Deorbiter CubeSat mission design

This paper presents the mission design for a CubeSat-based active debris removal approach intended for transferring sizable debris objects from low-Earth orbit to a deorbit altitude of 100 km. The mission consists of a mothership spacecraft that carries and deploys several debris-removing nanosatellites, called Deorbiter CubeSats. Each Deorbiter is designed based on the utilization of an eight-unit CubeSat form factor and commercially-available components with significant flight heritage. The mothership spacecraft delivers Deorbiter CubeSats to the vicinity of a predetermined target debris, through performing a long-range rendezvous maneuver. Through a formation flying maneuver, the mothership then performs in-situ measurements of debris shape and orbital state. Upon release from the mothership, each Deorbiter CubeSat proceeds to performing a rendezvous and attachment maneuver with a debris object. Once attached to the debris, the CubeSat performs a detumbling maneuver, by which the residual angular momentum of the CubeSat-debris system is dumped using Deorbiter’s onboard reaction wheels. After stabilizing the attitude motion of the combined Deorbiter-debris system, the CubeSat proceeds to performing a deorbiting maneuver, i.e., reducing system’s altitude so much so that the bodies disintegrate and burn up due to atmospheric drag, typically at around 100 km above the Earth surface. The attitude and orbital maneuvers that are planned for the mission are described, both for the mothership and Deorbiter CubeSat. The performance of each spacecraft during their operations is investigated, using the actual performance specifications of the onboard components. The viability of the proposed debris removal approach is discussed in light of the results.     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

Investigation of the role of aziridine bonding agents on the aging of the composite solid rocket propellant(CSRP)

The role of bonding agents on the aging characteristics is one of the important research topics.Aging program of the prepared propellant samples was conducting as follows:Five samples,two free of bonding agents,and three containing an aziridine based bonding agents(MAPO,HX-752,MAT4),four samples based on different bonding and curing agents all were aged at 70 ℃.The prepared bonding agent "MAT4" gave remarkable improvements and resulted in highly stable mechanical properties comparing with HX-752 or MAPO.The selected bonding agents family inhibited the rate of decomposition of the propellants during the aging periods and supported the propellant matrix against decomposition at the elevated temperatures.      

Systematic examination of the geomagnetic storm sudden commencement using multi resolution analysis

Geomagnetic storm sudden commencements (SSC) contain a wealth of information which is useful in many applications. It is important to point out that the SSCs used in this study are sampled at the rate of one sample per second in order get use of such high resolution data. In this paper, two studies are made on the geomagnetic SSC and an SSC onset automatic detection algorithm is introduced. The first study is about finding the relationship between the SSC rise time and its amplitude. Where it is found that there is a positive correlation between the amplitude and the amplitude gradient which is the amplitude divided by rise time. The second study is checking the spectrum of the SSC, starting from its onset until the end of the SSC rise time. This check had proved that the SSC contains both low and high frequency regions. This led us to introduce a new term, namely the SSC variation rate (VR). This VR is defined as the maximum rate of change of the field in the higher-frequency region of the SSC. These two studies were the guide to build an SSC automatic detector of one sample per second data using multi resolution analysis (MRA) of the discrete wavelet transform (DWT). The data set contains 134 SSCs with different VRs that were collected from the Circum-pan Pacific Magnetometer Network (CPMN). It is found that the standard deviation of the detection error is 41 s and that the average error is 9 s. From the calculated error distribution function, it is found that the detection error is within the range of −1.5 to 3 min. The detection process, as will be shown in the article, takes 70 s for one station and 3 min if the decision is related to the detection(s) of other stations. These results demonstrate the superiority of the proposed algorithm over other algorithms in which the detection error ranges between −8 and 5 min and the detection process takes 2–10 min. In addition to being faster and more accurate than the other algorithms, the proposed algorithm is the first algorithm that automatically detects the SSC onset times from high-resolution data unlike previous studies that focused on determining the SSC times automatically using one-minute resolution data.     

大型壁板数控钻铆的三点快速调平算法

 针对传统机翼壁板铆接过程中托架调平所存在的问题，提出一种基于有限曲面加工区域的三点调平算法。利用机翼表面上待钻铆点附近三点的坐标来表征该铆接区域的空间姿态，通过钻铆系统的几何结构模型所确定的坐标变化矩阵，逆解出调平所需的各运动副位移增量。在钻铆系统结构模型和机翼曲面方程的基础上建立三点选取的优化模型，并利用外点罚函数法确定其优化解。西安飞机工业(集团)责任有限公司ARJ21新支线飞机的机翼壁板试验件数控钻铆结果表明，该算法能够实现较高的加工精度和调平效率。     

Multidisciplinary Design and Optimization of Multistage Ground-launched Boost Phase Interceptor Using Hybrid Search Algorithm

This article proposes a multidisciplinary design and optimization (MDO) strategy for the conceptual design of a multistage ground-based interceptor (GBI) using hybrid optimization algorithm, which associates genetic algorithm (GA) as a global optimizer with sequential quadratic programming (SQP) as a local optimizer. The interceptor is comprised of a three-stage solid propulsion system for an exoatmospheric boost phase intercept (BPI). The interceptor's duty is to deliver a kinetic kill vehicle (KKV) to the optimal position in space to accomplish the mission of intercept. The modules for propulsion, aerodynamics, mass properties and flight dynamics are integrated to produce a high fidelity model of the entire vehicle. The propulsion module comprises of solid rocket motor (SRM) grain design, nozzle geometry design and performance prediction analysis. Internal ballistics and performance prediction parameters are calculated by using lumped parameter method. The design objective is to minimize the gross lift off mass (GLOM) of the interceptor under the mission constraints and performance objectives. The proposed design and optimization methodology provide designers with an efficient and powerful approach in computation during designing interceptor systems.     

Automatic detection of geomagnetic sudden commencement via time–frequency clusters

One of global processes in ionosphere–thermosphere–magnetosphere system is the geomagnetic storms. It is of great importance to develop an algorithm that auto-detects sudden commencement because it could be an indicator of onset of the geomagnetic storm. Automatic detection of geomagnetic sudden commencement is based on time–frequency clusters generated by spectrogram. Proposed algorithm is tested on data set collected from stations belong to the international real-time magnetic observatory network (INTERMAGNET). Maximum standard deviation of algorithm detection times is observed to be one minute of the corresponding arrival times published by National Geophysical Data Center (NGDC).     

GPS phase difference variation statistics: A comparison between phase scintillation index and proxy indices

Scintillated GPS phase observations are traditionally characterized by the phase scintillation index, derived from specialized GPS receivers usually tracking at 50 Hz. Geodetic quality GPS receivers, on the other hand, are normally tracking at frequencies up to 1 Hz. However, availability of continuously operating geodetic receivers both in time and geographical location are superior to scintillation receiver’s coverage in many parts of the world. This motivates scintillation studies using regional and global geodetic GPS networks. Previous studies have shown the usefulness of GPS estimated total electron content variations for detecting ionospheric irregularities. In this paper, collocated geodetic and scintillation receivers are employed to compare proxy indices derived from geodetic receivers with the phase scintillation index during quiet and moderately disturbed ionospheric conditions. Sensitivity of the phase scintillation indices at high latitude stations to geomagnetic activity is discussed. Global mapping of ionospheric disturbances using proxy indices from real-time 1 Hz GPS stations are also presented.