阵风载荷减缓系统故障分析

阵风引起的额外载荷会引起飞机结构疲劳,降低结构使用寿命。采用非定常气动力有理函数拟合方法建立时域状态空间下的动力学系统,设计了阵风载荷减缓系统。研究了阵风载荷减缓系统3种典型故障模式(副翼偏转饱和、舵机卡死、副翼偏转延时)的力学建模方法,并对机翼在阵风减缓系统故障模式下的阵风响应进行分析。仿真结果表明,3种故障模式均不利于阵风载荷减缓系统对阵风载荷的减缓,对于一些特定情况,故障模式下的阵风载荷减缓系统不仅不能减缓阵风载荷,还会带来由副翼偏转不当引起的额外负载。     

简论高校实验课程的改革

实验教学是高等院校教学过程的一个重要环节,应建立新型的实验室管理模式,从开放实验室和改革教学方法两个方面出发,阐述了实验课程改革的必要性。     

Aerodynamics of smart flap under ground effect

Aerodynamic characteristics of two-dimensional smart flap under the ground effect have been assessed by a numerical simulation. In this process, a pressure-based implicit procedure to solve Navier–Stokes equations on a nonorthogonal mesh with collocated finite volume formulation is used. The boundedness criteria for this procedure are determined from the Normalized Variable Diagram (NVD) scheme. The procedure incorporates the k–ε eddy–viscosity turbulence model. Cantilever beam with uniformly varying load with roller support at the free end is considered for the configuration of the smart flap. The method is first validated against experimental data. Then, the algorithm is applied for turbulent aerodynamic flows around airfoil with smart and conventional flaps for different attack angle, flap angle and ground clearance where the results of two flaps are compared. The comparisons show that the quality of the solution is considerable.     

激光器性能综合测试设备研制

介绍了激光器的主要性能指标,根据实际需要进行了激光性能测试设备的研究,提出了一种周全的激光性能测试设备研制方案,对该设备的结构设计、光路设计、以及测试方法作了详尽论述。设备中利用两对相互垂直的P分光镜和S分光镜以补偿偏振光在45°面上透反射率不同而造成的测量误差,进一步保证了激光能量测试的准确性。误差分析结果表明该设备满足实际应用中对激光器性能的测试要求。     

Theoretical aspects of selecting repeated unit cell model in micromechanical analysis using displacement-based finite element method

Repeated Unit Cell(RUC)is a useful tool in micromechanical analysis of composites using Displacement-based Finite Element(DFE)method,and merely applying Periodic Displacement Boundary Conditions(PDBCs)to RUC is almost a standard practice to conduct such analysis.Two basic questions arising from this practice are whether Periodic Traction Boundary Conditions(PTBCs,also known as traction continuity conditions)are guaranteed and whether the solution is independent of selection of RUCs.This paper presents the theoretical aspects to tackle these questions,which unify the strong form,weak form and DFE method of the micromechanical problem together.Specifically,the solution’s independence of selection of RUCs is dealt with on the strong form side,PTBCs are derived from the weak form as natural boundary conditions,and the validity of merely applying PDBCs in micromechanical Finite Element(FE)analysis is proved by referring to its intrinsic connection to the strong form and weak form.Key points in the theoretical aspects are demonstrated by illustrative examples,and the merits of setting micromechanical FE analysis under the background of a clear theoretical framework are highlighted in the efficient selection of RUCs for Uni Directional(UD)fiber-reinforced composites.     

ENERGY-SAVING MATCHING STRATEGY AND EXPERIMENTAL STUDY OF PUMPING SYSTEM FOR TRUCK-MOUNTED CONCRETE PUMP

Aiming at the high fuel consumption and use-cost of truck-mounted concrete pump , an energy-saving matching strategy of pumping system is presented and the experimental study is conducted.Since pumping system occupies most resources of engine , the matching strategy between engine and main pump is analyzed to meet the load demand and reduce the engine rational speed drop.The testing method is established to measure the fuel consumption of engine under various working conditions , and the experimental data are analyzed to find the law of the fuel consumption of engine.The system performance can be improved by adjusting the system input value.Finally , the energy-saving matching strategy is established to reduce the fuel consumption of truck for unit workload , which provides a new approach for the energy-saving of truck-mounted concrete pump.     

野战环境下大型飞机超低空气动特性分析

针对野战环境下的大型飞机超低空飞行,采用CFD方法对地面存在前向或横向不对称障碍物时地面效应对气动参数的影响进行了数值分析,包括纵向稳定性和侧向摇晃等问题.研究结果表明,野战等非常规飞行条件下,地面不确定障碍物会造成大型飞机稳定性变差,严重时可能出现纵向点头和横侧向摇晃现象,容易导致触地危险.最后,从现代飞行控制理论角度提出了对常规布局大型飞机进行闭环控制的研究思路.     

自动导引车在工业4.0 中的应用

随着工业4.0概念的逐步成熟,智能化工厂、智能化生产以及智能化物流将是未来很长一段时间的发展模式,传统的制造企业会面临智能化的升级和转型.在此背景下,从提高工业化生产自动化程度的角度入手,在生产流水线中引入自动导引车.然后针对每一种导航方式分析其优缺点,并且结合现代化生产方式的特点,通过对具体的应用案例进行分析,从原理上重点阐述了激光导引的情况,同时分析了自动导引车(AGV)的发展趋势,为企业后续在选择适合自身特点的自动导引车方面提供了参考.     

磁强计数据辨识卫星自旋状态

针对近地低轨三轴稳定卫星在轨管理后期,除磁强计外其他姿态敏感器都无效情况下的姿态异常问题,分析了三轴稳定卫星失去姿态基准后,星体自旋状态下三轴磁强计测量数据的特点,提出了使用磁强计测量数据的矢量信息,以找到能够获取卫星状态的方法,从而建立了磁强计测量矢量与卫星自旋轴的几何关系,给出了处于自旋状态下的卫星自旋轴确定方法。通过此种辨识方法,获得了某气象卫星姿态异常翻转状态下的自旋矢量方向和自旋角速度,从而证明了该辨识方法快速、有效,可以作为姿态异常卫星自旋状态的辨识手段,为恢复卫星姿态提供了重要信息,具有一定的工程应用价值。     

基于测控系统的质量信息监测系统设计与应用

在测控试验现场,针对测控设备状态和测控数据的质量信息,采用智能自动监测技术对设备和测控数据进行实时监视以及动态分析,提出了科学的异常判决方法和处理方案,开发了试验质量信息综合分析实时监测系统,实现了测控流程智能化管控、测控信息自动分析处理和质量信息自动化管理。在多颗卫星的跟踪验证中,质量信息监测系统对卫星长期管理的宏参数宏配置下发、标校和目标捕获与跟踪等任务过程能够进行准确监视,可以及时监测到测控数据和测控时间的异常并报警,并能够自动生成任务实施登记表等测控质量报表。实验表明,质量信息监测系统软硬件设计完善、状态监测点设置合理、判读测控事件方法有效。