NUM-1060 Ⅱ CNC系统自动回零程序设计

本文介绍了采用NUM-1060ⅡCNC系统，在设计制造CX600数控车铣加工中心过程中，通过E变量判断回零状态，调用Part功能子程序，完成自动回零的方法。该方法切实可行，已用于生产实际。     

平面动力系统的ω（α）极限集的一些性质

本文论述了平面动力系统的ω(α)极限集在轨道有界时的一些性质，并对轨道无界情形下其极限集的结构做了一些初步研究。     

凸轮逆序测量方法

目前各杂志所发表的关于凸轮测量的文章，所讨论的均是凸轮的顺序测量方法，有关凸轮的逆序测量(反求工程)方法，尚未见于文字。本文将对凸轮的逆序测量方法进行探讨。     

撩起"人性自私论"的面纱

随着我国社会改革的深入,"人性论"之争再次成为理论界关注的热点,这一争论,实质上是关系"举什么旗,走什么路"的问题.由于争论双方对"自私"含义的不同理解,往往使得争论成了两股道上跑的车.因此,撩起"人性自私论"的面纱,科学界定并明晰"自私"内涵,不仅是理论界统一思想,科学认识"人性"的前提,而且也是引导社会形成正确的价值理念,自觉抵制"人性自私论"侵蚀的重要保证.     

Planar dynamics of variable length multi-tethered spacecraft near collinear Lagrangian points

This paper examines the planar dynamics of a wheel-and-spoke configured multi-spacecraft system, connected together by variable length tethers, near the second Sun–Earth Lagrangian point. The closed form solutions of the system under some simple tether length functions are determined and numerical results for the tether pitch librations under more complex tether length functions are obtained, along with the control effort required to maintain the desired tether librations.     

基于全局稀疏地图的AGV视觉定位技术

为了实现自动导引车（AGV）在复杂工业环境下的高精度定位,克服环境变化给定位带来的影响,提出了基于全局稀疏地图的视觉定位方法。首先,设计了大容量二维编码点,作为人工路标铺设在工业环境的地面;然后,基于一种四边形识别算法,在复杂工业环境中准确分割和识别二维编码点;最后,利用二维编码点提供的编码信息,鲁棒匹配图像中的特征点,并以此为基础,使用一种分参数块优化的三维重建策略,实现了工业环境的大规模地图构建,为AGV视觉定位提供了一种稀疏电子地图。AGV视觉的定位通过匹配车载视觉传感器图像中的特征点和稀疏电子地图实现。停车重复定位精度小于0.5 mm,角度偏差小于0.5°,轨迹平均位移误差小于0.1%。实际应用结果表明,该方法能在复杂工业环境中实现AGV视觉的定位,定位的速度和精度方面都满足工业应用的要求,为AGV的视觉定位提供了新的思路。      

基于星体边缘和轨道投影的光学自主导航算法

针对光学导航中存在的通过星体（球体）图像部分边缘点拟合椭圆参数计算轨道参数产生中间误差的问题,提出利用边缘点映射轨道参数的直接投影模型,避免拟合椭圆参数的方法。在小孔成像模型基础上,建立了边缘点与轨道参数的直接投影数学模型,对其映射过程进行了理论推导,利用列文伯格-马夸尔特迭代算法进行求解轨道参数。用实际探测器以及镜头参数进行数值仿真验证,结果表明：该方法在相同边缘点的条件下,轨道精度可以达到5‰。与传统方法相比,这种方法避免了椭圆的拟合过程,减少了引入中间误差过程。     

Real-time clock comparison and monitoring with multi-GNSS precise point positioning: GPS,GLONASS and Galileo

The precise point positioning (PPP) technique is widely used in time and frequency applications. Because of the real-time service (RTS) project of the International GNSS Service, we can use the PPP technique for real-time clock comparison and monitoring. As a participant in the RTS, the Centre National d’Etudes Spatiales (CNES) implements the PPPWIZARD (Precise Point Positioning with Integer and Zero-difference Ambiguity Resolution Demonstrator) project to validate carrier phase ambiguity resolution. Unlike the Integer-PPP (IPPP) of the CNES, fixing ambiguities in the post-processing mode, the PPPWIZARD operates in the real-time mode, which is also called real-time IPPP (RT-IPPP). This paper focuses on applying the RT-IPPP for real-time clock comparison and monitoring. We review the principle of real-time clock comparison and monitoring, and introduce the methodology of the RT-IPPP technique. The observations of GPS, GLONASS and Galileo were processed for the experiments. Five processing modes were provided in the experiment to analyze the benefits of ambiguity resolution and multi-GNSS. In the clock comparison experiment, the average reduction ratios of standard deviations with respect to the G PPP mode range from 9.7% to 35.0%. In the clock monitoring experiment, G PPP mode can detect clock jumps whose magnitudes are larger than 0.9 ns. The RT-IPPP technique with GRE PPP AR (G) mode allows for the detection of any clock jumps larger than 0.6 ns. For frequency monitoring, G PPP mode allows detection of frequency changes larger than 1.1 × 10⁻¹⁴. When the RT-IPPP technique is applied, monitoring with GRE PPP AR (G) mode can detect frequency changes larger than 6.1 × 10⁻¹⁵.     

Spacecraft formation flying control around L2 sun-earth libration point using on–off SDRE approach

In this paper, on–off SDRE control approach is presented for spacecraft formation flying control around sun-earth L2 libration point. Orbits around libration points are significant targets for many space missions mainly because of efficient fuel consumption. Furthermore, less propellant usage can be achieved by considering optimal control approaches in spacecraft formation flying control design. Among various nonlinear and optimal control methods, SDRE has shown to be a popular controller in various missions due to the privileges including efficiency, accuracy and robustness. The spacecraft are assumed to have on–off thrusters as actuators. It requires them to be fed with a sequence of on–off pulses which is regarded as a challenge for spacecraft designers. Hence, the main contribution of this paper is designing an on–off SDRE approach for the formation flight around sun-earth L2 point with uncertainty with energy and accuracy considerations. Including on–off input as a constraint is not feasible for SDRE implementation because it makes the system non-affine. An alternative is utilizing an integral action technique and an auxiliary control to make the system affine which leads to on–off SDRE approach. It has also been shown that the proposed method is robust against parametric uncertainties of the states. Present study aims to design an energy-beneficial, simple and attractive controller for a complex nonlinear system with on–off inputs and uncertainty in CRTBP. Simulation results show that the on–off SDRE control could provide the formation flight around L2 point with high accuracy using less energy consumption.     

过虚拟交班点的能量最优制导律

针对固定目标的导弹过虚拟交班点制导问题，在希尔伯特空间下，基于最优化理论设计了有无终端落角约束两种情况下的全局能量最优制导律。通过对模型进行线性化，将提出的最优制导模型转化为线性二次型最优控制问题，在此基础上利用零控脱靶量（ZEM）概念对系统模型进行降阶，并推导出解析解。设计的制导律可以使导弹准确经过虚拟交班点，并实现期望终端落角。仿真结果表明，与经典制导律对比，该制导律可以显著减少全局控制能量消耗。