基于黑盒测试环境的交会对接软件时序分析技术及应用

航天器空间交会对接难度大,GNC软件对任务的完成起到重要作用.由于交会对接控制软件功能复杂,时序要求严格,这对软件测试提出了很高的要求.基于黑盒测试环境,利用FPGA设计方法和时序分析技术,实现了对交会对接软件重要数据运行时序的捕获和对上下行信号相位关系的跟踪,完善了故障触发和上行注入手段.该测试环境在交会对接软件研制过程中起到重要作用.     

改进的风险优先数(RPN)分析方法

针对工艺故障模式影响分析(PFMEA,Process Failure Modes and Effects Analysis)中风险优先数(RPN,Risk Priority Number)分析方法存在的缺陷,在分析导致这些缺陷的原因的基础上,提出了一种基于费用及发生概率的定性与定量相结合的RPN分析方法.该方法中定性分析部分以传统RPN分析方法中的严酷度等级评价为基础,对工艺故障模式的严酷度等级进行评价;定量分析部分以故障模式发生后导致的费用损失的期望值作为RPN值.改进后的RPN分析方法中,定量化的数据使得风险排序更为客观、准确.最后,使用改进后的RPN分析方法对相控阵雷达中某组件的滤波器装配工艺进行了PFMEA分析,取得了良好的效果.      

基于超声波的移动机器人多目标探测定位方法

为了使移动机器人能够对离散的多个目标进行准确的探测定位,提出了一种新的超声波智能探测方法.采用3个收发一体的超声换能器阵列发送近似的平面声波波束,并建立空间坐标系.3个探头定时发送超声波脉冲,同时数字信号处理器采集并分析接收到的回波信号,在给定的算法下滤除杂波、识别提取回波首波、二次回波和三次回波等特征信号数据,在正确检测出各路波束的回波时间后,通过计算给出多个被测物体的准确定位.实验采用了杆件物体作为被测对象,对回波信号进行高速数据采集处理后计算出被测目标的坐标值,比较了计算物位与实测物位数据,结果验证了该方法的可行性与正确性.      

ASTROSAT

The ASTROSAT satellite is an Indian National Space Observatory under development in India. Due for launch in 2010, ASTROSAT will carry a complement of five scientific instruments enabling simultaneous observations from the optical through to the hard X-ray energy band. This capability will enable broad-band spectroscopy and high time-resolution monitoring of both galactic and extra-galactic targets, such as X-ray binaries and AGN. One of the instruments is being built in collaboration with the Canadian Space Agency and another in collaboration with the University of Leicester. ASTROSAT also carries a scanning sky monitor to observe the variable X-ray sky. After an initial period of science verification and guaranteed time, a certain fraction of ASTROSAT observing time will also be made available to the community via a call for proposals. Here I summarise the instrument complement and principle scientific objectives of the mission.     

Non-stationarity and cross-correlation effects in the MHD solar activity

The analysis of turbulent processes in sunspots and pores which are self-organizing long-lived magnetic structures is a complicated and not yet solved problem. The present work focuses on studying such magneto-hydrodynamic (MHD) formations on the basis of flicker-noise spectroscopy using a new method of multi-parametric analysis. The non-stationarity and cross-correlation effects taking place in solar activity dynamics are considered. The calculated maximum values of non-stationarity factor may become precursors of significant restructuring in solar magnetic activity. The introduced cross-correlation functions enable us to judge synchronization effects between the signals of various solar activity indicators registered simultaneously.     

Simulating planetary wave propagation to the upper atmosphere during stratospheric warming events at different mountain wave scenarios

Parameterization schemes of atmospheric normal modes (NMs) and orographic gravity waves (OGWs) have been implemented into the mechanistic Middle and Upper Atmosphere Model (MUAM) simulating atmospheric general circulation. Based on the 12-members ensemble of runs with the MUAM, a composite of the stratospheric warming (SW) has been constructed using the UK Met Office data as the lower boundary conditions. The simulation results show that OGW amplitudes increase at altitudes above 30 km in the Northern Hemisphere after the SW event. At altitudes of about 50 km, OGWs have largest amplitudes over North American and European mountain systems before and during the composite SW, and over Himalayas after the SW. Simulations demonstrate substantial (up to 50–70%) variations of amplitudes of stationary planetary waves (PWs) during and after the SW in the mesosphere-lower thermosphere of the Northern Hemisphere. Westward travelling NMs have amplitude maxima not only in the Northern, but also in the Southern Hemisphere, where these modes have waveguides in the middle and upper atmosphere. Simulated variations of PW and NM amplitudes correspond to changes in the mean zonal wind, EP-fluxes and wave refractive index at different phases of the composite SW events. Inclusion of the parameterization of OGW effects leads to decreases in amplitudes (up to 15%) of almost all SPWs before and after the SW event and their increase (up to 40–60%) after the SW in the stratosphere and mesosphere at middle and high northern latitudes. It is suggested that observed changes in NM amplitudes in the Southern Hemisphere during SW could be caused by divergence of increased southward EP-flux. This EP-flux increases due to OGW drag before SW and extends into the Southern Hemisphere.     

Near-infrared study of open clusters Teutsch 10 and Teutsch 25

The astrophysical parameters have been estimated for two unstudied open star clusters Teutsch 10 and Teutsch 25 using the Two Micron All Sky Survey ($2\mathit{MASS}$) database. Radius is estimated as 4.5 arcmin for both clusters using radial density profiles. We have estimated proper motion values in both RA and DEC directions as $2.28\pm 0.3$ and $-0.38\pm 0.11$?mas?yr^?1 for Teutsch 10 and $0.48\pm 0.3$ and $3.35\pm 0.16$?mas?yr^?1 for Teutsch 25 using $\mathit{PPMXL}$¹ catalog. By estimating the stellar membership probabilities, we have identified 30 and 28 most likely members for Teutsch 10 and Teutsch 25 respectively. We have estimated the reddening as $E(B-V)=0.96\pm 0.3$?mag for Teutsch 10 and $0.58\pm 0.2$?mag for Teutsch 25, while the corresponding distances are $2.4\pm 0.2$ and $1.9\pm 0.1$?kpc. Ages of $70\pm 10$?Myr for Teutsch 10 and $900\pm 100$?Myr for Teutsch 25 are estimated using the theoretical isochrones of metallicity Z?=?0.019. The mass function slopes are derived as $1.23\pm 0.30$ and $1.09\pm 0.35$ for Teutsch 10 and Teutsch 25 respectively. Estimated mass function slope for both the clusters are close to the Salpeter value ($x=1.35$) within the errors. Estimated values of dynamical relaxation time are found to be less than cluster’s age for these objects. This concludes that both objects are dynamically relaxed. The possible reason for relaxation may be due to dynamical evolution or imprint of star formation or both.     

Evaluation of SARAL/AltiKa performance using GNSS/IMU equipped buoy in Sajafi,Imam Hassan and Kangan Ports

Performance of SARAL/AltiKa mission has been evaluated within 2016 altimeter calibration/validation framework in Persian Gulf through three campaigns conducted in the offshore waters of Sajafi, Imam Hassan and Kangan Ports, while the altimeter overflew the passes 470, 111 and 25 on 13 Feb, 7 March and 17 June 2016, respectively. As the preparation, a lightweight buoy was equipped with a GNSS receiver/choke-ring antenna and a MEMS-based IMU to measure independent datasets in the field operations. To obtain accurate sea surface height (SSH) time series, the offset of the onboard antenna from the equilibrium sea level was predetermined through surveying operations as the buoy was deploying in the onshore waters of Kangan Port. Accordingly, the double-difference carrier phase observations have been processed via the Bernese GPS Software v. 5.0 so as to provide the GNSS-derived time series at the comparison points of the calibration campaigns, once the disturbing effects due to the platform tilt and heave have been eliminated. Owing to comparing of the SSH time series and the associating altimetry 1?Hz GDR-T datasets, the calibration/validation of the SARAL/AltiKa has been performed in the both cases of radiometer and ECMWF wet troposphere corrections so as to identify potential land contamination. An agreement of the present findings in comparison with those attained in other international calibrations sites confirms the promising feasibility of Persian Gulf as a new dedicated site for calibration/validation of ongoing and future altimetry missions.     

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.     

Application of small-size antennas for estimation of angles of arrival of HF signals scattered by ionospheric irregularities

A modification of the Doppler Interferometry Technique is suggested to enable estimating angles of arrival of comparatively broadband HF signals scattered by random irregularities of the ionospheric plasma with the use of small-size weakly directional antennas. The technique is based on the measurements of cross-spectra phases of the probe radiation recorded at least in three spatially separated points. The developed algorithm has been used to investigate the angular and frequency-time characteristics of HF signals propagating at frequencies above the maximum usable one (MUF) for the direct radio path Moscow-Kharkiv. The received signal spectra show presence of three families of spatial components attributed, respectively, to scattering by plasma irregularities near the middle point of the radio path, ground backscatter signals and scattering of the sounding signals by the intense plasma turbulence associated with auroral activations. It has been shown that the regions responsible for the formation of the third family components are located well inside the auroral oval. The drift velocity and direction of the auroral ionosphere plasma have been determined. The obtained estimates are consistent with the classical conception of the ionospheric plasma convection at high latitudes and do not contradict the results of investigations of the auroral ionosphere dynamics using the SuperDARN network.