BDS-3 PPP模糊度固定实现及精度评估

精密单点定位(PPP)模糊度固定(AR)能够显著提升精密定位的收敛速度和精度。通过在BDS-2和BDS-3之间添加系统间偏差的方法实现BDS-3的模糊度固定,并基于全球MGEX测站静态、仿动态数据和车载实验数据全面评估了BDS-3模糊度固定的效果。结果表明,相对于浮点解,BDS-3 PPP模糊度固定能够显著提升PPP的精度,在东北天3个方向上静态解算精度提升依次为37.4%、26.2%和20.1%;仿动态解算精度提升依次为38.3%、27.2%和11.1%;车载动态实验BDS-3模糊度固定精度在三维方向上综合提升为40.4%。此外,模糊度固定后,以浮点解稳定后的两倍定位精度为基准,在东北天方向上,静态定位时间提升程度依次为63.5%、64.0%和40.3%;仿动态定位时间提升程度依次为58.7%、56.8%和25.4%;车载实验在三维方向的收敛时间为30.0 min。以上结果证明了所提方法的有效性及BDS-3模糊度固定的性能提升。     

室内定位技术与应用综述

近年来,随着基于位置服务日益增大的需求,以及基于卫星定位的全球导航卫星系统(GNSS)无法在室内定位的问题,针对复杂室内场景的室内定位技术发展迅速,逐步在各行各业中发挥作用,从各个方面影响着人们的日常生活。首先对目前主流的室内定位技术分类体系、定位原理和方法进行了详细介绍,然后对国内外室内定位技术的研究现状进行了分析和对比,最后对室内定位技术的应用和难点进行了总结。     

国内外深空探测器精密定轨软件研究综述及WUDOGS简介

深空探测器精密定轨软件系统的研制在深空探测活动中是一个非常重要的环节,一直受到各大航天机构的重视。针对国内外深空探测器精密定轨软件平台的研究现状,重点介绍了具有代表性的美国JPL(Jet Propulsion Laboratory,喷气推进实验室)的DPTRAJ/ODP(Double Precision TRAJectory program/Orbit Determination Program,双精度轨道程序/定轨程序)和MONTE(Mission analysis,Operations,and Navigation Toolkit Environment,任务分析、操作和导航工具箱环境),GSFC(Goddard Space Flight Center,戈达德航天飞行中心)的GEODYN-II以及法国CNES(Centre National dEtudes Spatiales,国家空间研究中心)的GINS(Géodésie par Intégrations Numériques Simultanées,同步数值积分大地测量)软件系统,对这些软件的结构与功能进行了总结。之后对武汉大学自主研制的深空探测器精密定轨软件系统WUDOGS(Wuhan University Deep space Orbit determination and Gravity recovery System,武汉大学深空探测器精密定轨与重力场解算软件系统)的主要模块与功能进行了介绍,通过与GEODYN-II的交叉对比验证,表明:对于探测器的轨道预报,WUDOGS与GEODYN-II的1个月位置差异小于0.3mm,2d位置差值小于5×10~(-3) mm;双程测距、双程测速的理论计算值和GEODYN-II的差值RMS(Root Mean Square,均方根)分别在0.06mm,0.002mm/s的水平;WUDOGS目前已初步具备了月球和火星探测器精密定轨能力。最后对WUDOGS的下一步发展方向进行了展望。     

“北斗+5G”联合定位与误差校正技术

在边坡、城市峡谷、高架等复杂的公路交通定位环境中,存在海量多样的定位需求与复杂的定位环境,北斗信号穿越建筑空间时强度被削弱,产生严重的信号反射和衍射,使得北斗卫星信号难以到达和有效使用,系统可用率下降,无法提供可靠的定位服务。结合第五代移动通信网络（5G）系统高密度部署的特点,提出了一种北斗+5G联合定位模型以及基于最小二乘残差Helmert后验加权的误差校正方法。在复杂公路交通环境中,可以改善可见卫星数少的问题,优化卫星的几何构型,提高用户终端定位精度,能够为用户终端提供高精度、全天候、连续、实时的定位服务。实验表明,北斗+5G联合定位模型能够大幅提升复杂公路交通环境下的定位性能。     

北斗三号系统PPP-B2b信号定位服务模型及性能分析

给出了PPP-B2b信号定位的观测模型和随机模型,详细阐述了PPP-B2b增强改正模型和参数估计模型,并进行了静态和动态定位实验。结果表明：对于单系统,在30min的收敛时间内,北斗三号定位精度可以达到水平0.118m(静态)、0.176m(动态),高程0.208m(静态)、0.423m(动态)以内,GPS定位精度可以达到水平0.113m(静态)、0.163m(动态),高程0.206m(静态)、0.377m(动态)以内;对于北斗三号/GPS双系统,在20min的收敛时间内,定位精度可以达到水平0.092m(静态)、0.122m(动态),高程0.158m(静态)、0.312m(动态)以内。无论是收敛性还是定位精度,均能满足北斗三号精密单点定位服务指标的要求。     

高动态信号模拟器中的多普勒模拟算法

 为了测试卫星定位系统接收机的性能,须用信号模拟器来模拟各种条件下真实的卫星发射信号。卫星信号模拟器由软件、硬件和上位机三部分组成。系统主要包含目标运动轨迹计算、误差计算、导航电文生成及信号调制发射等功能模块。中频信号处理中的多普勒频移模拟是高动态卫星信号模拟器要解决的一项关键技术。为此,提出了一种全相参的多普勒模拟算法,基于真实的高动态运动模型解算出伪码和载波的频率字,在现场可编程门阵列（FPGA）中通过数控振荡器(NCO)设计产生真实的动态卫星信号。通过实际测试并与理论数据进行了比对验证,模拟出的动态特性与真实卫星信号的多普勒特性一致。     

一种具有复合侦察定位功能的雷达对抗系统

复合侦察定位系统是采用有源/无源多手段侦察、定位技术,集情报、监视、侦察、干扰、定位多种功能于一体的新型雷达对抗装备.重点讨论了该系统的功能、结构、工作原理及数据融合处理等问题,并对其在作战、训练方面的应用进行了分析探讨.     

Analysis of GNSS clock prediction performance with different interrupt intervals and application to real-time kinematic precise point positioning

Continuous and timely real-time satellite orbit and clock products are mandatory for real-time precise point positioning (RT-PPP). Real-time high-precision satellite orbit and clock products should be predicted within a short time in case of communication delay or connection breakdown in practical applications. For prediction, historical data describing the characteristics of the real-time orbit and clock can be used as the basis for performing the prediction. When historical data are scarce, it is difficult for many existing models to perform precise predictions. In this paper, a linear regression model is used to predict clock products. Seven-day GeoForschungsZentrum (GFZ) final clock products sampled at 30 s are used to analyze the characteristics of GNSS clocks. It is shown that the linear regression model can be used as the prediction model for the satellite clock products. In addition, the accuracy of the clock prediction for different satellites are analyzed using historical data with different periods (such as 2 and 10 epochs). Experimental results show that the accuracy of the clock with the linear regression prediction model using historical data with 10 epochs is 1.0 ns within 900 s. This is higher accuracy than that achieved using historical data of 2 epochs. Finally, the performance analysis for real-time kinematic precise point positioning (PPP) is provided using GFZ final clock prediction results and state space representation (SSR) clock prediction results when communication delay or connection breakdown occur. Experimental results show that the positioning accuracy without prediction is better than that with prediction in general, whether using the final clock product or the SSR clock product. For the final clock product, the positioning accuracy in the north (N), east (E), and up (U) directions is better than 10.0 cm with all visible GNSS satellites with prediction. In comparison, the 3D positioning accuracy of N, E, and U directions with visible GNSS satellites whose prediction accuracy is better than 0.1 ns using historical data of 10 epochs is improved from 15.0 cm to 7.0 cm. For the SSR clock product, the positioning accuracy of N, E, and U directions is better than 12.0 cm with visible GNSS satellites with prediction. In comparison, the 3D positioning accuracy of N, E, and U directions with visible GNSS satellites whose prediction accuracy is better than 0.1 ns using historical data of 10 epochs is improved from 12.0 cm to 9.0 cm.     

基于低轨稀疏星座的蓝绿激光对潜定位研究

潜艇只在必要时刻才浮出水面，对实时通信和导航定位造成极大制约。蓝绿激光具有深水穿透性高、衰减系数低等优势，已在机载和星载平台对潜艇通信中得到验证。借鉴GNSS导航信号产生原理，结合蓝绿激光通信测距一体化与低轨卫星自身精密定轨，提出了基于蓝绿激光通信的低轨卫星对潜定位算法。通过在激光通信中增加载波相位调制，实现潜艇激光接收器的伪距测量，联合其高程测量信息实现水下定位。以一带一路海域，特别是中国南海区域为服务对象，优化星座参数设计了3颗卫星组成的低轨稀疏星座。潜艇在星座覆盖区域内保持静态，间隔1~3min完成至少两次通信测距和导航电文接收，联合两组观测数据、精密星历及高程测量信息进行定位解算。仿真结果显示，在卫星过境期间，考虑卫星定轨精度，激光在空气、水下传播误差等因素，潜艇可在水下实现X、Z方向定位误差优于100m，Y方向误差约100~150m的高精度定位，对提升潜艇的战场作战能力具有意义。     

Correction model of BDS satellite-induced code bias and its impact on precise point positioning

There are code biases on the pseudo-range observations of the Beidou Navigation Satellite System (BDS) that range in size from several decimeters to larger than one meter. These biases can be divided into two categories, which are the code biases in the pseudo-range observations of Inclined Geo-Synchronous Orbit (IGSO) satellites and Medium Earth Orbit (MEO) satellites and the code biases in the pseudo-range observations of Geosynchronous Earth Orbit (GEO) satellites. In view of the code bias of the IGSO/MEO satellites, the code bias correction model is established using the weighted least square curve fitting method. After the correction, the code biases of the IGSO and MEO satellites are clearly mitigated. A methodology of correcting GEO code bias is proposed based on the empirical mode decomposition (EMD)-wavelet transform (WT) coupled model. The accuracies of the GEO multipath combination of the B1, B2 and B3 frequencies are improved by 39.9%, 17.9%, and 29.4%, respectively. Based on the corrections above, the ten days observations of three Multi-GNSS Experiment (MGEX) stations are processed. The results indicate that the convergence time of the precise point positioning (PPP) can be improved remarkably by applying a code bias. The mean convergence time can be improved by 14.67% after the IGSO/MEO code bias correction. By applying the GEO code bias, the mean convergence time can be further improved by 17.42%.