Near Infrared Spectrometer for the Near Earth Asteroid Rendezvous Mission

The Near-Infrared Spectrometer (NIS) instrument on the Near-Earth Asteroid Rendezvous (NEAR) spacecraft is designed to map spectral properties of the mission target, the S-type asteroid 433 Eros, at near-infrared wavelengths diagnostic of the composition of minerals forming S asteroids. NIS is a grating spectrometer, in which light is directed by a dichroic beam-splitter onto a 32-element Ge detector (center wavelengths, 816–1486 nm) and a 32-element InGaAs detector (center wavelengths, 1371–2708 nm). Each detector reports a 32-channel spectrum at 12-bit quantization. The field-of-view is selectable using slits with dimensions calibrated at 0.37° × 0.76° (narrow slit) and 0.74° × 0.76° (wide slit). A shutter can be closed for dark current measurements. For the Ge detector, there is an option to command a 10x boost in gain. A scan mirror rotates the field-of-view over a 140° range, and a diffuse gold radiance calibration target is viewable at the sunward edge of the field of regard. Spectra are measured once per second, and up to 16 can be summed onboard. Hyperspectral image cubes are built up by a combination of down-track spacecraft motion and cross-track scanning of the mirror. Instrument software allows execution of data acquisition macros, which include selection of the slit width, number of spectra to sum, gain, mirror scanning, and an option to interleave dark spectra with the shutter closed among asteroid observations. The instrument was extensively characterized by on-ground calibration, and a comprehensive program of in-flight calibration was begun shortly after launch. NIS observations of Eros will largely be coordinated with multicolor imaging from the Multispectral Imager (MSI). NIS will begin observing Eros during approach to the asteroid, and the instrument will map Eros at successively higher spatial resolutions as NEAR's orbit around Eros is lowered incrementally to 25 km altitude. Ultimate products of the investigation will include composition maps of the entire illuminated surface of Eros at spatial resolutions as high as 300 m.     

The capabilities of a gas scintillation camera for cosmic X-ray astronomy

The capabilities of a gas scintillator camera for use in X-ray astronomy are investigated. Detailed experimental results are presented on both the position and energy resolution over the energy range 0.28 to 6 keV. The energy resolution varies from 38% to 9.5% for 0.28 keV C-K and 6 keV X-rays respectively. Position resolutions of 1.8 mm and 3.5 mm for 6 keV and 1.5 keV Al-K X-rays were obtained. Image quality and uniformity over the camera aperture are also discussed, whilst further techniques leading to improvements in position resolution are outlined. Finally applications of these cameras in conjunction with grazing incidence and coded mask X-ray optics are discussed.     

Cosmic X-ray observations performed with a gas scintillation spectrometer

Observations of the spectrum of CAS-A in the X-ray energy range 3 to 10 keV have been made using two gas scintillation proportional counters flown on an Aries rocket. Analysis of the data from the 180 second observation has resolved the emission features at 7 keV, which results from transitions in highly ionised iron.     

Multi-Spectral Imager on the Near Earth Asteroid Rendezvous Mission

A multispectral imager has been developed for a rendezvous mission with the near-Earth asteroid, 433 Eros. The Multi-Spectral Imager (MSI) on the Near-Earth Asteroid Rendezvous (NEAR) spacecraft uses a five-element refractive optical telescope, has a field of view of 2.93 × 2.25°, a focal length of 167.35 mm, and has a spatial resolution of 16.1 × 9.5 m at a range of 100 km. The spectral sensitivity of the instrument spans visible to near infrared wavelengths, and was designed to provide insight into the nature and fundamental properties of asteroids and comets. Seven narrow band spectral filters were chosen to provide multicolor imaging and to make comparative studies with previous observations of S asteroids and measurements of the characteristic absorption in Fe minerals near 1 µm. An eighth filter with a much wider spectral passband will be used for optical navigation and for imaging faint objects, down to visual magnitude of +10.5. The camera has a fixed 1 Hz frame rate and the signal intensities are digitized to 12 bits. The detector, a Thomson-CSF TH7866A Charge-Coupled Device, permits electronic shuttering which effectively varies the dynamic range over an additional three orders of magnitude. Communication with the NEAR spacecraft occurs via a MIL-STD-1553 bus interface, and a high speed serial interface permits rapid transmission of images to the spacecraft solid state recorder. Onboard image processing consists of a multi-tiered data compression scheme. The instrument was extensively tested and calibrated prior to launch; some inflight calibrations have already been completed. This paper presents a detailed overview of the Multi-Spectral Imager and its objectives, design, construction, testing and calibration.     

An imaging gas scintillation proportional counter coupled to a channel multiplier array for application in cosmic X-ray spectroscopy

The development of an imaging gas scintillation proportional counter which utilises a channel multiplier array as the readout element is discussed. Preliminary experimental results and theoretical considerations indicate that spatial and energy resolutions of below 500 μm and 8% respectively should be achievable at an X-ray energy of 6 keV.     

The interstellar heliopause probe technology reference study

The interstellar heliopause probe (IHP) is one of ESA’s technology reference studies (TRS). The TRS aim to focus the development of strategically important technologies of relevance to future science missions by studying technologically demanding and scientifically interesting missions that are currently not part of the science mission programme.

Equipped with a highly integrated payload suite (HIPS), the IHP will perform in situ exploration of the heliopause and the heliospheric interface. The HIPS, which is a standard element in all TRSs, miniaturize payloads through resource reduction by using miniaturized components and sensors, and by sharing common structures and payload functionality.

To achieve the scientific requirements of the mission, the spacecraft is to leave the heliosphere as close to the heliosphere nose as possible and reach a distance of 200 AU from the Sun within 25 years. This is possible by using a trajectory with two solar flybys and a solar sail with characteristic acceleration of 1.1 mm/s², which corresponds to a 245 × 245 m² solar sail and a sail thickness of 1–2 μm. The trajectory facilitates a modest sail design that could potentially be developed in a reasonable timeframe.

In this paper, an update to the results of studies being performed on this mission will be given and the current mission baseline and spacecraft design will be described. Furthermore, alternative solar sail systems and enabling technologies will be discussed.     

EXOSAT results on the X-ray burster 2S1254-690

EXOSAT observations of 2S1254-690 in August 1984 have confirmed the presence of periodic dips in the X-ray intensity. These dips occurred with a period of 3.9 hours and last for about 50 minutes. During individual dips the observed X-ray flux oscillated several times between the quiescent level and an undetectable level on time scales varying from a few seconds to approximately 5 minutes. In addition, a second type one burst has been observed, with characteristics which are very similar to those observed earlier. In this paper we report the results of a 20 hour EXOSAT observation made in 1984 August 6th to 7th, and discuss some properties of the dips and of the burst.affiliated to the Astrophysics Division, Space Science Department, ESA     

The variable iron line in cygnus X-3

Cygnus X-3 was observed with the GSPC on board EXOSAT on several occasions, one observation lasting for 7 orbital cycles. The width W and centroid energy E of the iron emission feature near 6.7 keV show a smooth, correlated, sinusoidal-type modulation, the iron line being widest and E being lowest just before X-ray maximum. The line profile may show a low-energy wing, but apart from this does not deviate strongly from a symmetric, Gaussian-type shape. The continuum at higher energies than the line is not completely smooth, but shows bumps which remain stable in time. Two possible explanations are discussed for the correlated variation of E and W as a function of orbital phase.     

Spectral variability of scorpius X-1, as observed with EXOSAT

EXOSAT measurements of Sco X-1 have been carried out with the 500 l/mm and 1000 l/mm grating spectrometers and simultaneously with the gas scintillation proportional counter (GSPC) on two occasions in August 1983. The first observing period, part of the instrument performance verification phase, on August 7 and 8, 1983, lasted for about twenty two hours and showed the source flaring during the first six hours. During the second observing period, August 29 and 30, 1983, the source was again active during part of the time. The lightcurves of the spectrometers and the GSPC show some correlation during the flaring activity. The grating spectra show clear emission features between 12 and 20 Å, which vary with time. When fitting the observed spectra to a thermal bremsstrahlungs model (exponential with gaunt factor) together with absorption by neutral matter, a reduced abundance of oxygen in the absorbing matter with respect to Solar is required.