基于工业机器人的机身系统件定位方法研究

针对传统系统件安装工艺采用固定式定位工装导致装配系统开敞性差、柔性程度低的问题,提出了基于工业机器人的机身系统件定位方法,确定了系统件辅助定位工装的标定方法,基于奇异值分解法和位姿等价变换原理确定了工业机器人的位姿调整算法,最后通过系统件辅助定位工装定位试验得出了系统件的定位精度。     

一种适用于曲面结构的机器人制孔误差在线补偿技术

针对工业机器人应用于飞机零部件自动钻孔时各项误差累积造成制孔精度差的问题，提出一种利用单应关系计算机器人驱动坐标三维偏差，以在线补偿机器人制孔精度的方法。首先利用外部测量设备建立机器人制孔系统中各坐标系关系；在标定阶段，通过以一定倾斜角度固联于机器人末端的相机拍摄一幅安装于制孔工作平面上与刀轴正对的平面标定板图像，并据此完成基于单应变换的手-眼关系标定；在实际制孔过程中，机器人在测距传感器及相机的辅助下，从基准孔理论坐标对应的姿态，不断调整至基准孔正上方理想位置，通过手-眼关系计算基准孔实际位置对应的机器人驱动坐标，然后根据一组基准孔的机器人三维驱动误差，计算三维驱动误差变换矩阵，据此获得这组基准孔邻域范围内各待钻孔的机器人驱动坐标补偿量，从而实现待钻孔定位误差补偿。以飞机结构实验件为对象进行了模拟制孔验证，实验结果表明，补偿前待钻孔三维综合定位误差和法向误差测量值范围分别为2.28~2.85 mm和2.09°~3.93°，平均为2.55 mm和3.30°，补偿后制孔最大误差分别不超过0.30 mm和0.21°，满足自动制孔位置精度要求。     

Displacement monitoring performance of relative positioning and Precise Point Positioning (PPP) methods using simulation apparatus

Besides the classical geodetic methods, GPS (Global Positioning System) based positioning methods are widely used for monitoring crustal, structural, ground etc., deformations in recent years. Currently, two main GPS positioning methods are used: Relative and Precise Point Positioning (PPP) methods. It is crucial to know which amount of displacement can be detected with these two methods in order to inform their usability according to the types of deformation. Therefore, this study conducted to investigate horizontal and vertical displacement monitoring performance and capability of determining the direction of displacements of both methods using a developed displacement simulator apparatus. For this purpose, 20 simulated displacement tests were handled. Besides the 24?h data sets, 12?h, 8?h, 4?h and 2?h subsets were considered to examine the influence of short time spans. Each data sets were processed using GAMIT/GLOBK and GIPSY/OASIS scientific software for relative and PPP applications respectively and derived displacements were compared to the simulated (true) displacements. Then statistical significance test was applied. Results of the experiment show that using 24?h data sets, relative method can determine up to 6.0?mm horizontal displacement and 12.3?mm vertical displacement, while PPP method can detect 8.1?mm and 19.2?mm displacements in horizontal and vertical directions respectively. Minimum detected displacements are found to grow larger as time spans are shortened.     

Preliminary analysis of the quality and positioning performance of BDS-3 global interoperable signal B1C&B2a

BeiDou-3 Navigation Satellite System (BDS-3) satellites are equipped with the new generation GNSS signals B1C and B2a, which support the interoperability with GPS and Galileo systems. In this study, the pseudo-range multipath error and carrier phase observation noise of the BDS-3 B1C and B2a signals were evaluated based on zero baseline measurements from the day of year (DOY) 113 to 116, 2020. Further, the precision and performance of the single point positioning (SPP) and precise point positioning (PPP) are assessed at 9 stations. This assessment manifests that the standard deviations (STDs) of the pseudo-range multipath error are about 0.09 ~ 0.22 m, while STDs of the carrier phase observation noise are about 0.075 mm. For the single-frequency SPP, its positioning precision is about 2.03 ~ 4.85 m and 3.29 ~ 10.73 m at the 99.99% confidence level in horizontal and vertical directions, respectively, while the dual-frequency SPP precision is about 1.92 ~ 8.02 m and 4.81 ~ 12.77 m in horizontal and vertical directions, respectively. For the daily static PPP, the convergence time is about 20 ~ 30 min, while the daily positioning precision can reach 1.38 ~ 4.42 cm and -1.31 ~ 4.34 cm in horizontal and vertical directions, respectively. In general, the quality and the SPP and PPP performance of the BDS-3 B1C&B2a signals are comparable to the GPS and Galileo.     

Didactic satellite based on Android platform for space operation demonstration and development

Space technology plays a pivotal role in society development. It offers new methods for telemetry, monitoring and control. However, this sector requires training, research and skills development but the lack of instruments, materials and budgets affects the ambiguity to understand satellite technology. The objective of this paper is to describe a demonstration prototype of a smart phone device for space operations study. Therefore, the first task was carried out to give a demonstration for spatial imagery and attitude determination missions through a wireless communication. The smart phone’s Bluetooth was used to achieve this goal inclusive of a new method to enable real time transmission. In addition, an algorithm around a quaternion based Kalman filter was included in order to detect the reliability of the prototype's orientation. The second task was carried out to provide a demonstration for the attitude control mission using the smart phone’s orientation sensor, including a new method for an autonomous guided mode. As a result, the acquisition platform showed real time measurement with good accuracy for orientation detection and image transmission. In addition, the prototype kept the balance during the demonstration based on the attitude control method.     

四元数UKF超紧密组合导航滤波方法

针对GPS/SINS(Global Positioning System/Strapdown Inertial Navigation Sys-tem)超紧密组合导航系统线性化滤波在高动态、弱GPS信号等环境下性能下降严重的问题,提出了一种以四元数UKF(Unscented Kalman Filter)为基础的GPS/SINS超紧密组合导航系统非线性滤波方法.通过分析GPS与SINS在超紧密组合导航系统中的关系,提出了一种利用SINS信息来估计、修正GPS载波信号的方法,在此基础上建立了组合导航滤波的状态方程和量测方程;以四元数乘性误差模型为基础,提出了一种可应用于UKF滤波的求解四元数加权均值的方法;提出了基于四元数UKF的GPS/SINS超紧密组合导航滤波方法.仿真实验表明:在高动态环境下,四元数UKF滤波方法增强了GPS/SINS超紧密组合导航系统的定位精度和抗干扰能力.     

Phase Residual Estimations for PCVs of Spaceborne GPS Receiver Antenna and Their Impacts on Precise Orbit Determination of GRACE Satellites

In-flight phase center systematic errors of global positioning system(GPS) receiver antenna are the main restriction for improving the precision of precise orbit determination using dual-frequency GPS.Residual approach is one of the valid methods for in-flight calibration of GPS receiver antenna phase center variations(PCVs) from ground calibration.In this paper,followed by the correction model of spaceborne GPS receiver antenna phase center,ionosphere-free PCVs can be directly estimated by ionosphere-free carrier phase post-fit residuals of reduced dynamic orbit determination.By the data processing of gravity recovery and climate experiment(GRACE) satellites,the following conclusions are drawn.Firstly,the distributions of ionosphere-free carrier phase post-fit residuals from different periods have the similar systematic characteristics.Secondly,simulations show that the influence of phase residual estimations for ionosphere-free PCVs on orbit determination can reach the centimeter level.Finally,it is shown by in-flight data processing that phase residual estimations of current period could not only be used for the calibration for GPS receiver antenna phase center of foretime and current period,but also be used for the forecast of ionosphere-free PCVs in future period,and the accuracy of orbit determination can be well improved.     

一种改进的GNSS整周模糊度解相关算法

GNSS整周模糊度解相关算法的性能直接影响到整周模糊度的搜索速度和解算成功率。为了在不降低GNSS整周模糊度解相关算法解相关程度的前提下,提高解相关算法的计算效率,在深入分析典型解相关方法优缺点的基础上,提出基于对角线预排算的解相关算法。该方法源于对直接对角线排序解相关算法的预排序思想,采用矩阵分解后对角线元素中最小值并将其转换到对应对角线位置的方式,用更少的迭代次数达到比直接对角线排序更好的解相关效果。将新算法与其他算法进行仿真比较得出,其性能优于直接对角线排序算法,解相关功能与联合解相关算法等效,且计算效率略占优势。     

基于多相关器的GPS信号质量监测技术

导航卫星的信号质量是影响系统定位性能的一个关键因素,当卫星自身硬件设备或空间传播信号受到干扰时,会导致卫星信号波形失真,用户接收机的伪码相关器产生的相关峰会产生偏差,造成定位精度下降;情况严重时,会使用户失去定位能力。因此,通过对空间信号的监测可以进一步保障系统的服务性能。文中借鉴现有的信号质量监测技术,对GPS信号失真的原因进行了总结,按照TMA、TMB和TMC完成失真信号的建模,并定性分析了对测距的影响。给出基于多相关器的导航信号质量监测方法,使用上述三种模型验证了该判定方法的有效性。     

火星车绝对定位方法选择

针对火星巡视探测任务,提出3种火星车绝对定位方法:无线电测控定位、图像匹配定位、位置圆定位。无线电测控方法首先确定环绕器的轨道,然后利用环绕器和火星车的器间通信定位确定火星车的绝对位置;图像匹配方法利用着陆过程中的降落图像与带地理信息的着陆区地形图进行匹配,实现火星车的位置确定;位置圆方法通过敏感器在多个时刻测量阳光矢量方向和重力矢量方向,结合星历信息求解火星车的位置。对3种方法进行分析比较,根据定位精度、使用约束等因素,给出在轨使用建议:位置圆定位为基本方法,无线电测控定位作为校验手段,图像匹配定位作为修正手段,以满足火星车快速、高精度的定位需求。