Detumbling strategy based on friction control of dual-arm space robot for capturing tumbling target

The rotational motion of a tumbling target brings great challenges to space robot on successfully capturing the tumbling target. Therefore, it is necessary to reduce the target’s rotation to a rate at which capture can be accomplished by the space robot. In this paper, a detumbling strategy based on friction control of dual-arm space robot for capturing tumbling target is proposed. This strategy can reduce the target’s rotational velocity while maintaining base attitude stability through the establishment of the rotation attenuation controller and base attitude adjustment controller. The rotation attenuation controller adopts the multi-space hybrid impedance control method to control the friction precisely. The base attitude adjustment controller applies the dual-arm extended Jacobian matrix to stabilize the base attitude. The main contributions of this paper are as follows: (1) The compliant control method is adopted to achieve a precise friction control, which can reduce the target angular velocity steadily; (2) The dual-arm extended Jacobian matrix is applied to stabilize the base attitude without affecting the target capture task; (3) The detumbling strategy of dual-arm space robot is designed considering base attitude stabilization, realizing coordinated planning of the base attitude and the arms. The strategy is verified by a dual-arm space robot with two 7-DOF (degrees of freedom) arms. Simulation results show that, target with a rotation velocity of 20 (°)/s can be effectively controlled to stop within 30 s, and the final deflection of the base attitude is less than 0.15° without affecting the target capture task, verifying the correctness and effectiveness of the strategy. Except to the tumbling target capture task, the control strategy can also be applied to other typical on-orbit operation tasks such as space debris removal and spacecraft maintenance.     

基于状态空间模型的无刷直流电机控制器设计

在无刷直流时机的位置伺服系统中，采用了基于状态空间模型的优化设计方法，综合出了次优控制器、建立了广义误差系统状态方程，并利用积分罚函数分段一经法处理伺服系统不等式约束的问题，得出了次优控制算法，经仿真证实，有杉该优化方法设计出的伺服系统的稳态跟踪误差为零；稳成输出不受阶跃干扰的影响；并具有期望的瞬态响应特性。     

应急救生系统逃逸动力装置的性能分析

载人航天中，应急救生分系统是火箭一飞船系统的重要组成部分，以联盟号应急救生系统为例介绍了其组成、工作程序并研究分析了逃逸动力装置──主逃逸发动机和控制发动机的性能参数与逃逸飞行弹道特性之间的相互关系；从逃逸弹道设计技术指标出发来选取动力装置的主要性能参数（推力大小及工作时间）。仿真计算得出了有益的结论。     

弱正则空间

本文给出了弱正则空间的定义,并研究了弱正则空间的性质,指出弱正则拓扑是一分离拓扑。     

带传动实验机的电磁兼容性分析

本文主要对带传动实验机噪声的产生和传播途径进行了全面的分析，从而为设计、安装、调试和使用带传动实验机提供了技术支持。     

卫星真空热试验中红外加热笼的创新设计

针对某型号卫星加热笼设计中的一些特殊问题,设计了一些特殊的处理方法,包括加热带双面涂黑漆的方法,加热笼结构设计中的一些特殊处理,以及支架控温装置等的设计。试验证明,这些方法在卫星真空热试验过程中取得了好的效果,可以为今后加热笼的设计开阔思路,有利于更好地完成试验任务。     

航天飞机气动力辅助异面轨道变换

本文研究了以气动力作为辅助动力,实现异面圆轨道的最优变换。以目标轨道面倾角最大为优化性能指标,获得了升力和滚转角的最优控制规律。文中提出了优化问题的一种参数搜寻方法,有利于问题的求解。文末对结果作了分析,讨论,并就有关的多种变换模态作了分析、对比,表明在一定条件下,气动力辅助变换有明显的优越性。     

Menger PM-空间上复合映射不动点定理的推广

设（X，F，△）和（Y，－↑F，△）是两个完备的MengerPM－空间，△是连续的H型t－范数，函数Φ（t）满足条件（Φ1)，本文在映射T：X→Y和S：Y→X满意更一般的条件下给出了关于复合映射TS和ST的不动点定理。这一定量进一步推广了Fisher,Sehgal和Bharucha-Reid等的有关结果，也是作者“MengerPM－空间上复合映射的不动点定理”一文的一般推广，最后给出了几个有用的结果作为本文主要定理的推广论。     

Information space of sensor networks: Lagrangian,energy-momentum tensor,and applications

It is a challenge to investigate the interrelationship between the geometric structure and performance of sensor networks due to the increasingly complex and diverse architecture of them. This paper presents two new formulations for the information space of sensor networks, including Lagrangian and energy–momentum tensor, which are expected to integrate sensor networks target tracking and performance evaluation from a unified perspective. The proposed method presents two geometric objects to represent the dynamic state and manifold structure of the information space of sensor networks. Based on that, the authors conduct the property analysis and target tracking of sensor networks. To the best of our knowledge, it is the first time to investigate and analyze the information energy–momentum tensor of sensor networks and evaluate the performance of sensor networks in the context of target tracking. Simulations and examples confirm the competitive performance of the proposed method.     

维修可达性建模及其应用分析

通过对飞机维修中的各个因素进行分析,基于波音737系列飞机建立一个维修可达性模型,并对模型中的各个模块分别开展可视性、实体可达性、操作空间分析,进一步验证了该模型的可行性和实用性,可为我国大飞机设计项目提供技术理论方法。