综合环境试验系统研制中的技术问题

温度、振动、湿度综合环境试验系统是工程研制、鉴定和生产可靠性试验的必备的设备。根据可靠性试验要求，介绍了综合环境试验系统研制过程中所遇到的试验箱高温度变化速率、振动台大台面和大位移、振动和冲击控制算法等技术难点，并给出了解决途径。     

航模驱鸟设备的综合安全性研究

综合分析了影响航模驱鸟设备安全性的航模、操纵者及环境三方面的因素,为了提高航 模驱鸟设备的综合安全性,结合专家经验及数据,提出了相应的保证安全的措施。     

Self-similar neutrino heat waves

Transport of energy and lepton charge by neutrino radiation in a uniform medium is investigated within neutrino-thermoconductivity approximation — as a neutrino heat wave. The process is described by a self-similar solution. The problem applies primarily to the cooling of young neutron stars.     

The infra-red background generated by pregalactic stars and their remnants

We examine whether the IR background reported by Matsumoto (1983) could have been generated by stars or black holes in the pregalactic era, z=10100.     

用电荷耦合器件测量激波辐射

用电荷耦合器件作摄谱探头，进行激波辐射的测量，解决了测量中遇到的同步问题。测量结果与一米光栅摄谱仪的记录干板比较，效果良好。     

KM3大型空间环模设备放气污染检测与污染控制

首次建立了对空间环模设备放气污染检测的6种测试方法,应用于KM3大型空间环模设备的多次试验中,并依据检测结果,对 KM3系统的污染特性从污染来源、成分及分布进行了详细论述,提出了一些相应的控制方法。     

热管辐射器热分析

大多数航天器的热控制都是利用空间辐射器作为排热部件。在空间辐射器上，安装热管将极大地提高空间辐射器的散热能力。热管辐射器是一种传热性能极好、运行安全可靠的空间辐射器。文中介绍了典型热管辐射器的结构型式，对平面双组热管辐射器和柱面双组热管辐射器进行了详细的热分析，完成了典型柱面双组热管辐射的性能计算，并计算出流体温度和辐射肋片温度的变化。     

涡轮机匣热辐射-对流耦合换热特性数值计算与实验测试

开展了整环机匣的热辐射-对流耦合计算,获得了综合传热系数拟合关系式,并进行了实验测试验证。研究发现：封闭腔内,热辐射的存在大幅强化了壁面换热,辐射热流占总换热量比值可达90%以上。在3层机匣结构中,当发射率在0.3~0.8变化时,机匣沿径向方向上的温度梯度减小,主流区域的对流换热得到加强,半封闭区域对流强度降低。发射率为0.8时,外机匣流体侧壁面的辐射热流占总换热量的33.3%。     

Design and experimental performance verification of a thermal property test-bed for lunar drilling exploration

Chinese Chang'e lunar exploration project aims to collect and return subsurface lunar soil samples at a minimum penetration depth of 2 m in 2017. However, in contrast to those on the Earth, automated drilling and sampling missions on the Moon raise the risk of burning bits.Test-beds are required for testing the thermal properties of drill tools in a lunar environment. In this paper, a novel temperature measuring method based on thermocouples and a slip ring was proposed. Furthermore, a data acquisition system for a drilling process was designed. A vacuous,cryogenic, and anhydrous soil environment simulating the lunar surface was established. A drilling test-bed that can reach a depth of 2.2 m was developed. A control strategy based on online monitoring signals was proposed to improve the drilling performance. Vacuum and non-vacuum experiments were performed to test the temperature rising effect on drill tools. When compared with the non-vacuum experiment, the vacuum temperature rise resulted in a 12 °C increase. These experimental results provide significant support for Chinese lunar exploration missions.     

气氮调温器Y型喷嘴实验及数值研究

基于FLUENT软件离散相模型及气体助力雾化模型,采用欧拉-拉格朗日方法研究通过Y型喷嘴雾化液氮的雾化特性.由于液氮液滴的蒸发相变,与水相比喷雾锥角更清晰且明显减小,约为10°,喷雾距离缩短.分析喷嘴气液工作压力对液氮雾化索太尔平均直径（SMD）、液滴体积分数和数量分数的影响.结果表明：SMD沿喷射方向变化幅度极小;SMD主要受气相速度及气液比影响,气压低时气相速度影响较大,气压高时气液比影响较大;由于相变作用,液氮雾化粒径分布更为集中.数值研究Y型喷嘴用于不同流量需求的气氮调温器的调温效果,出口温度低于98K,进出口温差达到12K,且整个出口温差在±1K以内,能够实现精确控温要求.