基于协同多任务分配的飞机排班模型与算法

航空公司的航班运行一直存在安全与成本的矛盾:既要严格按规定完成飞机例行检修,优先保障运行安全,又要尽可能提高飞机日利用率,以降低运行成本.为此,研究基于协同多任务分配的飞机排班问题.分析例行检修约束,建立最优化飞机日利用率的数学模型,运用分枝定价算法进行求解.分枝定价算法引入检修节点和虚拟飞机节点的定义,将分配的航班飞...     

Design of a canard configured TransCruiser using CEASIOM

CEASIOM is a multidisciplinary software environment for aircraft design that has been developed as part of the European Framework 6 SimSAC project. It closely integrates discipline-specific tools such as those used for CAD, grid generation, CFD, stability analysis and control system design. The environment allows the user to take an initial design from geometry definition and aerodynamics generation through to full six degrees of freedom simulation and analysis. Key capabilities include variable fidelity aerodynamics tools and aeroelasticity modules. The purpose of this paper is to demonstrate the potential of CEASIOM by presenting the results of a Design, Simulate and Evaluate (DSE) exercise applied to a novel, project specific, transonic cruiser configuration called the TCR. The baseline TCR configuration is first defined using conventional methods, which is then refined and improved within the CEASIOM software environment. A wind tunnel model of this final configuration was then constructed, tested and used to verify the results generated using CEASIOM.     

多操纵面飞翼构型飞机舵面故障在线诊断方法

舵面故障会影响飞机的操纵性,为实现飞机的控制重构需在线诊断出舵面的故障信息.针对多操纵面飞翼构型飞机,提出了一种在线诊断其舵面故障的方法.飞翼构型飞机舵面故障在线诊断需辨识的操纵导数个数较多,直接使用最小二乘法难以精确辨识得到各操纵导数.基于限定记忆最小二乘法,采用分组辨识法对飞机的操纵导数进行辨识,减少了每次辨识操纵...     

基于SMDO的滑模控制器设计及其在导弹上的应用

提出了一种基于滑模干扰观测器(SMDO)的滑模控制器(SMC)设计方法.针对一类级联多输入多输出(MI-MO)非线性系统,根据奇异摄动原理将其分为内、外回路分别进行控制器设计.以外回路为例,分析了传统基于饱和函数的滑模控制的鲁棒性,针对其在面I临干扰时鲁棒性较差的问题,在名义滑模控制律的基础上设计了基于超扭曲算法的SM...     

基于H∞最优化与层次结构动态逆的非线性飞行控制器设计

针对扰动环境下的导弹飞行控制问题提出一种基于H∞最优化与层次结构动态逆(HSDI)的鲁棒非线性控制方法.设计层次结构动态逆控制器时将层次结构优化为3层,并按照时标分离的思想调整了各层次的状态变量,使得控制器更为简洁.在此基础上,将层次结构动态逆控制器与导弹6自由度(DOF)非线性模型联合作为H..控制的广义被控对象,通...     

一种针对冗余执行机构配置的修正直接分配算法(英文)

控制分配考虑期望控制量在冗余执行机构配置间的指令分配问题。本文基于执行机构的可达集提出一种修正直接分配新算法,重点解决该类算法的分配效率问题,并与修正伪逆再分配法、基于单纯形法求解的直接分配法线性规划模型以及次梯度优化算法进行对比分析。为减少原始直接分配法的离线计算时间,提出基于执行机构安装矩阵的零空间构建可达集信息,使离线计算时间在执行机构数目小于10时优于传统基于行空间的构建方法。在线计算中,提出基于单位可达集顶点信息寻找与期望控制量射线方向临近的可达集表面,从而缩小搜索范围、降低在线计算时间。仿真结果表明:修正算法不显著增加离线数据存储量,并将在执行机构数目小于10时至少降低32.22%的离线计算时间;在线计算中,其平均在线时间较对比算法均有大幅提高;在高度冗余控制分配问题中,修正算法将具有更大优势。     

Robust Hybrid Control for Ballistic Missile Longitudinal Autopilot

This paper investigates the boost phase’s longitudinal autopilot of a ballistic missile equipped with thrust vector control. The existing longitudinal autopilot employs time-invariant passive resistor-inductor-capacitor (RLC) network compensator as a control strategy, which does not take into account the time-varying missile dynamics. This may cause the closed-loop system instability in the presence of large disturbance and dynamics uncertainty. Therefore, the existing controller should be redesigned to achieve more stable vehicle response. In this paper, based on gain-scheduling adaptive control strategy, two different types of optimal controllers are proposed. The first controller is gain-scheduled optimal tuning-proportional-integral-derivative (PID) with actuator constraints, which supplies better response but requires a priori knowledge of the system dynamics. Moreover, the controller has oscillatory response in the presence of dynamic uncertainty. Taking this into account, gain-scheduled optimal linear quadratic (LQ) in conjunction with optimal tuning-compensator offers the greatest scope for controller improvement in the presence of dynamic uncertainty and large disturbance. The latter controller is tested through various scenarios for the validated nonlinear dynamic flight model of the real ballistic missile system with autopilot exposed to external disturbances.     

高超声速进气道附面层分离无源被动控制

为了控制超燃冲压发动机进气道唇口反射激波诱导的附面层分离,根据其流动特征,提出了附面层泄除-吹除互相驱动的自适应、无源、被动控制方案。并采用空间HLLE格式、LU-SGS隐式推进、多块结构网格的有限体积法数值模拟程序对该流动现象进行了数值模拟。数值结果表明,施加自适应无源被动控制后,分离区长度减小为无控制时的45%,控制区域的总压恢复系数和流场均匀性提高。从而证实了自适应、无源、被动控制抑制高超声速进气道附面层分离的可行性。     

涡轴发动机/直升机综合控制仿真平台设计

建立了UH-60直升机/T700涡轴发动机综合控制数字仿真平台。基于VC++环境开发了包含UH-60直升机/T700涡轴发动机综合实时模型的上位机程序,与运行机载涡轴发动机+旋翼实时模型及在线优化控制模式的下位机程序。两者基于TCP/IP协议实时通讯,可进行模拟实际直/发综合优化控制的数字仿真实验。在该数字仿真环境下,分别给出了提高直升机常规飞行性能的多种优化控制模式仿真、变旋翼转速优化控制以及快速功率跟随控制模式仿真,充分表明该平台可为新一代直/发综合系统的开发研制提供一个可靠的前期数字仿真验证。     

飞行器轨迹优化方法综述

飞行器轨迹优化是飞行器总体设计的关键环节,特别是在现代空间飞行器和高超声速飞行器设计过程中发挥着重要作用.在全面调研国内外现有轨迹优化技术的基础上,提出了飞行器轨迹优化新的分类方式,概述了多种飞行器轨迹优化的原理和应用,并详细分析了各自的优缺点和发展趋势.最后介绍了现在实际应用的多种轨迹优化软件.