用于高压动态校准的快开阀装置

介绍一种高压快开阀装置。它可产生３７０ＭＰａ上升时间小于２０μｓ的阶跃压力，用于对高压传感器进行动态校准。     

Role of BIT in support system maintenance and availability

The role of built in test (BIT) in electronic systems has grown in prominence with the advances in system complexity and concern over maintenance lifecycle costs of large systems. In an environment where standards drive system designs (and provide an avenue for focused advancement in technology), standards for BIT are very much in an evolutionary state. The reasons for advancing the effectiveness of BIT include reduced support overhead, greater, confidence in operation, and increased system availability. The cost of supporting military electronic systems (avionics, communications, and weapons systems) has driven much of the development in BIT technology. But what about the systems that support these end items that contain test and measurement instrumentation - such as automatic test equipment (ATE), simulators and avionics development suites? There has also been a beneficial effect on the maintenance and availability of these systems due to the infusion of BIT into their component assemblies. But the effect has been much more sporadic and fragmented. This paper looks at the state of BIT in test and measurement instruments, explain its affect on system readiness, and present ideas on how to improve BIT technologies and standards. This will not provide definitive answers to BIT development questions, since the factors that affect it are specific to the instrument itself. The topics covered in this paper are: definitions of built-in test, instrument BIT history, importance of BIT fault coverage and isolation in support systems, overview of BIT development process issues that limit the effectiveness of BIT Standards related to instrument BIT, making BIT more effective in support system maintenance and availability and conclusions.     

离心铸造Al—20wt%Si合金自生表面复合材料的组织与性能

采用热模金属型离心铸造Al－20wt％Si合金，获得了外层聚集粗大初晶Si、中层为共晶组织、内层聚集细小初晶Si的自生三层表面复合材料。考察了复合材料的组织形貌，检测了复合材料的硬度和耐性，分析了复合材料的断裂模式。     

Appearance of neutron stars in the state of subsonic propeller

The state of subsonic propeller is intermediate between the states of supersonic propeller and accretor in the evolutionary tracks of magnetized compact stars. The rotational rate of a star at this stage decelerates due to the interaction between its magnetosphere and the surrounding hot, quasi-static plasma envelope. The magnetospheric radius is smaller than the corotation radius and the boundary of the magnetosphere is stable with respect to interchange instabilities. The rate of the mass flux from the inner radius of the envelope to the stellar surface is limited by the rate of plasma diffusion into the magnetic field of the star. As a result, the subsonic propeller would appear as a low-luminosity accretion-powered pulsar with a soft X-ray spectrum.     

球形铝粉的凝聚／燃烧特性

球形与非球形铝粉的表面分析表明,前者表面层比后者均匀;试验表明球形铝粉比非球形铝粉抗凝聚能力好,化学反应能力较差.因此球形铝粉在推进剂燃面形成的凝滴较小,凝滴燃烧速度较慢.这些特性对球形铝粉的合理使用具有指导意义.     

振动对空间光通信系统误码率影响的分析

在空间光通信系统中，由于卫星平台的振动，使得光发射机发生振动，从而对通信系统的误码率产生影响，本文针对光射光束为高斯光束时，振动对误码率的影响问题进行研究。结果表明，在振动时不仅振幅影响着误码率，而且波长也对误码率有影响，但通信距离对误码率的影响不大，一般可以忽略。     

平板弯曲问题的误差估计和网格自适应研究

本文对承受横向载荷的复合板设计了一个自动的误差估计和网络加密过程，并通过实际算例验证了此过程的有效性，结果证明所设计的过程能达到较高的计算精度。     

加扰流环双组元LAE的流场数值仿真

采用交错网格系统SIMPLE算法和二维两相流场燃烧模型，对有不同形状(矩形、圆弧三角形及其混合结构)和位置扰流环的某双组元液体远地点发动机(LAE)流场进行了数值仿真计算。结果表明，扰流环对提高燃烧效率作用明显。环的位置应适中(不能过于靠近头部和喷管出口处)，其高度越大，燃烧效率越高。另外，矩形环的压力损失大于三角形环。     

非线性系统的高阶线性化方法及其在二阶摄动制导中的应用

本文讨论了非线性系统相对于标称轨道的高阶线性化方法。文中在一阶线性展开的基础上,提出了高阶误差项的补偿方法,导出了计算二阶补偿项系数的线性方程组,并给出了补偿项的计算公式。然后,采用所得方法研究了飞行器的二阶摄动制导方法。     

画幅式层析成像光谱系统设计和实验研究

文章介绍一种无需时间或空间扫描的新型成像光谱仪—利用位相光栅作为分束器件的计算层析成像光谱仪 (CTIS)。重点介绍了各个系统的设计原则和位相光栅的设计 ,并给出了光栅的设计结果。详细介绍系统矩阵的实验定标方法和过程。叙述了自然光照明条件下真实物体组成的靶标的光谱成像实验 ,对目标实验采样的数据进行重构处理 ,给出了实验结果。