Interstellar grains in the solar system: Requirements for an analysis

We discuss present knowledge about interstellar dust grains in the heliosphere in order to give goals for future investigations. As far as the identification of the interstellar flux from brightness observations is concerned we calculate the influence of interstellar dust entering the solar system on the Zodiacal light and Zodiacal emission brightness. In case of the Zodiacal light produced by the scattering of solar radiation, the brightness from interstellar dust within the solar system is not detectable within the limits of present observations. In the case of the thermal emission a distinction of the brightness from the interstellar dust component may be possible. This would be especially interesting for an analysis of the overall spatial distribution of the interstellar flux in the solar system. As far as the identification of the interstellar flux from impact experiments is concerned, parameters like the impact direction are essential. Since the interstellar dust flux is modified in the outer solar system already, it is helpful to probe its variation with increasing distance from the Sun in interstellar upstream direction.     

Interplanetary medium – A dusty plasma

The average mass of dust per volume in space equals that of the solar wind so that the interplanetary medium should provide an obvious region to study dust plasma interactions. While dust collective behavior is typically not observed in the interplanetary medium, the dust component rather consists of isolated grains screened by and interacting with the plasma. Space measurements have revealed several phenomena possibly resulting from dust plasma interactions, but most of the dust plasma interactions are at present not quantified. Examples are the production of neutrals and pick-up ions from the dust, dust impact generated field variations at spacecraft and magnetic field variations possibly caused by solar wind interacting with dust trails. Since dust particles carry a surface charge, they are exposed to the Lorentz force in the interplanetary magnetic field and for grains of sub-micrometer sizes acceleration can be substantial.     

Dust Near The Sun

We review the current knowledge and understanding of dust in the inner solar system. The major sources of the dust population in the inner solar system are comets and asteroids, but the relative contributions of these sources are not quantified. The production processes inward from 1 AU are: Poynting-Robertson deceleration of particles outside of 1 AU, fragmentation into dust due to particle-particle collisions, and direct dust production from comets. The loss processes are: dust collisional fragmentation, sublimation, radiation pressure acceleration, sputtering, and rotational bursting. These loss processes as well as dust surface processes release dust compounds in the ambient interplanetary medium. Between 1 and 0.1 AU the dust number densities and fluxes can be described by inward extrapolation of 1 AU measurements, assuming radial dependences that describe particles in close to circular orbits. Observations have confirmed the general accuracy of these assumptions for regions within 30° latitude of the ecliptic plane. The dust densities are considerably lower above the solar poles but Lorentz forces can lift particles of sizes < 5 μm to high latitudes and produce a random distribution of small grains that varies with the solar magnetic field. Also long-period comets are a source of out-of-ecliptic particles. Under present conditions no prominent dust ring exists near the Sun. We discuss the recent observations of sungrazing comets. Future in-situ experiments should measure the complex dynamics of small dust particles, identify the contribution of cometary dust to the inner-solar-system dust cloud, and determine dust interactions in the ambient interplanetary medium. The combination of in-situ dust measurements with particle and field measurements is recommended.     

Dust Properties in the Local Interstellar Medium

Ulysses measurements yield reliable in-situdetection of large dust particles which stem from the interstellar medium (ISM) and which are not observed in interstellar extinction data. Both current models of large grains in the ISM: core-mantle grains as well as composite grains, are in agreement with dust properties implied by the Ulysses results. However, the size of particles detected by Ulysses still exceeds the size of the large grains that are predicted for the ISM. This revised version was published online in August 2006 with corrections to the Cover Date.     

Atmospheric Science with InSight

In November 2018, for the first time a dedicated geophysical station, the InSight lander, will be deployed on the surface of Mars. Along with the two main geophysical packages, the Seismic Experiment for Interior Structure (SEIS) and the Heat-Flow and Physical Properties Package (HP³), the InSight lander holds a highly sensitive pressure sensor (PS) and the Temperature and Winds for InSight (TWINS) instrument, both of which (along with the InSight FluxGate (IFG) Magnetometer) form the Auxiliary Sensor Payload Suite (APSS). Associated with the RADiometer (RAD) instrument which will measure the surface brightness temperature, and the Instrument Deployment Camera (IDC) which will be used to quantify atmospheric opacity, this will make InSight capable to act as a meteorological station at the surface of Mars. While probing the internal structure of Mars is the primary scientific goal of the mission, atmospheric science remains a key science objective for InSight. InSight has the potential to provide a more continuous and higher-frequency record of pressure, air temperature and winds at the surface of Mars than previous in situ missions. In the paper, key results from multiscale meteorological modeling, from Global Climate Models to Large-Eddy Simulations, are described as a reference for future studies based on the InSight measurements during operations. We summarize the capabilities of InSight for atmospheric observations, from profiling during Entry, Descent and Landing to surface measurements (pressure, temperature, winds, angular momentum), and the plans for how InSight’s sensors will be used during operations, as well as possible synergies with orbital observations. In a dedicated section, we describe the seismic impact of atmospheric phenomena (from the point of view of both “noise” to be decorrelated from the seismic signal and “signal” to provide information on atmospheric processes). We discuss in this framework Planetary Boundary Layer turbulence, with a focus on convective vortices and dust devils, gravity waves (with idealized modeling), and large-scale circulations. Our paper also presents possible new, exploratory, studies with the InSight instrumentation: surface layer scaling and exploration of the Monin-Obukhov model, aeolian surface changes and saltation / lifing studies, and monitoring of secular pressure changes. The InSight mission will be instrumental in broadening the knowledge of the Martian atmosphere, with a unique set of measurements from the surface of Mars.     

Inversion of Meteor Rayleigh Waves on Earth and Modeling of Air Coupled Rayleigh Waves on Mars

Meteor impacts and/or meteor events generate body and surface seismic waves on the surface of a planet. When meteoroids burst in the atmosphere, they generate shock waves that subsequently convert into acoustic waves in the atmosphere and seismic waves in the ground. This effect can be modeled as the amplitude of Rayleigh and other Spheroidal modes excitation, due to atmospheric/ground coupling effects.First, an inversion of the seismic source of Chelyabinsk superbolide is performed. We develop an approach in order to model a line source in the atmosphere, corresponding to the consecutive generation of shock waves by the interaction with the atmosphere. The model is based on the known trajectory. We calculate the synthetic seismograms of Rayleigh waves associated with the event by the summation of normal modes of a model of the solid part and the atmosphere of the planet. Through an inversion technique based on singular value decomposition, we perform a full Rayleigh wave inversion and we provide solutions for the moment magnitude.SEIS will likely detect seismic waves generated by impacts and the later might be further located by remote sensing differential processing. In the case of Mars, we use the same method to obtain waveforms associated with impacts on the planetary surface or in low altitudes in the Martian atmosphere. We show that the contribution of the fundamental spheroidal solid mode is dominating the waveforms, compared to that of the first two overtones. We perform an amplitude comparison and we show that small impactors (diameter of 0.5 to 2 m), can be detected by the SEIS VBB seismometer of InSight mission, even in short epicentral distances, in the higher frequencies of the Rayleigh waves. We perform an analysis based on impact rate estimations and we calculate the number of detectable events of 1 meter diameter meteor impacts to be 6.7 to 13.4 per 1 Martian year for a \(Q=500\).     

A Pre-Landing Assessment of Regolith Properties at the InSight Landing Site

This article discusses relevant physical properties of the regolith at the Mars InSight landing site as understood prior to landing of the spacecraft. InSight will land in the northern lowland plains of Mars, close to the equator, where the regolith is estimated to be \(\geq3\mbox{--}5~\mbox{m}\) thick. These investigations of physical properties have relied on data collected from Mars orbital measurements, previously collected lander and rover data, results of studies of data and samples from Apollo lunar missions, laboratory measurements on regolith simulants, and theoretical studies. The investigations include changes in properties with depth and temperature. Mechanical properties investigated include density, grain-size distribution, cohesion, and angle of internal friction. Thermophysical properties include thermal inertia, surface emissivity and albedo, thermal conductivity and diffusivity, and specific heat. Regolith elastic properties not only include parameters that control seismic wave velocities in the immediate vicinity of the Insight lander but also coupling of the lander and other potential noise sources to the InSight broadband seismometer. The related properties include Poisson’s ratio, P- and S-wave velocities, Young’s modulus, and seismic attenuation. Finally, mass diffusivity was investigated to estimate gas movements in the regolith driven by atmospheric pressure changes. Physical properties presented here are all to some degree speculative. However, they form a basis for interpretation of the early data to be returned from the InSight mission.