Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

Increased BLSS closure using mineralized human waste in plant cultivation on a neutral substrate

The purpose of this work was to study the full-scale potential use of human mineralized waste (feces and urine) as a source of mineral elements for plant cultivation in a biological life support system (BLSS). Plants that are potential candidates for a photosynthesizing link were grown on a neutral solution containing human mineralized waste. Spring wheat Triticum aestivum L., peas Pisum sativum L. Ambrosia cultivar and leaf lettuce Lactuca sativa L., Vitaminny variety, were used. The plants were grown hydroponically on expanded clay aggregates in a vegetation chamber in constant environmental conditions. During plant growth, a determined amount of human mineralized waste was added daily to the nutrient solution. The nutrient solution remained unchanged throughout the vegetation period. Estimated plant requirements for macro-elements were based on a total biological productivity of 0.04 kg day⁻¹ m⁻². As the plant requirements for potassium exceeded the potassium content of human waste, a water extract of wheat straw containing the required amount of potassium was added to the nutrient solution. The Knop’s solution was used in the control experiments.     

正电子素络合形成研究(Ⅱ)

本文讨论了不同测量条件对正电子素络合反应速度常数测定值的影响。实验结果表明,在稀溶液的条件下,使用我们特殊设计的盛装溶液的匣式容器能大大提高放射源的使用率并能完全避免放射性废水。     

免维护铅酸蓄电池滤气片制造工艺研究

免维护铅酸蓄电池用滤气片的组成，烧结工艺及疏水处理工艺对孔隙率、透气率、疏水性及耐酸性有很大影响。以Ａｌ２Ｏ３和ＳｉＯ２为主要成份的滤气片在１１００～１６００℃烧结后，经聚四氟乙烯疏水处理后用于免维护电池，能有效地阻止水份的损耗。     

跨声速压气机多圆柱孔式处理机匣设计与扩稳机理研究

基于对跨声速轴流压气机内部失稳触发机制的认识,设计了一种新型多圆柱孔式处理机匣结构。对带该处理机匣的跨声速轴流压气机转子Rotor-37的内部流动进行了全三维非定常数值模拟,结果表明该新型多圆柱孔式处理机匣结构可使压气机的综合裕度提高6.5%,而最高效率点效率仅降低0.19%。对多圆柱孔式处理机匣的扩稳机理进行了详细分析,结果表明处理机匣能有效消除低速流体团引起的通道阻塞现象,并将低速阻塞流体团抽吸进入处理机匣容腔,然后从前端喷口预旋喷出以抑制叶顶区域的流动分离,从而有效提高跨声速轴流压气机的失速裕度。     

WTO规则与增值税改革

加入世界贸易组织后 ,结合其规则来调整我国的增值税政策显得十分急迫。作者分析了现行增值税的缺陷 ,并提出了调整增值税的具体措施。     

中国空间大功率微波部件微放电抑制表面处理技术最新进展

材料表面的二次电子发射会触发和维持空间高功率射频器件的共振雪崩放电现象,这种现象又被称为微放电效应。微放电效应是限制空间大功率微波部件应用的关键问题之一。从微放电作用的机理出发,首先介绍了两种微放电类型（单表面与双表面）的基本物理机理;然后总结了当前主流的微放电抑制方法并给出各自应用于空间大功率微波部件时的限制。针对空间大功率微波部件微放电抑制的特殊问题,综述了国内近5年来在表面处理法抑制微放电领域的研究成果并预测了微放电抑制技术的发展趋势。     

提升民用飞机水废水系统运营经济性技术研究

基于现代民机绿色环保设计理念和对经济性的追求,减重是飞机设计中重点考虑因素,关于降低民用飞机水废水系统运营载重、提高运营经济性研究,国内外尚未发布公开文献。本文基于对航线用水统计数据研究,形成航线运营所需水量计算技术;基于我国航线飞行时长分布特点,提出基于航线实际运营时间和载客人数为需求、为系统设定分档加水设计技术。结果表明：与同类机型数据对比,本文的水量计算技术是有效的;分档加水设计技术能够有效地降低系统在航线运营过程中的运营重量,可以提升民用飞机水废水系统的运营经济性。     

粉末GH4169 合金中的原始颗粒边界问题

探讨了粉末GH4169高温合金中的原始颗粒边界的形成机理、其对合金组织性能的影响以及消除措施等。结果表明:粉末GH4169合金中原始颗粒边界组织主要由MC碳化物构成,而在粉末成型前进行预热处理可以有效抑制原始颗粒边界组织的生成,提高合金综合性能。     

热处理温度对硬铬镀层性能的影响

研究了热处理温度对硬铬镀层性能的影响.发现经过200～300℃1*#h热处理,镀层硬度明显提高,耐磨性得到改善,但硬度和耐磨性的最优点对应不同的热处理温度.对镀层XPS分析表明,热处理过的镀层中有有机碳化物析出.对镀层的EDAX分析表明,热处理使镀层表面氧含量增高,但对镀层微裂纹数量和宽度没有明显影响.对镀层的XRD实验结果表明,热处理后镀层的晶体结构未发生改变.