涡扇发动机引射喷管的红外辐射特性数值研究

红外隐身技术对提高未来战机战场生存力具有重要意义,发动机排气系统是飞机后半球的主要红外辐射源。为了研究涡扇发动机引射喷管的红外辐射特性,结合引射喷管的CFD计算,采用离散传递法计算红外辐射强度,研究了普通引射喷管以及带5°下倾角的引射喷管后半球3～5μm以及8～14μm波段的红外辐射强度空间分布规律,并与相似尺寸的涡扇/涡喷发动机收缩喷管进行比较。结果表明：在探测角度较大时,涡扇发动机引射喷管的红外辐射强度较收缩喷管小20%左右;引射喷管结构上的非对称性导致红外辐射强度角向分布也呈现非对称性特征;8～14μm波段与3～5μm波段的红外辐射空间分布规律基本相同,但辐射能量小40%左右。     

Cytogenetic examination of cosmonauts for space radiation exposure estimation

Purpose

To evaluate radiation induced chromosome aberration frequency in peripheral blood lymphocytes of cosmonauts who participated in flights on Mir Orbital Station and ISS (International Space Station).

Materials and methods

Cytogenetic examination which has been performed in the period 1992–2008 included the analysis of chromosome aberrations using conventional Giemsa staining method in 202 blood samples from 48 cosmonauts who participated in flights on Mir Orbital Station and ISS.

Results

Space flights led to an increase of chromosome aberration frequency. Frequency of dicentrics plus centric rings (Dic+Rc) depend on the space flight duration and accumulated dose value. After the change of space stations (from Mir Orbital Station to ISS) the radiation load of cosmonauts based on data of cytogenetic examination decreased. Extravehicular activity also adds to chromosome aberration frequency in cosmonauts’ blood lymphocytes. Average doses after the first flight, estimated by the frequency of Dic+Rc, were 227 and 113 mGy Eq for long-term flights (LTF) and 107 and 53 mGy Eq for short-term flights (STF).

Conclusion

Cytogenetic examination of cosmonauts can be applied to assess equivalent doses.     

卫星在轨太阳辐射热流的简化计算方法

针对卫星在轨太阳辐射热流计算过程中计算参数多,计算过程复杂的问题,提出了一种简化的计算方法。该方法在分析卫星、地球和太阳三者之间空间几何关系的基础上,建立了新的计算坐标系,在计算坐标系中对卫星、地球和太阳的位置进行了重新规定,并在此坐标系中推导了卫星太阳辐射热流的计算公式。运用此方法对卫星太阳辐射热流进行分析求解时,轨道参数之间的空间角度关系更为简单,仅需对7个主要参数进行计算,与传统方法相比较计算量减少了约2/3。     

Infrared radiation simulation of exhaust system by coupling FVM with narrow band k-distribution

A three-dimensional infrared radiation code for exhaust system was developed by the finite volume method coupled with narrow band k-distribution in non-gray absorbing-emitting media. The final infrared signature had considered the atmosphere effect, and the simulation values were favorably consistent with testing ones. The results indicate that the relative errors considering the effect of atmosphere compared with that of the contrary condition reduce by 31%, it shows that when simulating the infrared radiation of the target which is received by the infrared detectors, even the calculation band is in atmospheric windows 3~5 μm, the effect of atmospheric transmission on infrared signature of the target should not be neglected.      

基于ProE的航天器三维屏蔽与辐射剂量评估方法研究

为准确评估结构异常复杂的航天器内部遭遇的辐射剂量,本文将直线近似原理和ProE工程软件相结合,自主开发了一种新型的航天器三维屏蔽与辐射剂量评估方法。利用本方法对立方体、球、平板等简单几何体内部的屏蔽厚度和辐射剂量进行了分析计算,计算结果表明基于ProE的三维屏蔽与辐射剂量计算方法是可靠的。结构复杂程度相当于中等规模航天器的模型计算结果表明,本方法能够较高效的分析评估复杂航天器内部遭遇的屏蔽厚度和辐射剂量。
     

Removing Solar Radiation Based on the Empirical Mode Decomposition Method for Seismo-Ionospheric Anomaly Before the M9.0 Tohoku Earthquake

The ionospheric effect from solar activity can be seen as the background in the process of detecting the ionospheric precursor prior to strong earthquakes. The ionospheric variation induced by the forthcoming earthquake can be covered by the strong solar background during the period of high solar activity. The issue of how to remove the ionospheric effect from solar radiation is of outstanding significance. In this paper, a method of Empirical Mode Decomposition (EMD) is used to eliminate the solar background. As a case study, the global ionospheric map TEC before the M9.0 Tohoku earthquake on 11 March 2011 is analyzed. After the effect of solar radiation is removed using the EMD method, the precursor of the imminent earthquake is more obvious. The ionospheric anomaly had a local character and only appeared close to the earthquake epicenter while the useful signals were covered by the solar radiation background with traditional method, which implies that the EMD method is effective in eliminating solar radiation background.      

一种串并转换器件单粒子效应试验研究

针对型号用新型器件抗辐射能力评估的需要,研制了串并转换器件单粒子效应检测系统,并对卫星型号中准备使用的一款26位串并转换器件进行了单粒子效应评估试验,得到了器件抗单粒子锁定的阈值,并发现该器件在单粒子辐照下会出现连续位输出错误。结合器件版图、结构分析了单粒子效应造成连续位错误的原因,为器件厂家后续设计改进和卫星型号进行系统级抗辐射加固设计提供了依据。     

空间碎片的温度特性分析

对空间碎片温度特性的分析,是利用红外传感器探测空间碎片的基础,也是研究航天器在轨安全的重要内容。文章对空间碎片接收不同辐射进行全面分析,研究其在轨运行情况,建立热平衡方程,完成对不同时刻其温度变化的计算,并绘制出温度变化曲线。结果表明空间碎片在轨道上不同位置有不同的红外辐射特性。该研究对利用天基空间探测器进行空间碎片的检测、识别,以及航天器的规避有参考意义。     

高能X射线辐照材料的SPH数值模拟

高能脉冲X射线辐照材料时,能量沉积会使材料表层发生气化,并在材料内部形成高压热击波。目前一般采用差分方法对高压热击波过程进行数值模拟。文章尝试采用光滑粒子流体动力学（SPH）方法对X射线辐照材料进行数值模拟,由于材料表层的气化膨胀所致,膨胀后的粒子体积是原来的几十倍甚至上百倍,产生粒子大变形的粒子穿透现象;分析了产生粒子穿透现象的主要原因是气化边界处密度计算公式不合适所致,为此对密度计算公式进行了改进,并开展了基于改进密度计算公式的两种方法的数值模拟,两种方法的计算结果比较一致。     

一种解决经验模态分解端点效应的边界延拓法

用于电子设备或系统辐射发射趋势预测的数据大多呈现非线性、样本量小的特点,这大大增加了预测建模的难度,而经验模态分解(EMD)可以将非线性、非平稳的数据分解成若干个呈现一定周期性的本征模态函数(IMF),并且EMD具有完备性和正交性,可通过分别对分解得到的IMF分量建模,从而完成对原始数据的建模。但EMD被端点效应问题所困扰,为了提高EMD的分解精度,针对分解过程中的端点效应问题,以及辐射发射趋势预测的时间序列数据样本量小的特点,利用建立灰色均值GM(1,1)预测模型所需数据量小的优点,提出了一种基于灰色均值GM(1,1)预测模型的边界延拓方法,在原始数据两端各拓展一个极大值和一个极小值,对原始数据进行边界延拓,从而抑制EMD的端点效应。仿真对比结果表明:该方法在分解层数和平均相对误差方面均优于未经延拓处理的EMD,且对数据样本量要求不高。