水洞动态测力和流动显示一体化实验技术

研制能够用于低速水流中的三分量内式测力天平,结合氢气泡(或染色液)方法,在水洞(槽)中实现测力和流动显示实验同步进行的动态实验系统,克服了通常测力和流动显示分别在风洞和水洞中进行,实验条件不同给结果分析带来的困难。天平采用高精度位移传感器,避开传统的应变片技术应用于水中所遇到的技术困难。简易飞行器模型的静态和等速俯仰实验结果表明了测量系统的可靠性。     

A new dynamic pushback control method for reducing fuel-burn costs: Using predicted taxi-out time

Long departure-taxi-out time leads to significant airport surface congestion, fuel-burn costs, and excessive emissions of greenhouse gases. To reduce these undesirable effects, a Predicted taxi-out time-based Dynamic Pushback Control(PDPC) method is proposed. The implementation of this method requires two steps: first, the taxi-out times for aircraft are predicted by the leastsquares support-vector regression approach of which the parameters are optimized by an introduced improved Firefly algorithm. Then, a dynamic pushback control model equipped with a linear gate-hold penalty function is built, along with a proposed iterative taxiway queue-threshold optimization algorithm for solving the model. A case study with data obtained from Beijing International airport(PEK) is presented. The taxi-out time prediction model achieves predictive accuracy within 3 min and 5 min by 84.71% and 95.66%, respectively. The results of the proposed pushback method show that total operation cost and fuel-burn cost achieve a 14.0% and 21.1%reduction, respectively, as compared to the traditional K-control policy.(3) From the perspective of implementation, using PDPC policy can significantly reduce the queue length in taxiway and taxi-out time. The total operation cost and fuel-burn cost can be curtailed by 37.2% and 52.1%,respectively, as compared to the non-enforcement of any pushback control mechanism. These results show that the proposed pushback control model can reduce fuel-burn costs and airport surface congestion effectively.     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.     

星载激光测高地面数据处理设计研究

星载激光测高技术是对地观测系统中最为核心和前沿的信息获取技术之一,因其具有探测方向性好、测距精度高等特点,在地球科学领域中体现出了巨大的应用潜力。在ICESat/GLAS测高地面数据处理系统的基础上,针对将于今年发射的高分七号卫星的载荷特点,设计了一套星载激光测高地面数据处理系统软件。该软件可实现对星载激光测高数据的地面处理并生成3级数据产品,包含激光能量计算、波形分解和激光脚点定位等,以及相应各级产品的数据质量控制处理。利用高分七号仿真数据对该软件进行相应的性能测试,测试结果表明:该系统软件基本满足需求,已初步具备星载激光测高地面数据处理能力。     

高温存储对Sn-Pb-Ni凸点界面金属间化合物生长的影响

倒装焊工艺由于具有信号处理速度快、封装密度高、可靠性高等特点,已广泛应用于高密度集成电路封装工艺中。高可靠倒装焊器件的互连焊点通常采用10Sn90Pb等高铅焊料,该焊料具有剪切强度高、可靠性高等优点,但其熔点高、回流工艺窗口窄等特性给封装工艺带来一定难度,此外该焊料在高温存储环境的可靠性有待进一步提高。本文采用Ni元素对10Sn90Pb焊料进行改性,研究高温存储下Sn-Pb-Ni体系凸点的力学性能以及金属间化合物（Intermetallic compound,IMC）的生长演变规律,以此评估Ni元素对10Sn90Pb凸点可靠性的影响。主要结果如下：适量添加Ni元素可以细化10Sn90Pb焊点界面处IMC晶粒,降低高温存储条件下的IMC生长速度,但在一定程度上会降低凸点的剪切强度。0.05%~0.1%含量的Ni元素添加对10Sn90Pb凸点综合性能提升较为显著。     

抑波槽宽度对水陆两栖飞机喷溅性能影响对比试验研究

抑波槽宽度合理性直接影响抑制喷溅的效果。通过两个抑波槽宽度的单船身模型拖曳水池对比试验,比较同一状态两者喷溅包络线,分析抑波槽宽度变化对飞机喷溅性能影响,表明减小抑波槽宽度使螺旋桨处喷溅高度增加19%以上,使襟翼处喷溅高度降低54%。     

基于镦头不均匀变形的压铆力建模

压铆力是影响铆接质量的重要参数,其数值的确定主要依赖于经验或简化的理论模型,且不考虑镦头鼓形部分的影响,因而误差较大。依据铆钉材料在压铆过程中的流动趋势,将压铆过程划分为4个阶段,并确定了最大压铆力出现的位置。基于厚壁筒受压进入塑性状态的极限应力分析,建立了镦头不均匀变形的压铆力计算模型,结合体积不变假设得到了镦头圆环部分尺寸,用于压铆力的求解。最后以直径4 mm和5 mm的平锥头铆钉压铆为例,利用ABAQUS软件和G86型钻铆机分别进行数值模拟与压铆实验,对相同压铆力作用下的镦头尺寸进行对比。结果表明,模拟和实验得到的镦头尺寸与理论相比,差别均小于5%,表明该压铆力计算模型具有有效性。     

负压式平板型环路热管试验

为解决高热流密度电子器件的散热问题,设计了一套负压式铜 甲醇环路热管,其蒸发器设计成平板型。研究表明,该平板型环路热管具有较高的散热能力,能够在无重力姿态和重力姿态下顺利启动。当重力倾角分别为0°、18°和30°,热负荷为160W时,蒸发器壁面温度分别达到85.8℃、66.3℃和64.6℃。按照环路热管启动状态,其启动过程可分为3个阶段：加热阶段、预启动阶段和后启动阶段。在低热负荷区域,环路热管会出现温度波动现象。增大重力倾角,有利于降低蒸发器壁面温度和热阻。当重力倾角为30°,热负荷从10W递增到160W时,环路热管的热阻从4.97℃/W降低到0.39℃/W。     

基于FMECA信息的测试性验证试验样本分配方法

针对目前国内外测试性验证试验中普遍采用的基于故障率的分层抽样方法考虑因素单一,可能导致样本分配不尽合理,而现有考虑多因素的样本分配方法代表性不足,难以实现工程上的应用的问题,对影响样本分配的因素与故障模式影响及危害性分析(FMECA)信息的关系进行了详细分析,提出了基于FMECA信息的样本分配方法。首先定义了单元影响系数和影响因子向量,提出了向量各元素赋值规则,解决了影响因素选取的问题;其次通过基于逼近理想解排序法(TOPSIS)优化的层次分析法确定了权值矩阵,实现了样本分配。最后通过实例验证表明该方法考虑因素全面,运用灵活,更具代表性和工程应用价值。