基于北斗短报文的远程图像通信系统设计

北斗短报文功能在国防、民生和应急救援等领域都具有很强的应用价值。利用北斗短报文通信费用低廉的优点,设计了一款可进行远程图像传输的系统。针对北斗短报文通信的局限性,提出了相应的数据传输机制以保证远程数据传输的可靠性与有效性,并对系统功能进行了验证。测试结果表明,系统能够较快地完成图像数据传输的功能。     

State of art on energy management strategy for hybrid-powered unmanned aerial vehicle

New energy sources such as solar energy and hydrogen energy have been applied to the Unmanned Aerial Vehicle(UAV), which could be formed as the hybrid power sources due to the requirement of miniaturization, lightweight, and environmental protection issue for UAV. Hybrid electrical propulsion technology has been used in UAV and it further enforces this trend for the evolution to the Hybrid-Powered System(HPS). In order to realize long endurance flight mission and improve the energy efficiency of UAV, many researching works are focused on the Energy Management Strategy(EMS) of the HPS with digital simulation, ground demonstration platforms and a few flight tests for the UAV in recent years. energy management strategy, in which off-line or on-line control algorithms acted as the core part, could optimize dynamic electrical power distribution further and directly affect the efficiency and fuel economy of hybrid-powered system onboard.In order to give the guideline for this emerging technology for UAV, this paper presents a review of the topic highlighting energy optimal management strategies of UAV. The characteristics of typical new energy sources applied in UAV are summarized firstly, and then the classification and analysis of the architecture for hybrid power systems in UAV are presented. In the context of new energy sources and configuration of energy system, a comprehensive comparison and analysis for the state of art of EMS are presented, and the various levels of complexity and accuracy of EMS are considered in terms of real time, computational burden and optimization performance based on the optimal control and operational modes of UAV. Finally, the tendency and challenges of energy management strategy applied to the UAV have been forecasted.     

A self-healing strategy with fault-cell reutilization of bio-inspired hardware

The self-healing strategy is a key component in designing the bio-inspired embryonics circuit with the structure of cell arrays. However, the existing self-healing strategies of embryonics circuits mainly focus on permanent faults inside the modules of cells such as the function module and the configuration register, while little attention is paid to transient faults. From the point of view of obtaining high efficiency of hardware utilization, it would be a huge waste of hardware resources by permanent elimination when a cell only suffers a transient fault which can be repaired by a configuration mechanism. A new self-healing strategy, the Fault-Cell Reutilization Self-healing Strategy(FCRSS) which presents a method for reusing transient fault cells, is proposed in this paper. The circuit structures of all the modules in the cells are described in detail. In the new strategy, two processes of elimination and reconfiguration are combined. Within the process of fault-cell elimination, cells with transient faults in the embryonics circuit array could be reused simultaneously to replace the functions of the cells on their left side in the same row. Therefore, transient fault-cells in a transparent state can be reconfigured to realize the fault-cell reutilization. Finally,a circuit simulation, resource consumption, a reliability analysis and a detailed normalization analysis are presented. The FCRSS can improve the hardware utilization rate and system reliability at the expense of a small amount of hardware resources and reconfiguration time. Following the conclusion, the method of determining the optimal self-healing strategy is presented according to the environmental conditions.     

基于危险评估的自动紧急避撞控制策略

基于车辆危险评估机制,设计了一种集成制动和转向的汽车自动紧急避撞控制策略。首先结合车辆安全性和最优换道轨迹,分析了在紧急工况下车辆制动和转向避撞临界纵向距离,然后建立了基于模糊推理的危险评估模型,该模型输出的危险因子反映车辆发生碰撞的危险程度,并以此建立汽车自动紧急避撞控制策略。最后基于PreScan和MATLAB/Simulink的虚拟平台仿真验证该控制策略的有效性。结果表明自车在跟车行驶时,对比基于碰撞时间倒数(TTC~(-1))单一全制动无法有效避开障碍物的危险工况,该避撞策略能够通过制动和自主换道来避免车辆发生碰撞,提高了车辆安全性。     

新型运载火箭低温加注工艺流程及控制策略研究

运载火箭的不断更新换代,对科学的加注工艺提出了更高的要求。以某新型火箭液氧低温加注系统为研究对象,依据低温推进剂的加注结构特点,设计了液氧低温加注工艺流程及相应的控制策略,即以流量为控制目标的PID-DMC串级控制算法。采用分层控制策略,科学合理地通过调节阀门开关控制储罐压力大小,最终达到控制复杂加注系统的目的,并将其应用于某加注任务实践,取得了较好的效果,有效地提高了加注系统的可靠性、安全性。研究结果对新型火箭加注及决策具有实际指导作用。     

一种用于纳米颗粒场致发射推力器的自中和技术

纳米颗粒场致发射推力器(NFET)是一种用于微小卫星的固体工质静电推力器,为促进NFET的工程研制,提出一种新的自中和技术——反向充电中和策略。为研究这种自中和技术的设计方法,建立相应的数值模型以模拟该中和技术下羽流输运过程,并且,在真空舱中开展NFET的羽流测量试验来验证中和模型的正确性。以比色温度计和"打靶法"装置来分别测量羽流温度分布和推力,通过试验与仿真结果的对比,羽流温度变化的试验结果与仿真结果在定性规律上一致,推力的计算误差在9%～10%。在验证模型正确性的基础上,利用该数值模型对关键设计参数进行数值分析。结果表明:引出极与发射极的内径比变化会导致外加电场对剩余电荷颗粒作负功,引起推力下降,该物理参数在0.94附近时,推力达到极大值;而随着颗粒直径的增加,羽流中和区域整体向下游推移,推力升高。本文结论可为NFET的反向充电中和策略提供设计参考。     

随机追踪策略预测钟差的理论分析

稳健流逝性是时间区别于其它物理量的重要特征,决定了时间计量的滞后性。为了保障未来时刻的准确性,时间信号的预测及控制尤为关键。从理论视角分析了随机追踪策略的基本原理、预测不确定度以及关键参数优化等问题,明确了随机追踪预测钟差的运行机理,并进一步阐述了该方法的适用性,同时提出两点进一步改进的研究思路。     

美军指挥自动化系统一体化建设发展研究浅议

指挥自动化系统一体化建设是军队现代化建设的重要内容之一。本文就美军指挥自动化系统一体化建设的发展过程、长远目标和发展策略进行了初步探讨 ,以期对我军的指挥自动化系统一体化建设有一定的借鉴作用。     

嫦娥五号探测器系统级电性能测试设计与实践

针对嫦娥五号探测器综合测试中遍历在轨飞行状态引发的全面覆盖难度大,任务剖面及关键环节多引发的模拟飞行及健壮性测试要求高等问题,提出并实践了状态遍历及增量式集成的系统级测试方法,测试设计按照分状态分阶段分剖面的多层次验证策略,探索出了一套从"最基本启动,增量式叠加,分步骤集成"的整体性测试与验证的解决方案,达到了在项目早期将系统验证工作置于真实环境下开展测试评估的效果。同时也解构了探测器组成复杂,器间交互多,器内耦合多的系统级全覆盖难题。引入非侵入式监测技术解决了特定任务剖面及系统级条件下关键动作高保真数据获取的难题。与阿波罗载人登月相比,嫦娥五号探测器系统级测试设计实现了测试与评估可靠性活动在整器研制环节的流程左移,体现了中国航天器研制技术的特点。     

倾转旋翼飞行器的建模和操纵分配策略

针对倾转旋翼飞行器试飞样机建立了旋翼、机翼、短舱、机身、平尾、垂尾等部件的非线性气动模型和飞行动力学模型,研究了直升机模式、倾转过渡模式和飞机模式下的操纵特性,根据配平分析和小扰动线性化处理结果得到了不同飞行模式下的操纵效率,提出了一套适用于全飞行模式的操纵分配策略,解决了飞行控制随飞行模式变化出现的气动结构部件变化与操纵冗余的难题.利用所提出的操纵分配策略可使飞行控制器统一设计,无需按不同飞行模式设计不同控制律,有效降低了飞行控制器的设计难度.仿真验证了倾转旋翼飞行器飞行动力学模型的可信性和操纵分配策略的有效性.