XB14型精密石英谐振器的研制

XB14型精密石英谐振器是为现代通信、导航和航天飞行器工程系统及地面高稳晶振研制的一种小型晶体频率控制元件。该谐振器采用了硬玻璃扁平壳和高频感应真空封接技术,具有体积小、密封性好、无封接污染,高可靠和低老等特点,它的频率范围在5～250MHz,老化率在10~(-8)～10~(-9)/d量级。     

U型节流槽等压差活门内流场特性

以某U型节流槽等压差活门为研究对象,开展了内流场性能数值模拟研究.基于三维建模造型技术对所设计的压差活门进行初步建模,然后采用周期性网格网格单元划分等压差活门的结构化网格;进而通过CFD数值模拟进行了内流场仿真分析,并对不同出口节流开度的等压 差活门模型进行了对比研究.内流场状态表明:U型节流槽等压差活门不同流量以及不同出口节流开度下在节流口处由于面积突变,压力梯度变化较大,等压差活门的压降主要集中在此处,且均存在一定范围低速团与二次旋涡流等.仿真结果预测的外特性性能表明:等压差活门的压差在不同流量工况下和相同流量的不同出口节流开度下,压差维持在0.9MPa左右,符合设计要求.且不同出口节流开度下压差变化趋势相似,出口节流开度越大,压差越大,小流量下相应更快.      

ADS数据的处理和显示

基于航空卫星通信的飞行监视,即自动相关监视（ADS）,是航空卫星移动业务（AMSS）通信应用新领域,是建立在航空卫星通信基础上的一种新的飞行监视技术。该文介绍了基本ADS报告信息电文的组成及各部分的含义,着重阐述将所收到的ADS数据进行处理,并以直观易懂的表格及图象形式显示出来,便于确切地知道飞机的四维位置（纬度、经度、高度和时间）。     

基于虚拟样机技术的航空发动机放气活门机构仿真及故障分析

针对某型航空发动机放气活门机构主动摇臂的多起断裂故障,为寻找故障原因并尽可能缩短排故周期与降低排故成本.借助虚拟样机技术建立此机构的动力学仿真模型,利用动力学仿真软件ADAMS与有限元分析软件ANSYS的联合仿真分析,实现放气活门机构摇臂断裂故障再现,并找出断裂件受力的主要影响因素及其影响规律,估算各受力水平下断裂摇臂的疲劳寿命.最终,分别给出保证摇臂最低使用寿命与全寿命使用情况下的改进建议,即将摇臂与放气活门之间间隙B增大至0.273mm与0.279mm,从而为实际工程排故提供理论依据.      

T-1A型高精度绝对重力仪

高精度绝对重力仪用于测量地球表面的重力加速度（g,常用值9.81 m/s2）,在精密计量、大地测量、地球物理、资源勘探等领域具有广泛应用。近年来,清华大学自主研制完成T-1与T-1A型高精度绝对重力仪,采用新型的自由落体装置、激光干涉测量技术和信号处理方法,可实现微伽量级不确定度的精密重力测量。本文主要介绍T-1A型高精度绝对重力仪的系统技术和测试结果,经过进一步工程化改进,该仪器有望实际应用于重力计量、地震研究等领域。     

多核DSP实时图像处理平台设计与实现

为了实现对高帧率、高分辨率图像的智能化实时处理,要求图像处理系统具有较高的数据传输带宽和数据处理能力。采用多核DSP作为核心处理器来解决目前图像采集平台面临的数据传输瓶颈和处理瓶颈,利用FPGA硬件化并行处理的特性完成多路视频的预处理,设计了高速串口RapidIo通信接口实现视频的实时传输,对DSP的多核调度特性进行分析,保证处理的实时性,并采用相关算法验证系统的性能。     

航空研制项目技术风险评估模型研究

针对航空研制项目技术风险大的特点,从设计与分析、制造、软件开发、试验与评定和使用5个方面出发,构建了航空研制项目技术风险评估模型。该模型可作为航空研制项目转阶段决策参考的辅助工具。     

Diversity of Comets: Formation Zones and Dynamical Paths

The past dozen years have produced a new paradigm with regard to the source regions of comets in the early solar system. It is now widely recognized that the likely source of the Jupiter-family short-period comets (those with Tisserand parameters, T > 2 and periods, P, generally < 20 years) is the Kuiper belt in the ecliptic plane beyond Neptune. In contrast, the source of the Halley-type and long-period comets (those with T < 2 and P > 20 years) appears to be the Oort cloud. However, the comets in the Oort cloud almost certainly originated elsewhere, since accretion is very inefficient at such large heliocentric distances. New dynamical studies now suggest that the source of the Oort cloud comets is the entire giant planets region from Jupiter to Neptune, rather than primarily the Uranus-Neptune region, as previously thought. Some fraction of the Oort cloud population may even be asteroidal bodies formed inside the orbit of Jupiter. These comets and asteroids underwent a complex dynamical random walk among the giant planets before they were ejected to distant orbits in the Oort cloud, with possible interesting consequences for their thermal and collisional histories. Observational evidence for diversity in cometary compositions is limited, at best. This revised version was published online in June 2006 with corrections to the Cover Date.     

A shortcut to marking 3D target curves on curved surface via a galvanometric laser scanner

Marking arbitrary three-dimensional(3D) target curves on given objects with curved surface is required in many industrial fields, such as fabric prepreg placement in composite material part fabrication, product assembly, surface painting for decoration, etc. A shortcut to the solution of this intractable problem is proposed by utilizing a galvanometric laser scanner(GLS) with the aid of a camera. Without using the existing tedious GLS calibration procedures,the proposed method directly establishes a mapping between the 3D coordinates of the laser spots on the object surface and the control voltages of the scanner. A single-hidden layer feedforward neural network(SLFN) is employed to model the mapping. By projecting a dense grid of laser spots on the object to be marked and simultaneously taking only one image, the SLFN model is trained in minutes via a linear solving mechanism. Experiments demonstrate that the trained SLFN model has a good generalization performance for marking 3D target curves. The 3D laser marking errors on experimental objects are less than 0.5 mm. The proposed method is especially suitable for on-site use and can be conveniently extended to multiple GLSs for marking large complex objects.     

喷嘴挡板式电液伺服阀制造技术创新研究

喷嘴挡板式电液伺服阀是液压系统实现控制功能的常用元件,本文通过在某型号伺服阀产品工艺流程、关键零组件/工序工艺方法、工艺文件等方面进行超出传统方式的改进和试验,完成了其制造技术的创新性实践研究,优化了该类电液伺服阀生产模式,提升了生产效率和能力.