一起发动机软轴断裂引发直升机双发停车的故障分析

通过对一起米-171直升机空中双发停车故障原因的探究,分析了造成双发停车的原因,剖析了发生问题的主要根源,为今后防止发生此类问题提供了借鉴.     

Hot-cracking susceptibility and shear fracture behavior of dissimilar Ti6Al4V/AA6060 alloys in pulsed Nd:YAG laser welding

Laser welding of dissimilar titanium/aluminum alloys has been employed at an increasing rate, particularly in the aerospace industry, owing to its advantages in terms of current design flexibility and fuel/cost savings. The major problem with dissimilar Ti/Al welds arises from the difference in the thermal expansion and contraction of the two metals, which leads to hot-cracking susceptibility and the mitigation of the mechanical property after welding. In the present study, pulsed Nd:YAG laser welding of Ti6Al4V and AA6060 has been addressed. Hot-cracking susceptibility in the heat affected zone and the shear fracture behavior of the lap joints were investigated through microstructural characterization and mechanical tests. The results indicate that the hot cracking tendency can be reduced by increasing the pulse peak power (7.5–8.5 kW) and the laser point diameter (0.8–1.0 mm) with specific pulse duration and overlap. An alternative control strategy for less hot cracks in the Ti/Al lap joint can be to increase the weld width and decrease the cooling rate during solidification. The shear fracture of the Ti/Al lap joint is likely to occur along the lower side path of the weld interface with decreasing weld surface collapsed amount and increasing aluminum base metal melt depth.     

一种航天器用外热防护涂层材料研究

研制了一种由环氧改性有机硅树脂、聚酰胺类固化剂为基体,以隔热及耐热填料为添加剂的室温固化耐高温外热防护涂料体系;该外热防护涂层材料的拉伸强度3.15MPa,断裂伸长率26%;热导率0.271W/(m.K),比热容2.689 J/(g.K),而且具有优良的隔热性能、耐热性能以及良好的附着力。该涂层材料可用于T700/4319复合材料壳体表面的外防护,并可在350℃温度条件下短期使用。     

Design of tracking mount and controller for mobile satellite laser ranging system

In this study, we have proposed and implemented a design for the tracking mount and controller of the ARGO-M (Accurate Ranging system for Geodetic Observation - Mobile) which is a mobile satellite laser ranging (SLR) system developed by the Korea Astronomy and Space Science Institute (KASI) and Korea Institute of Machinery and Materials (KIMM). The tracking mount comprises a few core components such as bearings, driving motors and encoders. These components were selected as per the technical specifications for the tracking mount of the ARGO-M. A three-dimensional model of the tracking mount was designed. The frequency analysis of the model predicted that the first natural frequency of the designed tracking mount was high enough. The tracking controller is simulated using MATLAB/xPC Target to achieve the required pointing and tracking accuracy. In order to evaluate the system repeatability and tracking accuracy of the tracking mount, a prototype of the ARGO-M was fabricated, and repeatability tests were carried out using a laser interferometer. Tracking tests were conducted using the trajectories of low earth orbit (LEO) and high earth orbit (HEO) satellites. Based on the test results, it was confirmed that the prototype of the tracking mount and controller of the ARGO-M could achieve the required repeatability along with a tracking accuracy of less than 1 arcsec.     

基于加权最小二乘法的大部件对接位姿评估算法研究

本文以定位器支撑的大部件调姿系统为研究对象,通过激光跟踪仪测得大部件上多个测点坐标数据.针对各点在不同坐标系下测量点值不匹配且各点精度要求有差异的问题,提出了最小二乘法评估大部件位姿的模型,并利用权值实现对多个测点数据进行误差分配优化,为大型部件的位置姿态评估计算提供一套有效的解决方案.     

中国环境绩效审计研究述评

当前,环境问题已经逐渐超越国界成为一个全球性的问题,世界各国对于环境相关的财务问题尤其是环境会计和环境审计越来越重视,而环境绩效审计是环境审计的重要方面和发展趋势。为了对环境绩效审计研究的发展轨迹与现状得到一个全面、准确的认识,文章在掌握了国内大量相关资料的基础上,运用规范研究方法,对环境绩效审计研究所涉及的定义、内容和方法进行了简要地总结和评价,并对未来的环境绩效审计研究提出了相应的建议,以期丰富我国的环境绩效审计理论。     

GPRS技术在环保监测领域的应用

随着工业的快速发展,环保问题日趋严重,人们对环境保护的意识日益提高,要求对污染源必须进行24小时不间断的实时监测。设计一种采用GPRS技术的方式,解决原有环保监测传输控制器费用高、覆盖范围小的问题,实现在环保监测系统中增加或减少污染源的环保监测点对污染值影响的最小化。     

激光捷联惯导系统温度误差补偿研究

针对激光陀螺惯性导航系统中惯性器件零偏随温度变化的情况,在-30℃～+50℃温度范围内,通过大量的温度实验,建立了零偏与温度变化的多项式模型,并用该模型对实验数据进行了补偿,扣除地速和重力加速度的分量,惯性器件输出几乎为零。最后在不同温度下进行了初始对准实验,实验结果表明：经过温度补偿后,在-30℃～+50℃ 温度内,俯仰角误差平均在0.0019° 以内,横滚角误差平均在0.0038°以内,航向角误差平均在0.014° 以内,接近了常温下的初始对准精度,满足了系统的指标要求。     

合成气扩散燃烧的OH-PLIF测量

为了解中低热值合成气在燃气轮机燃烧室中的燃烧特性,利用平面激光诱导荧光(PLIF)法,对模型燃烧室内CH4和具有不同C-H比的合成气旋流扩散火焰开展实验研究.实验结果表明,CH4与合成气火焰呈现出截然不同的火焰形状,瞬态OH-PLIF图像揭示了它们具有湍流火焰的共同特征,且火焰都稳定在喷嘴出口位置.相比之下,CH4燃烧...     

一种从混合表面的明暗变化恢复形状的新算法

针对传统的混合表面形状恢复算法存在较大误差的问题,提出了一种基于透视投影的从混合表面的明暗变化恢复形状的新算法.首先,建立了一种改进的Ward反射模型来描述混合表面的反射特性,其次,采用更接近摄像机实际拍摄的透视投影方式,并且假定光源位于摄像机的光心处,构造了新模型下的图像辐照度方程,然后将该方程转化为包含物体表面深度信息的Hamilton-Jacobi偏微分方程,使用Fixed-point Iterative Sweeping方法和2D Central Hamiltonian函数逼近该微分方程的黏性解,进而得到物体表面的三维形状.与同类算法相比,新算法恢复的结果更加准确有效.合成花瓶图像的实验结果表明,与基于正交投影的算法相比,新算法恢复三维形状高度的平均误差和均方根误差均有较大幅度减少.