关于Nielsen数的注记

通过构造基本群的正规子群，得到有限复迭空间和自映射的提升。并定义了NL数，指出用NL数可以估算自映射的Nielsen数。     

基于LabVIEW设计曲线拟合仪

基于LabVIEW图形化编程环境和软件分析库函数设计的曲线拟合仪，界面友好，功能齐全，操作简便，在科学研究和工程应用中具有较强的实用价值。文中简要介绍利用NI虚拟仪器技术设计曲线拟合仪的方法，给出软件设计思想与实现方案，对主要软件功能模块进行了分析。     

Modelling of Ejecta as a Space Debris Source

When a micro-debris or a micrometeoroid impacts a spacecraft surface, a large number of secondary particles, called ejecta, are produced. These particles can contribute to a modification of the debris environment: either locally by the occurrence of secondary impacts on the components of complex and large space structures, or at great distance by the formation of a population of small orbital debris. This paper describes firstly, the ejecta overall production, and secondly, the lifetime and the orbital evolution of the particles. Finally the repartition of ejecta in LEO is computed. Some results describing the population as a function of size and altitude are presented.     

Modelling of Spall in an Anisotropic Aluminium Alloy

Spall caused by hypervelocity impacts at the lower range of velocities could result in significant damage to spacecraft. A number of polycrystalline alloys, used in spacecraft manufacturing, exhibit a pronounced anisotropy in their mechanical properties. The aluminium alloy AA 7010, whose orthotropy is a consequence of the meso-scale phase distribution or grain morphology, has been chosen for this investigation. The material failure observed in plate impact was simulated using a number of spall models. The Hugoniot elastic limit and spall strength have been studied as a function of orientation, and compared to experimental results.     

星载遥感器在模拟空间环境中辐射定标设备研制

文章简述了星载遥感器辐射定标设备的研制过程及其在模拟空间环境中的调试过程,试验证明了该设备设计的合理性。     

载人航天可靠性与空间环境试验

文章通过对国外载人航天事故统计,分析各种空间环境条件对航天器及航天员的影响,阐述了空间环境试验对提高载人航天可靠性的重要意义,提出为了提高载人航天的可靠性,应进行充分和严格的空间环境模拟试验。     

航天飞机再入大气层三维机动飞行的最大过载和热流峰值

本文研究了航天飞机再入大气层三维机动飞行时所产生的最大过载及驻点的热流峰值,提出了一种计算最大过载及热流峰值的解析方法。在一阶近似运动方程的基础上,建立了最大过载、热流峰值与航天飞机的升阻比、再入角、滚转角等参数之间的解析关系式,由之可简便地确定最大过载与热流峰值。文中分析了升阻比、再入角等参数对过载和热流的影响,并与再入三维轨道精确解的相应值作了对比,表明此种解法具有一定的精度,可供再入三维轨道特性的分析及航天飞机的初步设计阶段使用。     

基于因子模糊化BP神经网络的磨损颗粒识别

在引入了一套磨粒形态学描述子来提取磨损颗粒的显微形态特征的基础上 ,采用人工神经网络技术 ,编制了用于磨损颗粒自动识别的 BP网络计算机模拟程序。在网络训练的过程中应用了本文引入的因子模糊化训练方法 ,使训练速度大大加快 ,以异或问题为例 ,速度可提高 5～ 1 0倍。应用此网络对磨粒测试库进行识别实验 ,识别正确率在 90 %以上 ,并且识别速度很快 ,大大优于传统的磨粒识别方法。     

Collision Risk Mitigation in Geostationary Orbit

The short- and long-term effects of spacecraft explosions, as a function of the end-of-life re-orbit altitude above the geostationary orbit (GEO), were analyzed in terms of their additional contribution to the debris flux in the GEO ring. The simulated debris clouds were propagated for 72yrs, taking into account all the relevant orbital perturbations.The results obtained show that 6–7 additional explosions in GEO would be sufficient, in the long term, to double the current collision risk with sizable objects in GEO. Unfortunately, even if spacecraft were to re-orbit between 300 and 500km above GEO, this would not significantly improve the situation. In fact, an altitude increase of at least 2000km would have to be adopted to reduce by one order of magnitude the long-term risk of collision among geostationary satellites and explosion fragments. The optimal debris mitigation strategy should be a compromise between the reliability and effectiveness of spacecraft end-of-life passivation, the re-orbit altitude and the acceptable debris background in the GEO ring. However, for as long as the re-orbit altitudes currently used are less than 500km above GEO, new spacecraft explosions must be avoided in order to preserve the geostationary environment over the long term.     

低地球轨道环境原子氧对航天器表面材料聚酰亚胺作用的数值模拟

在建立数学物理模型的基础上，对氏地球轨道环境和地面实验环境下，有无保护层的聚酰亚胺所受原子氧冲蚀作用进行了进行了成功的数值模拟，获得了具有工程应用价值的数值计算结果，并讨论了数学物理模型中各参数对基蚀曲线形状的影响。从数值模拟结果和美国太空实验结果的比较可以看出，本文数据模拟的结果是正确的。该项工作对航天器的设计具有重要指导意义。