大跨时空任务背景下的太阳能无人机任务规划技术研究进展

通过任务规划技术合理的优化太阳能无人机的飞行轨迹和动力学参数,能够有效提高太阳能无人机的能量利用率,使其胜任许多大范围跨时间跨空间飞行任务。从能量建模、续航评估和能量管理策略3个方面对大跨时空任务背景下太阳能无人机任务规划技术的研究进展进行了综述。在能量建模方面,介绍了当前主流的太阳辐射模型和能量生产基本框架;在续航评估方面,分析了目前的指标设计和应用方法;在能量管理策略方面,从能量综合应用、风力滑翔机制、轨迹优化方法和面向特定任务的应用4个角度,梳理了当前的研究现状。最后,对该领域未来可能的研究方向进行了展望。     

民机襟翼交联机构吸能元件的吸能特性

采用有限元分析与冲击试验相结合的方式对膨胀管与波纹管的吸能特性进行探究：通过数值仿真分析对吸能元件的试验过程进行初步掌握,同时根据冲击试验结果对试验设计的不合理之处进行修正;然后开展两种吸能元件的动态冲击试验,探究其吸能特性,最终比较分析有限元仿真分析与落锤冲击试验的试验结果,选择效果理想的吸能元件应用到襟翼交联机构上。结果表明：无论是从吸能行程、吸能稳定性还是吸能结构的设计考虑,波纹管都是最适合应用到交联机构中的吸能元件,该吸能元件比吸能大,吸能过程平缓稳定,吸收能量之后只有塑性形变但结构不发生破坏,同时吸能行程短,吸能结构简单,便于安装拆卸。     

Shock protection of penetrator-based instrumentation via a sublimation approach

It is often necessary for space-borne instrumentation to cope with substantial levels of shock acceleration both in the initial launch phase, as well as during entry, descent and landing in the case of planetary exploration. Current plans for a new generation of penetrator-based space missions will subject the associated on-board instrumentation to far greater levels of shock, and ways must therefore be found to either ruggedize or else protect any sensitive components during the impact phase. In this paper, we present an innovative method of shock protection that is suited for use in a number of planetary environments, based upon the temporary encapsulation of said components within a waxy solid which may then be sublimated to return the instrument back to its normal operation. We have tested this method experimentally using micromachined silicon suspensions under applied shock loads of up to 15,000g, and found that these were able to survive without incurring damage. Furthermore, quality factor measurements undertaken on these suspensions indicate that their mechanical performance remains unaffected by the encapsulation and subsequent sublimation process.     

Stochastic modelling considering ionospheric scintillation effects on GNSS relative and point positioning

Global Navigation Satellite Systems (GNSS), in particular the Global Positioning System (GPS), have been widely used for high accuracy geodetic positioning. The Least Squares functional models related to the GNSS observables have been more extensively studied than the corresponding stochastic models, given that the development of the latter is significantly more complex. As a result, a simplified stochastic model is often used in GNSS positioning, which assumes that all the GNSS observables are statistically independent and of the same quality, i.e. a similar variance is assigned indiscriminately to all of the measurements. However, the definition of the stochastic model may be approached from a more detailed perspective, considering specific effects affecting each observable individually, as for example the effects of ionospheric scintillation. These effects relate to phase and amplitude fluctuations in the satellites signals that occur due to diffraction on electron density irregularities in the ionosphere and are particularly relevant at equatorial and high latitude regions, especially during periods of high solar activity. As a consequence, degraded measurement quality and poorer positioning accuracy may result.     

层次分析法在仿真系统可信度评估中的应用

以某仿真试验验证系统为例,在仿真试验验证系统VV&A 工作的基础上,运用层次分析法（A HP）对仿真试验验证系统的可信度进行了评估,得到了量化的可信度评估结果。该方法直观、条理性强、切实可行,具有一定的实际应用价值。     

SSPS-OMEGA超大型球形聚光器结构拓扑构型与设计

为同时兼顾千米量级尺度空间太阳能电站聚光系统的在轨发射安装难度、光学收集效率、稳定性及结构工艺等多方面的因素,提出采用基于球面正多面体的经纬线划分法模块化构建球形聚光器。该方法不仅可实现基础划分单元分布均匀、规格种类少,降低在轨构建与运载发射难度。而且只要合理控制弧高等分数和基础划分单元的口径就可以同时保证聚光系统的光学收集效率。理论与仿真结果显示,当弧高等分数为24时,该划分法共有25种基础单元件,整个球面被分成5762块。并且此时模块化构建的实际球形聚光器的光学收集效率与理想球面相比基本保持不变,解决了太阳能电站聚光系统设计中存在的关键问题。     

运载火箭推进剂复杂流动传热问题数值模拟中的模型简化方法

在运载火箭改进优化或新型运载火箭设计过程中,会遇到各种复杂的流动与传热问题。按照真实产品和物理过程直接建立的数值计算模型过于复杂,不同尺度的结构、流动与传热、长时间的飞行过程相互耦合,出现计算时间太长(数年)、收敛困难、程序调试困难等问题。针对初始条件复杂、飞行过程复杂、边界条件复杂3类具体问题,总结了3种相应的模型简化方法,分别是工程经验法、极限参数法、低维近似法,为推进剂复杂流动与传热的数值模拟提供参考。     

微纳InSAR卫星总体技术研究

微纳合成孔径雷达干涉(Synthetic Aperture Radar Interferometry, InSAR)卫星是对地定量化遥感的重要手段。开展了微纳InSAR卫星系统总体技术研究,给出了使得干涉测量覆盖范围最大的双星编队构型设计方法,建立了低燃料消耗双星轨道参数设计准则,提出高功能密度比InSAR卫星系统的设计方法,包括载荷平台一体化、卫星高集成模块化等总体设计方法,并给出了相应的设计实例。     

航电系统集成验证环境中的试验总控系统建设

针对国内军用航空修理行业系统级综合试验现状,根据航电集成验证环境中总控系统的特点和应具有的基本功能,结合视情维修需求及现代软硬件技术状态和成熟试验验证的手段,介绍了航电系统集成验证环境中总控系统的建设思路,给出了总控系统硬件及上位机测试软件的实现方案。该总控系统的应用将提升航电系统的修理验证能力。     

我国BPL时号的频率控制系统及结果分析

根据我国现行ＢＰＬ时号的频率控制系统,分析ＴＢＰＬ时号频率控制系统的缺陷,对目前ＢＰＬ时号的频率稳定性进行了评价,提出了一种新的频率控制方案。