非线性传感器静态特性评估的极限点法

基于对测量过程、测量误差的认识，提出了一种利用极限点法评估非线性传感器静态特性的一种新方法。给出了利用该方法评估非线性传感器的两种模型。并以一电涡流式非线性位移传感器的标定数据进行了计算、分析。     

STUDY ON ALGORITHM OF SENSOR MANAGEMENT BASED ON FUNCTIONS OF EFFICIENCY AND WASTE

The sensor management system is a subsys-tem of a multisensor data fusion system,and itspurpose is to satisfy requests of multitarget andscanned space by using the limited sensor resourcesin order to gain optimal measurement values of allspecified characteristics ( detection and captureprobability,emission power of sensor,trackingprecision or target losing probability and so on) .By the optimal principle listed above,sensor re-sources are distributed in science and reason.In aword,itis a key p…     

The Cassini Cosmic Dust Analyzer

The Cassini-Huygens Cosmic Dust Analyzer (CDA) is intended to provide direct observations of dust grains with masses between 10⁻¹⁹ and 10⁻⁹ kg in interplanetary space and in the jovian and saturnian systems, to investigate their physical, chemical and dynamical properties as functions of the distances to the Sun, to Jupiter and to Saturn and its satellites and rings, to study their interaction with the saturnian rings, satellites and magnetosphere. Chemical composition of interplanetary meteoroids will be compared with asteroidal and cometary dust, as well as with Saturn dust, ejecta from rings and satellites. Ring and satellites phenomena which might be effects of meteoroid impacts will be compared with the interplanetary dust environment. Electrical charges of particulate matter in the magnetosphere and its consequences will be studied, e.g. the effects of the ambient plasma and the magnetic field on the trajectories of dust particles as well as fragmentation of particles due to electrostatic disruption.The investigation will be performed with an instrument that measures the mass, composition, electric charge, speed, and flight direction of individual dust particles. It is a highly reliable and versatile instrument with a mass sensitivity 10⁶ times higher than that of the Pioneer 10 and 11 dust detectors which measured dust in the saturnian system. The Cosmic Dust Analyzer has significant inheritance from former space instrumentation developed for the VEGA, Giotto, Galileo, and Ulysses missions. It will reliably measure impacts from as low as 1 impact per month up to 10⁴ impacts per second. The instrument weighs 17 kg and consumes 12 W, the integrated time-of-flight mass spectrometer has a mass resolution of up to 50. The nominal data transmission rate is 524 bits/s and varies between 50 and 4192 bps.This revised version was published online in July 2005 with a corrected cover date.     

燃气涡轮发动机地面试验传感器数据确认概念与方法研究

本文介绍了燃气涡轮发动机传感器数据确认系统的研究与应用现状,详细阐述了基于发动机和试验系统物理模型的解析冗余检验相关多传感器信号有效性方法,以及基于信号序列统计与时频特征分析的单传感器通道信号有效性的确认方法,提出了传感器数据有效性确认系统的研究框架。     

基于经验模式分解法的航空发动机振动传感器故障诊断技术研究

在深入研究经验模式分解法基本理论的基础上,针对航空发动机振动传感器故障的时频特征,提出一种基于经验模式分解法的传感器故障诊断新方法.该方法的关键在于将含有传感器故障的航空发动机振动测试信号进行经验模式分解,利用这种方法的局部自适应特性和时频多分辨率分析将传感器输出信号的局部特性细化,使故障信息凸显出来.分析结果表明,该方法可以准确诊断传感器软、硬故障,有效降低误报率和漏报率,具有很好的应用价值.     

基于超磁致伸缩材料的FBG电流传感器温度特性研究

针对基于超磁致伸缩材料的FBG电流传感器,分析了温度对传感头各个部分和整个传感头的影响,通过试验研究了FBG、Fe—Ga超磁致伸缩棒以及传感头三个部分的温度特性。结果表明,FBG的温度特性为线性,Fe—Ga超磁致伸缩棒以及传感头的温度特性整体为非线性,Fe—Ga超磁致伸缩棒的温度响应大于FBG的温度响应,传感头的温度特性主要取决于Fe—Ga超磁致伸缩棒的温度特性。在26℃到60℃范围内,根据传感头的温度特性,可采取分段补偿的方法消除温度影响,将温度特性分为线性区和非线性区两个范围,分别得到了传感头温度特性拟合方程。     

低成本无人机传感器配置方案的设计与仿真

以降低无人机制造成本为目标,在保证无人机安全自主飞行的前提下,提出了基于GPS和垂直陀螺、GPS和三轴速率陀螺及GPS和低成本惯性组件的3种低成本传感器配置方案,并针对每种方案在工程中遇到的问题,采用低通滤波、高通滤波和卡尔曼滤波等数据融合算法予以解决,最后在MATLAB平台下对每种传感器配置方案进行仿真验证.研究对比表明,对于自身稳定性较好的无人机,该3种传感器配置方案均能够实现姿态控制、高度控制、滚转控制以及航迹控制.     

测量围护结构含水率的同面散射场式电容传感器设计

目前常用的测量含水率的方法有微波法、红外线法和电容法.由于基于电容法的传感器具有分辨力高、响应速度快、体积小、结构简单等优点,被广泛应用.针对围护结构含水率测试深度的要求和测试特点,本文通过仿真和实验,对同面电容传感器探头的结构尺寸进行了优化设计,并采取了保护电极以提高其抗干扰能力;运用改进的充放电电容检测电路,设计出一种测量围护结构含水率的新型同面散射场式电容传感器,该传感器具有宽范围的测试深度和较高的测试灵敏度.     

无刷直流电机霍尔传感器安装方法研究

针对有位置传感器的无刷直流电机需要位置传感器提供换相信号的问题, 提出了基于磁势确定霍尔传感器安装位置的方法。霍尔传感器通过检测转子磁势确定转 子位置,产生传感器信号控制定子绕组换相,使得定、转子磁势相位差在60°~120°之间 波动,从而使电机输出最大力矩。通过实验测得使用该方法进行霍尔传感器位置安装的 无刷直流电机的输出力矩波形与理论一致,从而验证了此方法正确可行。     

用热流探针测量激波速度

激波速度测量是激波管和激波风洞运行状态的一个重要参数,压电传感器或光学方法测速系统成本高,而传统电离探针在激波马赫数较低、波后温度达不到空气电离程度的情况下无法满足实验要求。提出了一种使用同轴热电偶作为测速探针来测激波速度的方法,弥补了电离探针在激波马赫数较低时的不足。介绍了同轴热电偶探针测速原理,并设计了测量激波速度的系统电路。通过信号放大电路锁定激波冲激信号,触发脉冲信号发生电路,实现了一种单通道、多测点的激波风洞测速系统。分别开展以温度与热流为触发信号的风洞实验,结果表明只有使用热流信号才能满足激波测速的时间要求。