基于电子束蒸发沉积的曲面纳米薄膜均匀性研究

半球谐振子金属化是半球谐振陀螺研制过程中的重要环节，针对半球表面薄膜制备均匀性难以实现的问题，提出了一种将薄膜沉积实验和光学模拟相结合的方法。本文采用电子束蒸发技术在半球上沉积Au薄膜，利用台阶仪测量球面上不同位点的薄膜厚度，将平面上的膜厚等效为半球曲面上的膜厚，研究球面薄膜的均匀性，得出了在半球内外表面上薄膜的膜厚分布；同时对薄膜沉积均匀性进行光学模拟，将半球探测器上辐照度等效为实验中沉积所得到的薄膜厚度，计算得出的半球探测器上辐照度分布与实验测量结果一致性较好，可为半球谐振子纳米薄膜的均匀性制备提供理论基础。     

Recent ozone investigations over Bulgaria by remote sensing: Ground-based and satellite data

This presentation deals with the recent investigations of the dynamics of the total ozone content (TOC) and of the lower troposphere ozone over Bulgaria, South-Eastern Europe.     

On prediction of re-entry time of an upper stage from GTO

The evolution of objects in geostationary transfer orbit (GTO) is determined by a complex interplay of atmospheric drag and luni-solar gravity. These orbits are highly eccentric (eccentricity >0.7) and have large variations in velocity and perturbations during a revolution. The periodic changes in the perigee altitudes of these orbits are mainly due to the gravitational perturbations of the Sun and the Moon. The re-entry time of the objects in such orbits is sensitive to the initial conditions. The aim of this paper is to study the re-entry time of the cryogenic stage of the Indian geo-synchronous launch vehicle, GSLV-F04/CS, which has been decaying since 2 September 2007 from initial orbit with eccentricity equal to 0.706. Two parameters, initial eccentricity and ballistic coefficient, are chosen for optimal estimation. It is known that the errors are more in eccentricity for the observations based on two line elements (TLEs). These two parameters are computed with response surface method using a genetic algorithm for the selected eight different zones, based on rough linear variation of the mean apogee altitude during 200 days orbit evolution. The study shows that the GSLV-F04/CS will re-enter between 5 December 2010 and 7 January 2011. The methodology is also applied to study the re-entry of six decayed objects (cryogenic stages of GSLV and Molniya satellites). Good agreement is noticed between the actual and the predicted re-entry times. The absolute percentage error in re-entry prediction time for all the six objects is found to be less than 7%. The present methodology is being adopted at Vikram Sarabhai Space Centre (VSSC) to predict the re-entry time of GSLV-F04/CS.     

基于旋度计算的流面生成算法研究

三维流场可视化一直以来是个很具有挑战性的问题.介绍了基于流线连接的流面生成方法,针对发散场中流线间距过大的问题,提出基于旋度计算的流面生成方法,通过流线法向量连线生成具有较好视觉效果的流带和流面,最后选取CDC风场数据对算法进行检验.     

基于NURBS曲面的雷达散射截面物理光学算法研究

文章实现了一种使用物理光学（PO）计算雷达散射截面的算法。目标模型用非均匀有理B样条（NURBS）曲面建立，并使用等参数等弦长方法剖分为Ⅳ个四边形面元。在剖分面元上，使用Gordon方法将物理光学积分转化为闭合区域线积分。整个算法在保持计算精度的前提下有较高的计算速度。     

《微电子制造工程》本科专业课程体系建设

为我国高速发展的电子制造业培养高级应用型人才是微电子制造工程专业的培养目标。本文在分析微电子制造工程内涵的基础上，阐述了微电子制造工程专业的课程体系建设的基本指导思想、基本原则与课程体系内容。     

Some Observational Evidence of Alfven Surface Waves Induced Magnetic Reconnection

The surface wave induced magnetic reconnection (SWIMR) model based on Alfven Resonance theory will be discussed briefly both for collisional and collisionless plasmas. It is shown that the spatial scales and time delays associated with Flux Transfer Events and Pulsed Ionospheric Flows, as observed by satellites and SuperDARN radars and the magnetic bubbles, observed at the high latitude boundary of the magnetopause, can be explained by the SWIMR model. This revised version was published online in August 2006 with corrections to the Cover Date.     

表面组装技术的应用与发展（下）

本文主要对表面组装技术的特点、表面组装工艺和表面组装技术的现状及发展趋势进行了全面的介绍，并分析了贴片机、网板印刷机、回流焊、波峰焊对表面组装工艺的影响。     

航天产品计算机集成制造系统研发项目管理组织结构研究

通过分析复杂航天产品的研制特点,利用现代项目管理的理论和方法,阐述了建立平衡矩阵组织结构等组织管理手段,有效地解决了航天产品计算机集成制造系统研发项目组织管理中存在的问题,为军工制造业数字化项目的实施提供可借鉴的管理经验。     

马赫数4～7的高超侧压式进气道气动设计与性能

对巡航马赫数为7、转级马赫数为4的宽范围侧压式进气道进行了设计,讨论了主要设计参数的选取原则,给出了一种曲面压缩的高性能侧压式进气道设计方案,并利用数值仿真手段对其流场结构及性能进行了研究.结果表明,所设计的侧压式进气道在马赫数Ma=4时的流量系数达到0.753,最大正攻角可达6°以上.Ma=6时,流量系数达到0.94...