资源约束突变的航天器观测快速重调度优化算法

针对航天器对地观测调度中资源约束发生突变的情况,提出了一种基于蚁群算法的启发式重调度算法。首先对重调度过程中的资源约束进行分析,给出了资源约束发生变化的重调度模型。然后,结合原调度优化结果,给出重调度任务集合更新方法,对任务集合进行剪裁。最终,基于最大限度利用原调度方案信息的思想,结合任务集合更新及优先级等启发式信息,给出了一种改进的重调度优化算法。数值计算结果表明,所设计的算法可以快速有效的提高重调度过程的收益。     

磁场全张量测量计算方法与误差分析

矢量磁场和磁场全张量数据是多磁源反演的数据基础。针对矢量磁场和磁场全张量的测量问题,文章提出了矩阵式矢量磁场连续扫描方法。对利用矢量磁场计算磁场全张量所用的数据结构进行了研究,应用MATLAB软件对常用的十字形和六面体两种不同数据计算结构进行了仿真分析,结果表明,两种计算结构的误差相近且均不大于10%;并分析了基线距离对磁场全张量计算的影响,结果表明,磁场全张量计算误差随着基线距离的增加而增加。     

航天器技术状态基线与技术状态文件的应用探讨

技术状态基线和技术状态文件管理是航天器研制过程中技术状态管理的重要组成部分。文章总结了航天器技术状态基线和技术状态文件的分类;针对在航天器实际应用中存在的对技术状态基线和技术状态文件的理解和认识不统一问题,梳理了研制阶段与技术状态基线的对应关系,并以此为基础探讨和分析了功能、研制(分配)与生产(产品)三类基线的建立,功能技术状态文件、研制技术状态文件和生产技术状态文件的形成与组成,以及技术状态控制过程中形成的文件归类问题。结合某新研遥感卫星技术状态管理过程,进一步阐述了新研航天器开展的与技术状态基线和技术状态文件相关的工作,并具体分析了形成的文件与技术状态文件的关系。该项目的应用效果表明,各阶段技术状态基线和文件的建立、确认、清理、总结等工作,有助于提高航天器技术状态管理的规范性和有效性。     

一种航天器单脉冲差模角跟踪系统的标定及测试方法

介绍了航天器单脉冲差模角跟踪系统的组成和基本原理;针对捕获跟踪系统性能与射频通道相位特性的相关性,提出了在无线状态下通过用户目标在一定范围内按一定轨迹运动进行射频通道相位标定及跟踪性能测试的方法;在此基础上进一步提出了利用信号源模拟用户目标在角跟踪系统天线坐标系下不同位置时天线输出的射频信号,进行有线状态下射频通道性能的测试方法。标定及测试方法通过地面试验验证了可行性和有效性,可用于航天器单脉冲差模角跟踪系统在地面的通道相位标定、跟踪性能测试和射频通道性能测试,以实现角跟踪系统对用户目标高精度、稳定的跟踪。     

Effects of wing flexibility on aerodynamic performance of an aircraft model

The low-speed wind tunnel experiment is carried out on a simplified aircraft model to explore the influence of wing flexibility on the aircraft aerodynamic performance. The investigation involves the measurements of force, membrane deformation and velocity field at Reynolds number of 5.4 × 10⁴–1.1 × 10⁵. In the lift curves, two peaks are observed. The first peak, corresponding to the stall, is sensitive to the wing flexibility much more than the second peak, which nearly keeps constant. For the optimal case, in comparison with the rigid wing model, the delayed stall of nearly 5° is achieved, and the relative lift increment is about 90%. It is revealed that the lift enhanced region corresponds to the larger deformation and stronger vibration, which leads to stronger flow mixing near the flexible wing surface. Thereby, the leading-edge separation is suppressed, and the aerodynamic performance is improved significantly. Furthermore, the effects of sweep angle and Reynolds number on the aerodynamic characteristics of flexible wing are also presented.     

再入航天器表面亚波长等离子体薄层对微波信号影响效应研究

为了建立电磁波在亚波长等离子体薄层中传播的物理数学模型,并针对通信频段的电磁波,研究电磁波在再入航天器表面等离子体薄层中的透射问题,相关研究成果可为再入航天器通信“黑障”现象研究提供理论基础。模型从麦克斯韦方程组出发,采用微分薄层法进行数值求解,获得了不同等离子体密度条件下亚波长等离子体中目标电磁波的透射特性及传播规律,揭示了截止反射效应和碰撞吸收效应在其中发挥的作用。本研究对于深入了解亚波长碰撞等离子体薄层中电磁波的传播过程具有意义。     

基于观测器的平台无陀螺姿态复合控制

针对超静卫星星体平台无陀螺、载荷敏感器与星体平台执行机构非共基准安装时整星存在姿态异位控制问题,提出了一种基于观测器估计星体平台姿态的复合控制方法。首先,建立星体平台/Stewart平台/载荷的动力学模型,并获得Stewart平台作动器关节空间的等效动力学模型。针对关节空间等效模型,设计super twisting观测器,以作动器平动位移为输入,以载荷和星体平台之间的相对姿态和角速度为输出,实现星体平台姿态和角速度估计。其次,以载荷测量姿态信息为输入,设计Stewart作动器的积分滑模控制律,实现载荷高精度指向控制。以观测器估计的星体平台姿态信息为输入,设计星体平台控制器实现星体平台的稳定控制。Lyapunov稳定性分析表明所设计的观测器和控制器能够保证闭环系统渐近稳定。数学仿真结果表明：在星体平台有陀螺时,载荷能够实现0.1″指向精度;在星体平台无陀螺时,采用观测器估计星体平台姿态并进行控制,载荷亦可实现0.1″指向精度。     

Methods of spacecraft impulsive relative hovering and trajectory safety analysis

Based on the analytical solutions of T-H equations and its state transition matrix form,the open-loop control method of spacecraft impulsive relative hovering was studied,which is promising for practical engineering use.The true anomaly intervals of the hovering impulse were optimized by the nonlinear mathematical programming.Based on the calculation of collision probability,the method of safety analysis and risk management was proposed.The numerical simulations show that the introduced relative hovering method can be used for circular and elliptical reference orbits hovering.Furthermore,the local optimal solution can be obtained by applying the true anomaly intervals optimization method.The maximum collision probability and the minimum relative distance nearly appear at the same time.And,the smaller the relative distance is,the larger the collision probability.     

新型非接触式径向C4D传感器优化设计

基于电容耦合式非接触电导检测(C4D)技术,设计研发了一种新型径向结构的非接触式电导测量传感器。该传感器利用串联谐振的原理,引入电感模块以消除耦合电容对测量的不利影响,扩大了测量范围,提高了测量灵敏度。同时,用仿真与实验相结合的方法对传感器的电极张角进行了优化研究。在5.0、7.5、9.1、10.2和12.0 mm 5种不同内径的管道中进行了电导测量实验,电导测量相对误差均不超过5%,实验结果表明,所设计的新型非接触式径向C~4D电导测量传感器是可行和有效的。     

Experiment of drag characteristics of a novel variable geometry flame-holder

A novel variable geometry flame-holder (VGF) based on V-gutter was presented. The structural characteristics of the flame holder were introduced. Experimental study on drag characteristics of the VGF on un-burning and burning states was conducted in a rectangular combustion test rig. The influence of the change of gutter trailing edge width w on pressure recovery in different operating conditions was analyzed emphatically. Furthermore,drag characteristics in different trailing edge width variation modes were discussed. Results show that: (1) Narrowing w can observably raise the total pressure recovery σ but the highest σ is not obtained at minimum w. (2) The relationship of drag coefficient ψ and w in the un-burning conditions can be well expressed in a form of exponential equation (w/d>0.4). (3) Drag characteristics are not sensitive to the variation modes and speeds of w . (4) In the burning condition,σ decreases with the increasing of w basically and the course can be divided into three stages. The results and experimental data presented in this paper would enhance the phenomenological understanding of this type of VGF,and would contribute to the next experimental study and numerical calculus of this novel VGF.