UVCS/SOHO Observations of Spectral Line Profiles in Polar Coronal Holes

Ultraviolet emission line profiles have been measured on 15-29 September 1997 for H I 1216 Å, O VI 1032, 1037 Å and Mg X 625 Å in a polar coronal hole, at heliographic heights ? (in solar radii) between 1.34 and 2.0. Observations of H I 1216 Å and the O VI doublet from January 1997 for ? = 1.5 to 3.0 are provided for comparison. Mg X 625 Å is observed to have a narrow component at ? = 1.34 which accounts for only a small fraction of the observed spectral radiance, and a broad component that exists at all observed heights. The widths of O VI broad components are only slightly larger than those for H I at ? = 1.34, but are significantly larger at ? = 1.5 and much larger for ? > 1.75. In contrast, the Mg X values are less than those of H I up to 1.75 and then increase rapidly up to at least ? = 2.0, but never reach the values of O VI.     

UVCS/SOHO Observations of H I Lyman Alpha Line Profiles in Coronal Holes at Heliocentric Heights Above 3.0 R⊙

The Ultraviolet Coronagraph Spectrometer (UVCS) on the Solar and Heliospheric Observatory (SOHO) has been used to measure spectral line profiles for H I Lyα in the south polar coronal hole at projected heliocentric heights from 3.5 to 6.0 R_⊙ during 1998 January 5–11. Observations from 1.5 to 2.5 R_⊙ were made for comparison. The H I Lyα profile is the only one observable with UVCS above 3.5 R_⊙ in coronal holes. Within this region the outflowing coronal plasma becomes nearly collisionless and the ionization balance is believed to become frozen. In this paper, the 1/e half widths of the coronal velocity distributions are provided for the observed heights. The velocity distributions include all motions contributing to the velocities along the line of sight (LOS). The observations have been corrected for instrumental effects and interplanetary H I Lyα. The half widths were found to increase with projected heliographic height from 1.5 to 2.5 R_⊙ and decrease with height from 3.5 to 5 R_⊙. This revised version was published online in June 2006 with corrections to the Cover Date.     

Mature systems for small satellite missions

Over the past several years Satellites International has developed an integrated suite of satellite sub-systems and small satellite buses. The sub-systems include S-band communications, attitude sensing and control, power conversion and distribution, and on-board data handling. They are inherently modular and readily adaptable to different satellite configurations, a concept known as semi-standardisation. This concept has been adopted by two generic low-cost buses: MicroSIL for satellites in the mass range 40–80kg; and MiniSIL for satellites in the range 100–500kg. Their architecture is based on the semi-standard sub-systems, but easily modified to utilise sub-systems from other manufacturers. They can support all stabilisation methods including spinning, 3-axis control and gravity gradient and are adaptable to a wide variety of missions including Earth resources, scientific, communications and technology demonstration. The Company also manufactures a range of low cost ground support equipment and complete ground stations to complement the space-borne systems.     

Constant gain tracker with variable frame time

A three-parameter constant-gain recursive filter is augmented by a residual-dependent frame time algorithm that automatically increases sampling rates when a target maneuvers. Computer simulations show that tracking performance is essentially independent of the particular target trajectory. It is found that radial distance errors remain effectively constant over different trajectories. It is the number of observations dictated by the adaptive frame time algorithm that is trajectory-dependent. The filter equations along with the frame time adjustment algorithm are first described, and a comparison made with a similar procedure. Examples given use the nonlinear observations generated by a passive sensor system     

Computer Simulation of Synthetic Aperture Radar Images of Three-Dimensional Objects

A digital simulation of coherent synthetic aperture radar (SAR) images of three-dimensional objects is described. The simulation is intended to produce representative SAR images that would be suitable for image analysis and pattern recognition studies. The procedure involves a modeling of the object using a combination of three-dimensional quadratic shapes yielding a smooth surface representation. The radar images of these models are then computed using physical optics scattering theory. Finite resolution both in range and cross-range direction is incorporated via a theoretical analysis which results in a simple Fourier transform representation of an equivalent "offset" window filter. Examples of the computer simulation for both infinite resolution and blurred or finite resolution are given for a KC-135 aircraft model.     

Toward optimizing lighting as a countermeasure to sleep and circadian disruption in space flight

Light is being used as a pre-launch countermeasure to circadian and sleep disruption in astronauts. The effect of light on the circadian system is readily monitored by measurement of plasma melatonin. Our group has established an action spectrum for human melatonin regulation and determined the region of 446-477 nm to be the most potent for suppressing plasma melatonin. The aim of this study was to compare the efficacy of 460 and 555 nm for suppressing melatonin using a within-subjects design. Subjects (N=12) were exposed to equal photon densities (7.18 x 10(12) photons/cm2/s) at 460 and 555 nm. Melatonin suppression was significantly stronger at 460 nm (p<0.02). An extension to the action spectrum showed that 420 nm light at 16 and 32 microW/cm2 significantly suppressed melatonin (p<0.04 and p<0.002). These studies will help optimize lighting countermeasures to circadian and sleep disruption during spaceflight.     

Properties of Coronal Hole/Streamer Boundaries and Adjacent Regions as Observed by Spartan 201

The Spartan 201 flights from 1993 to 1995 provided us with observations in H I Lyman-α of several coronal hole/streamer boundaries and adjacent streamers during the declining phase of the current solar cycle: Analysis of the latitudinal dependence of the line intensities clearly shows that there is a boundary region at the coronal hole/streamer interface where the H I Lyman-α intensity reaches a minimum value. Similar results are also found in UVCS/SOHO observations. We also discuss differences in the coronal hole/streamer boundaries for different types of streamers and their changes over the three year period of Spartan 201 observations. This revised version was published online in June 2006 with corrections to the Cover Date.     

First results from UVCS/SOHO

We present here the first results obtained by the Ultraviolet Coronagraph Spectrometer (UVCS) operating on board the SOHO satellite. The UVCS started to observe the extended corona at the end of January 1996; it routinely obtains coronal spectra in the 1145 Å – 1287 Å, 984 Å – 1080 Å ranges, and intensity data in the visible continuum. Through the composition of slit images it also produces monocromatic images of the extended corona. The performance of the instrument is excellent and the data obtained up to now are of great interest. We briefly describe preliminary results concerning polar coronal holes, streamers and a coronal mass ejection, in particular: the very large r.m.s. velocities of ions in polar holes (hundreds km/sec for OVI and MgX); the puzzling difference between the HI Ly- image and that in the OVI resonance doublet, for most streamers; the different signatures of the core and external layers of the streamers in the width of the ion lines and in the OVI doublet ratio, indicating larger line-of-sight (l.o.s.) and outflow velocities in the latter.     

The James Webb Space Telescope

The James Webb Space Telescope (JWST) is a large (6.6 m), cold (<50 K), infrared (IR)-optimized space observatory that will be launched early in the next decade into orbit around the second Earth–Sun Lagrange point. The observatory will have four instruments: a near-IR camera, a near-IR multiobject spectrograph, and a tunable filter imager will cover the wavelength range, 0.6 < ; < 5.0 μ m, while the mid-IR instrument will do both imaging and spectroscopy from 5.0 < ; < 29 μ m.The JWST science goals are divided into four themes. The key objective of The End of the Dark Ages: First Light and Reionization theme is to identify the first luminous sources to form and to determine the ionization history of the early universe. The key objective of The Assembly of Galaxies theme is to determine how galaxies and the dark matter, gas, stars, metals, morphological structures, and active nuclei within them evolved from the epoch of reionization to the present day. The key objective of The Birth of Stars and Protoplanetary Systems theme is to unravel the birth and early evolution of stars, from infall on to dust-enshrouded protostars to the genesis of planetary systems. The key objective of the Planetary Systems and the Origins of Life theme is to determine the physical and chemical properties of planetary systems including our own, and investigate the potential for the origins of life in those systems. Within these themes and objectives, we have derived representative astronomical observations.To enable these observations, JWST consists of a telescope, an instrument package, a spacecraft, and a sunshield. The telescope consists of 18 beryllium segments, some of which are deployed. The segments will be brought into optical alignment on-orbit through a process of periodic wavefront sensing and control. The instrument package contains the four science instruments and a fine guidance sensor. The spacecraft provides pointing, orbit maintenance, and communications. The sunshield provides passive thermal control. The JWST operations plan is based on that used for previous space observatories, and the majority of JWST observing time will be allocated to the international astronomical community through annual peer-reviewed proposal opportunities.