微量气味成分的自由基簇射技术脱除

研究了密闭体系中微量气味污染物的脱除作用与机理。采用电晕放电自由基簇射技术，实现了人工环境下氧化性自由基的产生；以电子自旋共振技术（ESR）对气态羟基自由基实施了捕集和检测，验证了在羟基自由基的存在下NH3被氧化为N2。通过U—I获得反应能耗和污染物去除效率为：NH3脱除效率为90．6％时，能耗1．0W。研究表明：自由基簇射技术产生的氧化性自由基可有效去除密闭生存环境中产生的NH3等微量有害气味成分，将在空间站等密闭生存系统内空气净化中有很好的应用前景。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

Aircraft nonlinear stability analysis and multidimensional stability region estimation under icing conditions

Icing is one of the crucial factors that could pose great threat to flight safety,and thus research on stability and stability region of aircraft safety under icing conditions is significant for control and flight.Nonlinear dynamical equations and models of aerodynamic coefficients of an air craft are set up in this paper to study the stability and stability region of the aircraft under an icing condition.Firstly,the equilibrium points of the iced aircraft system are calculated and analyzed based on the theory of differential equation stability.Secondly,according to the correlation theory about equilibrium points and the stability region,this paper estimates the multidimensional stability region of the aircraft,based on which the stability regions before and after icing are compared.Finally,the results are confirmed by the time history analysis.The results can give a reference for stability analysis and envelope protection of the nonlinear system of an iced aircraft.     

“小信号谐振放大器”的教学策略

小信号谐振放大器是高频电子线路课程的基本单元电路之一,主要应用在通信系统的接收机电路中,高频放大和中频放大是信号传输电路中的核心部分。掌握小信号谐振放大器的分析方法,对电子信息类、通信工程类专业学生的学习及工作是非常关键的。     

α-l型区间可靠性分析方法及其工程应用

在区间非概率可靠性模型的基础上,以区间长度l和区间下限α为结构系统变量的输入参数,重新定义了一种新的可靠性指标,分析得到了这种可靠性分析方法的判定依据;在此基础上,在线性和非线性条件下讨论了结构可靠度的计算方法.以某型飞机防冰引气管结构为例,进一步探讨了所提方法在共振可靠性分析当中的工程应用.     

加装吊舱对飞机操稳特性的影响及其尺寸界定

在机身等部位加装吊舱会导致飞机气动外形发生变化,为保证飞行安全,需要评估吊舱对飞机操稳特性的影响.通过CFD方法计算了某型飞机在加装不同尺寸吊舱下的气动特性,在原型机基础上通过增量法建立飞机飞行动力学模型,以必要的操稳特性指标为依据,评估加装吊舱对原型机操稳特性的影响,并结合飞行品质标准及飞机使用限制,给出了吊舱尺寸界限.结果表明,加装吊舱对原型机短周期模态、螺旋模态、定常直线平飞和俯仰拉升时的操纵有一定的影响,依据影响绘制尺寸界定区域图可为飞机改装提供依据.     

预燃式等离子体射流点火器工作特性实验研究

为解决发动机点火包线小于飞行包线的实际问题,提供等离子体点火技术在航空发动机中的工程应用新思路,论文设计了一种预燃式等离子体射流点火器,实验研究了放电特性和射流特性。结果表明,预燃式等离子体射流点火器与空气等离子体射流点火器相比,在提升射流能量降低电源功率方面有着较大的优势,电流相同时通入甲烷在较大流量时可减小驱动电源功率,总流量为44L/min时,减幅可达14.99%;同时预燃式等离子体射流较空气等离子体射流稳定,且射流长度增加,扩大了点火面积,有利于点火。     

航空发动机适航审定喘振与失速影响因素

将气动热力基础理论与适航领域工程问题有机结合,对典型的喘振和失速影响因素开展了系统的研究,发展了一套多影响因素作用下航空发动机稳定裕度快速预估方法;在此基础上以JT9D发动机为研究对象,开展了喘振和失速主要影响因素的影响规律研究,结果显示对风扇部件稳定裕度影响权重最大的是进气畸变,对增压级和高压压气机影响权重最大的是寿命期内结构衰变。研究结果进一步明确了喘振和失速适航条款符合性验证活动的关键要素,完善了条款适航符合性验证流程,为进一步提升我国民用发动机适航审定能力提供了技术支撑。     

不同环境因素对引压管腔动态特性影响

为了探索引压管腔在动态压力校准和使用中不同环境因素对动态特性的影响,推导了管腔传压模型和谐振频率关系式,确立了影响管腔动态特性的参数,包括静态压力、温度、气体介质等。采用引压管腔专用实验装置进行了不同环境参数状态的实验验证,结果表明:静态压力仅会影响管腔在谐振频率附近的输出,随着静态压力的增大而非线性增大,对动态特性并无明显改变;温度会改变管腔的谐振频率和动态特性,随着温度的升高,谐振频率增大但输出幅值随之减小;气体介质的不同会彻底改变管腔动态特性,主要取决于介质的声速。该研究为引压管腔在使用环境下数据的评价和数据修正上提供了一定参考依据。     

整体弹性结构法及在叶片流固耦合分析中的应用

针对三维叶片时域流固耦合振动响应计算普遍耗时的问题,采用一种假设整体结构的模态位移,求解固体时域响应和实现高效网格变形,发展了一种3维时域流固耦合分析的整体弹性结构方法,并应用于压气机叶片0°和180°相位角的气动稳定性分析中。结果表明,所发展方法的计算结果与传统双向时域算法和文献的结果较为吻合,而计算效率相比于传统算法显著提升;在所分析的两个相位角下,叶片振动的气动阻尼均随流量减小先增大后降低,相比于0°相位角,180°下叶片的气动稳定性大幅提高,表明该方法能有效应用于叶片的工程流固耦合研究。