固体火箭发动机试验故障分析

从工程研制角度出发，探讨了分析固体火箭发动机试验失败原因的一般方法和过程，根据某发动机试验故障的具体情况，运用这种试验故障分析方法和过程（即针对试验故障进行故障树分析，设计复审分析，数据曲线的复核复算分析和验证试验），找出造成发动机试验故障的具体原因，确定故障机理；而后针对性地采取综合技术措施，并对这些措施进行试验验证，故障归零。     

固体推进剂远地点发动机的研制和关键技术

自1984年开始,中国研制的系列远地点发动机共9次参加卫星发射,均获成功,表现出很高的可靠性,高空比冲达到2834N·s/kg,质量比为0.895,性能达到了先进水平。该文介绍了远地点发动机的特点、技术水平和主要经验。其中采用丁羟推进剂、玻璃纤维壳体和碳/碳复合材料喉衬被证明为成功的技术选择。在研制过程中,在高空比冲的预示和测量,玻璃纤维壳体基体树脂的研制,高空点火和安全点火机构的研制,防止发动机自旋引起的烧蚀等技术问题方面,积累了丰富经验。对于在高空工作的发动机具有现实参考意义。     

翼柱型装药发动机点火升压过程计算

利用实验获得的翼槽内火焰传播规律经验公式,在Ｐ（ｔ）模型的基础上,建立了翼柱型发动机的点火升压计算模型。计算结果与实测数据吻合较好。同时就点火器流量、推进剂燃速、喷管堵盖打开压强等设计参数对发动机点火升压过程的影响进行了分析。     

A Geosynchronous Orbit Search Strategy

Since more than 10 years there is evidence that small-size space debris is accumulating in the geosynchronous orbit (GEO), probably as the result of breakups. Two break-ups have been reported in GEO. The 1978 break-up of an EKRAN 2 satellite, SSN 10365, was identified in 1992, and in 1992 a Titan 3C Transtage, SSN 3432, break-up produced at least twenty observable pieces. Subsequently several nations performed optical surveys of the GEO region in the form of independent observation campaigns. Such surveys suffer from the fact that the field of view of optical telescopes is small compared with the total area covered by the GEO ring. As a consequence only a small volume of the orbital element-magnitude-space is covered by each individual survey. Results from these surveys are thus affected by observational biases and therefore difficult to compare. This paper describes the development of a common search strategy to overcome these limitations. The strategy optimizes the sampling for objects in orbits similar to the orbits of the known GEO population but does not exclude the detection of objects with other orbital planes. A properly designed common search strategy clearly eases the comparison of results from different groups and the extrapolation from the sparse (biased) samples to the entire GEO environment.     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

固体火箭发动机地面性能换算成真空性能研究

根据固体火箭发动机内弹道计算模型，分析了使用大扩张比喷管地面静止试验性能与真空性能之间的联系，建立了由地面性能换算成真空性能的方法，计算出的真空推力、真空比冲等数据与实际相符。     

应用于空空导弹火箭发动机的少烟丁羟固体推进剂

研究了应用于空空导弹发动机中的一种少烟、低燃温下羟推进剂。推进剂具有中等燃速、微波衰减量低、在＋７０—－４０℃内具有优良的力学性能，经受了测试冲击、温度循环、气动加热及各种环境考验。试验证明：该推进剂性能稳定、可靠。     

斜切反喷管流场的数值模拟

为了在级间分离期间提供反推力，许多固体火箭发动机前端都装有一组斜切反喷管。由于反喷管的气动型面具有许多尖点，并且在超声速区有一个台阶，喷管内存在一系列激波，而且亚声速区和超声速区互相混杂。本文用时间相关法数值模拟了反喷管流场，控制议程用Ｍａｃ Ｃｏｒｍａｃｋ显格式求数值解，边界参数采用物理边界条件和从双特征线方法推导来的有效的特征方法为计算，为于固壁边界点，在不同的区域采用不同的方法对计算方程组求     

仿真模拟技术在固体火箭发动机操作训练中的应用

从导弹部队操作训练的角度出发,论述了固体火箭发动机仿真模拟训练的必要性和可行性,以及设想的仿真模拟训练系统的组成和功用.     

缠绕复合材料喷管静力分析

本文对由一般曲线旋转得到的喷管进行了静力分析。文中讨论的喷管由缠绕复合材料构成,承受轴对称和非轴对称载荷作用。在采用有限元法分析时,通过Fourier转换将三维问题简化为二维求解。弹性矩阵中各参数采用合理假设只需由层状平面内三个弹性常数即可确定。文中给出缠绕复合材料喷管在内压和集中力作用下的位移分布算例,结果合理。本文推荐方法可供缠绕柔性喷管和其它类似结构分析时参考。