吸附于铝粉颗粒表面。实验发现 ,在Al/HTPB/IPDI体系药浆中 ,TEA·BF3 与MAPO间存在明显的协同效应 ,使药浆流变性能显著恶化。文中对其它一些功能组分在药浆中的作用机理也进行了分析探讨。     

二硝酰胺铵(ADN)球形化工艺研究

介绍了近年来国外关于二硝酰胺铵（ADN）球形化的工艺方法，重点讨论了中间介质、分散剂、表面活性剂和热稳定剂的作用及其选择方法。     

Magnetic field experiment on the Freja satellite

Freja is a Swedish scientific satellite mission to study fine scale auroral processes. Launch was October 6, 1992, piggyback on a Chinese Long March 2C, to the present 600×1750 km, 63° inclination orbit. The JHU/APL provided the Magnetic Field Experiment (MFE), which includes a custom APL-designed Forth, language microprocessor. This approach has led to a truly generic and flexible design with adaptability to differing mission requirements and has resulted in the transfer of significant ground analysis to on-board processing. Special attention has been paid to the analog electronic and digital processing design in an effort to lower system noise levels, verified by inflight data showing unprecedented system noise levels for near-Earth magnetic field measurements, approaching the fluxgate sensor levels. The full dynamic range measurements are of the 3-axis Earth's magnetic field taken at 128 vector samples s^–1 and digitized to 16 bit, resolution, primarily used to evaluate currents and the main magnetic field of the Earth. Additional 3-axis AC channels are bandpass filtered from 1.5 to 128 Hz to remove the main field spin signal, the range is±650 nT. These vector measurements cover Pc waves to ion gyrofrequency magnetic wave signals up to the oxygen gyrofrequency (40 Hz). A separate, seventh channel samples the spin axis sensor with a bandpass filter of 1.5 to 256 Hz, the signal of which is fed to a software FFT. This on-board FFT processing covers the local helium gyrofrequencies (160 Hz) and is plotted in the Freja Summary Plots (FSPs) along with disturbance fields. First data were received in the U.S. October 16 from Kiruna, Sweden via the Internet and SPAN e-mail networks, and were from an orbit a few hours earlier over Greenland and Sweden. Data files and data products, e.g., FSPs generated at the Kiruna ground station, are communicated in a similar manner through an automatic mail distribution system in Stockholm to PIs and various users. Distributed management of spacecraft operations by the science team is also achieved by this advanced communications system.An exciting new discovery of the field-aligned current systems is the high frequency wave power or structure associated with the various large-scale currents. The spin axis AC data and its standard deviation is a measure of this high-frequency component of the Birkeland current regions. The exact response of these channels and filters as well as the physics behind these wave and/or fine-scale current structures accompanying the large-scale currents is being pursued; nevertheless, the association is clear and the results are used for the MFE Birkeland current monitor calculated in the MFE microprocessor. This monitor then sets a trigger when it is greater than a commandable, preset threshold. This event flag can be read by the system unit and used to remotely command all instruments into burst mode data taking and local memory storage. In addition,Freja is equipped with a 400 MHz Low Speed Link transmitter which transmits spacecraft hcusekeeping that can be received with a low cost, portable receiver. These housekeeping data include the MFE auroral zone current detector; this space weather information indicates the location and strength of ionospheric current systems that directly impact communications, power systems, long distance telephone lines and near-Earth satellite operations. The JHU/APL MFE is a joint effort with NASA/GSFC and was co-sponsored by the Office of Naval Research and NASA/Headquarters in cooperation with the Swedish National Space Board and the Swedish Space Corporation.Freja Magnetic Field Experiment Team     

Operating characteristics of a high radius pre-swirl cooling system

An experimental investigation into pre-swirl effectiveness and receiver hole discharge coefficient characteristics for a high radius injection pre-swirl cooling systems was carried out on a physically representative experimental rig with a 450 mm diameter rotor.The receiver holes and pre-swirl nozzle were located at a radius of 181 mm and 180 mm respectively.The experimental work was mainly conducted at 5 000～12 000 r/min,4 bar absolute pressure and 1.132 kg/s air supply.The maximum air supply temperature was 190 ℃.Pressure and temperature distributions in the pre-swirl system were examined with an emphasis on the velocity effectiveness of the pre-swirl system as a whole and on the discharge coefficients of the rotating 'receiver holes' in the rotor.The results showed that the velocity effectiveness increased with increasing swirl ratio resulting in reduced blade cooling flow temperature.Different seal flow configurations caused very different effectiveness at different speeds,but outflow through the inner and outer seals always gave the highest effectiveness compared other configurations.Increasing the seal flow rate reduced the effectiveness.For the coefficient of discharge,except for the low speed range,it increased with increase in swirl ratio for most speeds.      

Mapping lunar surface chemistry: New prospects with the Chandrayaan-2 Large Area Soft X-ray Spectrometer (CLASS)

Surface chemistry of airless bodies in the solar system can be derived from remote X-ray spectral measurements from an orbiting spacecraft. X-rays from planetary surfaces are excited primarily by solar X-rays. Several experiments in the past have used this technique of X-ray fluorescence for deriving abundances of the major rock forming elements. The Chandrayaan-2 orbiter carries an X-ray fluorescence experiment named CLASS that is designed based on results from its predecessor C1XS flown on Chandrayaan-1. We discuss the new aspects of lunar science that can be potentially achieved with CLASS.     

刚性太阳电池阵基板的研究

文章简要地叙述碳纤维复合材料刚性太阳电池阵基板的结构设计,理论分析,模态试验和振动试验。理论分析和试验结果比较一致。通过试验还解决了基板各种复合材料的力学性能测试问题,取得了必要的数据。     

双模态冲压发动机燃烧室流场数值模拟研究

在三维、粘性、湍流及有化学反应的Navier-Stokes方程基础上，通过有限化学反应速率／涡扩散模型模化湍流燃烧，对以H2为燃料的双模态冲压发动机燃烧室流场进行了研究，分析了空燃比、燃料入射角、飞行马赫数对燃烧室工作模态的影响，并分析了燃烧室隔离段的作用。     

推进剂功能组分作用研究(Ⅳ)--工艺/力学性能

在丁羟/铝粉/高氯酸铵组成的三组元推进剂体系中,通过药浆流变性测试、动态力学分析（DMA）、单向拉伸性能、凝胶分数和相对交联密度的测定,研究了一些功能组分如氮丙啶类化合物MAPO、醇胺络合物TEA·BF3、胺类化合物H对推进剂工艺性能和力学性能的影响.结果表明,MAPO可以降低药浆屈服值和表观粘度,改善工艺性能,显著增加最大抗拉强度,但对最大伸长率无影响;TEA·BF3大幅度增加药浆屈服值,使工艺性能变差,一定程度上提高最大抗拉强度和发挥熵弹性而增加最大伸长率,H可以显著改善推进剂工艺性能和增加最大伸长率.文中还对功能组分在推进剂中的作用机理进行了分析探讨.     

丁羟推进剂粘合剂网络结构调控方法探讨

把扩链剂的使用作为调整丁羟推进剂粘合剂网络及其形态结构的一个重要手段。采用扩链剂、交联剂和真实固化参数(Rt)等综合的方法调控丁羟推进剂性能,可望比单纯控制名义固化参数(Ro)获得更好的力学性能及其稳定性。推导了丁羟推进剂粘合剂系统网络调整的通用计算公式和各种特定条件下的计算公式。