庄河、光明山陨石的岩石矿物学研究

庄河陨石和光明山陨石是两个降落于同一地区的Ｈ５型普通球粒陨石．根据两辉石温度计求出这两个陨石的平衡温度＜ ５００℃；根据镍纹石的带宽与组成关系，获得光明山陨石在其母体中的冷却速率约为 １０－１０℃／Ｍａ，而庄河陨石中普遍出现均一的四方镍纹石表明其冷却速率更低．光明山陨石的冲击变质特征以硅酸盐颗粒破碎为主，其冲击相为Ｓ１；庄河陨石中硅酸盐矿物具明显的波状消光，并存在细小的冲击熔融脉，其冲击相划分为Ｓ２．     

Multimodal characteristics of a piezoelectric lead zirconate titanate element impacted with iron particles having velocities above 20 km/s

The responses of a piezoelectric lead zirconate titanate (PZT) element to hypervelocity collisions were experimentally studied. In this study, the particles of masses ranging from 0.3 to 10 fg were made to collide with PZT at velocities between 20 and 96 km/s. The amplitude and the corresponding rise time of the single-pulse output signals that were produced in the piezoelectric PZT element were measured to determine the possible collision states. The results revealed an apparently multimodal output; three classes were assumed to be involved in the pulse formation mechanism. The amplitude and rise time were sensitive to the collision velocity. The multimodal behavior implied that the PZT-based cosmic dust detectors should be calibrated according to the class they belong to.     

Mechanism for assembling antenna in space

The development of large and precise space antennas is one of the most important topics in constructing space infrastructures. We evaluated an approach to assembling large and accurate space antennas which uses space robots. The assembly mechanism was launched together with the ETS-VII, the first telerobotic satellite from Japan, and its performance, including fully automatic assembling, was verified. The assembling-type antenna and the results of antenna assembly experiments are discussed     

ETS-II Experiments Part II: Earth Station Facilities

A part of the Earth station at the Kashima Branch of the Radio Research Laboratories has a highly sensitive receiving system newly designed for receiving 3 coherent and weak beacon signals transmitted from the Engineering Test Satellite Type-II (ETS-II) of Japan and obtaining propagation data on quasimillimeter and millimeter wavelengths. The ground system includes a main receiving station which has a 10-m diameter antenna for multifrequencies, highly sensitive receivers, a rain radar, which has many unique functions, a radiometer, meteorological instruments, and data processing computers. The facilities of the main receiving station for ETS-II propagation experiments, except for the rain radar, are described.     

Communications and radio determination system using twogeostationary satellites. I. System and experiments

We developed two types of hybrid terminals that can provide both satellite communication and position determination services in one system. One terminal uses the single channel per carrier (SCPC) technique and the other uses the spread spectrum (SS) technique. To evaluate the performance of the two systems, we carried out experiments in Japan and in the Pacific Ocean using two geostationary satellites, ETS-V (150°E) and Inmarsat (180°E). The ranging accuracy between the mobile terminals and the base station via the satellites was found to be about 200 m using the SCPC system and about 10 m using the SS system. The measured positioning accuracy was about 1 km in the SCPC system and about 600 m in the SS system when experiments were carried out near Japan. The experimental results show that the positioning errors were mainly caused by the orbital determination errors of the two satellites. Presented here are the configurations and features of the SCPC and SS terminals, the experimental system, and the experimental results     

Analytical expression for distant retrograde orbits around a small natural satellite

An analytical expression for distant retrograde orbits (DROs) is obtained in this study. Owing to the fact that a planar DRO is a closed orbit and can be expressed as an approximately elliptical orbit, respective geometries and periods of DROs are analytically calculated. A switching point, where various properties of planar DROs change abruptly with an increase in the orbital radius, is determined. The Mars–Deimos system is taken as a case study in this work. The proposed method can be applied to cases where the Hill’s approximation of the restricted three-body problem is valid. Numerical calculations are performed to validate the proposed method.     

Radio-scintillation observations of interplanetary disturbances

Recent developments in the studies of interplanetary disturbances by scintillation (IPS) techniques are briefly reviewed. The turbulent post-shock region of an interplanetary disturbance produces transient enhancements in the scintillation level and the flow speed in many cases. An empirical method to determine three-dimensional angular distribution of propagation speed of the disturbance on the basis of IPS measurements of post-shock flow speeds is applied to 17 events which took place in 1978–1981. Among them, four representative examples including two events which were associated with disappearing solar filaments are described in detail. Several disturbances had oblate configurations; the latitudinal extent is smaller than the longitudinal extent. On an average, the angular distribution of propagation speed at 1 AU heliocentric distance is quasi-isotropic over a longitudinal range of 100° centered at the normal of relevant solar phenomenon. The net excess mass and energy in an interplanetary disturbance associated with a disappearing solar filament can be comparable to those of an interplanetary disturbance associated with a large solar flare.     

A space station experiment on large antenna assembly and measurement

The large assembly antenna in space can meet future requirements of both high frequency and large aperture. This paper proposes an experiment on assembling a large antenna at the Space Station, and discusses a realizable procedure of the experiment. The objective of this experiment is that a large antenna of a 10-m diameter is assembled in space and at the same time problems occurring in the assembling process are clarified by conducting the following experiments: assembly of test articles by manipulators, measurement of both mechanical and electrical performance of the assembled antenna, test of the pointing control system, and operational test. In the operational test, the weather radar development test and the large aperture microwave radiometer development test are conducted. Furthermore, the problem areas and items of further study are discussed in this paper.     

Influence of curved thin-film device on deformation of a solar sail

A spinning solar sail IKAROS’s membrane is estimated to unexpectedly deform into an inverted pyramid shape due to thin-film devices with curvature, such as thin-film solar cells and steering devices on the membrane. It is important to investigate the deformation caused by the curved thin-film devices and predict the sail shape because the out-of-plane deformation greatly affects solar radiation pressure (SRP) and SRP torque. The purpose of this paper is to clarify the relationship between the global shape and orientation and position of curved thin-film devices and to evaluate SRP torque on the global shape using finite element analysis. The global shape is evaluated based on the out-of-plane displacement and the SRP torque. When the curved thin-film devices make the membrane shrink in the circumferential, diagonal, and radial direction, the sail deforms into a pyramid shape, an inverted pyramid one, and a saddle one, respectively. The saddle shape is more desirable for solar sails than the inverted pyramid shape and the pyramid one from the viewpoint of shape stability to SRP and control of SRP torque in the normal direction of the sail (windmill torque). The position of the thin-film device tends to increase the absolute value of windmill torque when it is biased circumferentially from the petal central axis. The suggested design principles for the arrangement of thin-film devices is that the curved thin-film devices should be directed so that the sail shrinks in the radial direction in order to deform the sail into a saddle shape with high shape stability, and the position of the thin-film devices should be biased in the circumferential direction paying attention to the absolute value of windmill torque to determine the direction of windmill torque.     

Structure and NIR feature of QCC: a laboratory analog of carbon dust.

We have produced thin films of quenched carbonaceous composite (QCC) by hydrocarbon plasma deposition. The effect of thermal annealing on QCC has been investigated to understand how QCC, as a laboratory analog of carbon dust, is transformed in the warm environment around evolved stars. Spectroscopic measurements have indicated that, by heating, the proportion of aromatic sp2 CH bonds increases relative to sp3 CH bonds. Carbon onion-like spherules of approximately 10 nm in diameter are found with electron microscopic images after "graphitization" of thermal annealing.