一种线运动扰动环境下基于惯性凝固系抗干扰自对准优化算法研究

传统惯性凝固性对准技术可有效隔离角运动干扰环境对捷联惯导自对准精度的影响,但对线运动环境下的抗干扰能力不足.据此,在深入分析线运动干扰对捷联惯导惯性凝固系下自对准精度影响途径之上,对线运动干扰环境划分为速度周期波动、突跳以及速度短期线性漂移.提出采用积分降噪、载体惯性系速度递推拟合与基于带遗忘因子递推最小二乘的速度慢漂提取技术相结合的抗干扰自对准优化算法,并进行了试验验证.试验结果表明,本算法可在5min内实现1.3mil的抗干扰自对准精度.     

火箭发动机推力试验装置应用范围研究

提出并研究火箭发动机推力试验装置应用范围扩大问题,即推力试验装置如何适用于推力远远小于试验装置额定负荷能力的发动机的推力试验。指出并研究了其中关键技术问题,包括试验装置机械结构与发动机的安装与配合、减小测力误差和原位校准的实现。建立了有关力学模型,分析了测力误差产生原因,并提出和论证了解决措施。研究结果表明,通过合理的设计,火箭发动机推力试验装置基本上可以用于推力小于试验装置额定负荷的任何规格的发动机的推力试验。     

The International DORIS Service (IDS): Toward maturity

DORIS is one of the four space-geodetic techniques participating in the Global Geodetic Observing System (GGOS), particularly to maintain and disseminate the Terrestrial Reference Frame as determined by International Earth rotation and Reference frame Service (IERS). A few years ago, under the umbrella of the International Association of Geodesy, a DORIS International Service (IDS) was created in order to foster international cooperation and to provide new scientific products. This paper addresses the organizational aspects of the IDS and presents some recent DORIS scientific results. It is for the first time that, in preparation of the ITRF2008, seven Analysis Centers (AC’s) contributed to derive long-term time series of DORIS stations positions. These solutions were then combined into a homogeneous time series IDS-2 for which a precision of less than 10 mm was obtained. Orbit comparisons between the various AC’s showed an excellent agreement in the radial component, both for the SPOT satellites (e.g. 0.5–2.1 cm RMS for SPOT-2) and Envisat (0.9–2.1 cm RMS), using different software packages, models, corrections and analysis strategies. There is now a wide international participation within IDS that should lead to future improvements in DORIS analysis strategies and DORIS-derived geodetic products.     

Method of virtual trajectories for the design of gravity assisted missions

A method of virtual trajectories is proposed for the design of multiple gravity assist trajectories. The method comprises two principal stages. First, for a chosen planetary sequence, a database of virtual trajectories is tabulated. Then the database screening and refinement are performed. The design of trajectory to Jupiter is presented.     

Forming and keeping fast fly-around under constant thrust

A new switching control algorithm under constant thrust is designed for the chaser fast flying around the target spacecraft along a specified fly-around trajectory. The switching control laws are obtained based on the acceleration sequences and the on time of thrusters which can be computed by the time series analysis method. The perturbations and fuel consumptions are addressed during the computation of the on time of thrusters. Furthermore, the relative position parameters of the target spacecraft are obtained by using the vision measurement and the target fly-around positions are calculated through the isochronous interpolation method. The change of the relative position and the relative velocity of the chaser during the constant thrust fast fly-around are presented through simulation example. It is proved that, with the switching control laws, the chaser will fast fly around the target spacecraft along the specified fly-around trajectory.     

发动机不可控高推力适航部分豁免方法研究

介绍了发动机不可控高推力(UHT)问题的产生背景,论述了申请§25.901(c)条款有关不可控高推力的部分豁免的思路和方法.结合FAA关于不可控高推力的指导材料,给出了有关不可控高推力的持续适航工作建议,对于飞机申请§25.901条款有关不可控高推力的部分豁免具有一定的指导意义     

连续推力机动轨道优化设计的贝塞尔曲线法

提出一种基于贝塞尔曲线的平面机动轨道设计方法。该方法将贝塞尔曲线方程与轨道形状方程相结合，利用得到的复合函数作为轨道方程来对机动轨道进行数学描述；通过约束条件获得可行的机动轨道族，由控制点设计给出具体的优化变量，将累积速度增量作为优化指标函数；并利用优化算法完成参数优化，从而得到最优机动轨道。最后针对设计的机动轨道推力峰值较大的问题，进一步提出了分段贝塞尔曲线法，在降低推力峰值的同时，可进一步降低燃料消耗，并在平面机动转移轨道设计的基础上，通过梯度下降对自由控制点进行修正，解决了考虑时间约束的平面轨道交会问题。     

主/从动式组合旋翼悬停状态气动特性分析

针对传统直升机构型中主旋翼旋转时产生的扭矩需要尾翼或是反向旋转的共轴旋翼加以抵消,从而造成能量浪费的问题,以将主旋翼旋转时产生的扭矩转化为升力为出发点,提出了一种主旋翼带动下方无动力旋翼旋转的主/从动式组合旋翼气动布局构型。通过动量叶素理论以及CFD数值模拟中的多重参考系法,对主/从动式组合旋翼悬停状态的气动特性进行了初步分析,结果表明,此构型中的下方从动旋翼利用上方主动旋翼的扭矩产生了额外10%的升力,同时下方从动旋翼在上方主动旋翼引流的有利干扰下升力系数提高了35%。     

微小推力下小卫星的轨道递推与推力标定

针对采用微小推力进行轨道机动的小卫星,考虑复杂摄动力的基础设计了一种高精度轨道外推和推力在轨标定算法.首先,建立了考虑地球复杂摄动力和微小推力的小卫星轨道动力学模型;然后基于动力学模型,利用变步长龙格库塔算法,设计了对微小推力小卫星进行高精度轨道外推的方法.随后通过无迹卡尔曼滤波器(UKF),设计在轨标定算法,对存在误...     

推力室逆置点火瞬时真空舱流场数值与试验研究

针对高空模拟舱内逆向布置的推力室点火瞬时过程中舱内压力的变化规律进行了理论和数值仿真分析,推力室高速气流的动能是推力室短程点火过程中舱内压力大幅上升的主要原因.为保证推力室点火时舱内的真空度,需要在推力室出口配置导流装置将燃气导出真空舱.对单台和4台并联推力室进行点火试验,试验表明：采用燃气导流能够较好保持舱内真空度,是整机多推力室高空模拟试验的新思路.