不同温度和应变速率下7022铝合金流变应力行为

通过在293-773 K的温度范围内和应变速率为0.001-0.1 s-1下对7022铝合金薄板进行温拉伸试验,研究了7022铝合金温拉伸性能,以及该合金在升温条件下流变应力与变形温度和应变速率之间的关系.并利用改进了的Hooke law和Grosman方程建立了7022铝合金在温拉伸时应力-应变本构模型.研究结果表明:7022铝合金的流变应力随温度的升高而降低,随应变速率的升高而升高;温拉伸试样的延伸率随变形温度的升高而升高,随应变速率的增大而减小.     

薄膜电阻温度计原理性误差分析及数据处理方法研究

薄膜电阻温度计是高超声速测热试验中一种常用的传感器,多用于激波风洞中.改进薄膜电阻温度计测热数据的后处理方法,分析其原理性误差,提出修正方法,可以进一步提高热流测量精度,为防热设计提供可靠数据.应用三维热传导理论,考虑热流和温升的耦合影响,计算了气动加热条件下薄膜电阻温度计结构温升情况,得到了铂层内的温度分布规律,并与一维半无限简化理论得到的薄膜电阻温度计表层温度相互对比,得到了模型简化带来的原理性误差;建立了由表面温升计算表面热流的导热反问题计算方法,与经典的Cook-Felderman处理公式和热电模拟网络处理方法相互对比,提出了修止热流值的方法,为提高热流测量精度提供了一种可行的手段.     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Tear Resistance of Orthogonal Kevlar-PWF-reinforced TPU Film

This work seeks to investigate the notch sensitivity and fracture behaviour of orthogonal Kevlar-plain woven fabric (PWF)-reinforced thermoplastic polyurethanes (TPU) film applied to high altitude balloon. Four types of specimens are implemented to measure notched strength and fracture toughness by conducting static tension and tear tests on an MTS system respectively. The damage and failure mechanisms are discussed and the results for notched strength and tear resistance are evaluated and compared with each other. From the experiments, it is found that the notch sensitivity of the film increases with the increase in the size of the hole, but the notch sensitivity and the stress concentration of the notch are insignificant and there is a decrease of only about 4%-10% in tensile strength for the notched specimens with different hole sizes in diameter compared with the unnotched specimen. In contrast, the tear resistance containing a central slit with only 1 mm length is about half of tensile strength of the unnotched film, which implies that the tear resistance exists an significant notch sensitivity. The results of this study provide an insight into notch sensitivity and fracture behaviour of the Kevlar-PWF-reinforced TPU film and constitute a fundamental basis for the design of high altitude balloon.     

用衰减全反射(ATR)研究金属薄膜的物理性质

本文作者所设计的实验是利用光学中全反射衰减特性方法测量在介质上蒸镀的金属薄膜的厚度和各种频率下的复介电常数等物理性质,它可以精确测定１００～１０００范围内金属膜层的厚度和ε（ω）值,以及一些其它性质,是研究固体表面物理的一种有效的方法和技术。     

碳敷层光纤在碳纤维复合材料智能结构中的应用

在碳纤维复合材料结构的固化过程中,埋入其中的光纤将承受恶劣的环境,这将使光纤的光学性能发生变化,从而影响碳纤维智能复合材料结构中光纤传感系统的性能。文中对多种光纤进行了试验研究,在碳纤维复合材料固化过程中,发现普通敷层光纤的性能发生变化,而央敷层光纤的性能不会发生变化,并对这些现象的原因进行了初步讨论,从而为在碳纤维复合材料智能结构中光纤的选择提供了一定的依据。     

H_3PO_4 C_6H_(11)NaO_7体系中钛合金阳极氧化着色工艺研究

作者在H3PO4 C6 H1 1 NaO7体系中对TC10、TC3、TC1、TA2阳极氧化均能得到丰富色彩。研究表明 ,钛材的成分、电压、pH值、升压方式、氧化时间等对阳极氧化膜的颜色都有一定的影响 ,电压是影响氧化膜颜色的主要因素。此外 ,稀土元素铈和双氧水的加入能提高膜层的耐蚀性。     

裂纹端塑性区修正公式的改进

本文讨论在小范围屈服条件下裂纹尖端塑性区的修正，指出了Irwin经典模型的不足并对其进行了改进，给出了考虑材料强化效应并采用裂纹尖端应力场精确解后的裂尖塑性区大小计算公式。通过改进后的结果与Irwin经典模型结果的比较，表明本工作使Irwin模型更为合理的准确。     

地球同步轨道薄膜太阳帆的姿态轨道控制方法

薄膜太阳帆（FSS）是集推进、发电和姿轨控功能于一体化的超大型挠性太阳帆式航天器,通过调整薄膜反射率产生可变推力和力矩,实现其姿态和轨道运动控制。结合薄膜太阳帆在地球同步轨道运行时的受力特性进行了轨道漂移分析。通过建立薄膜太阳帆动力学模型及受力模型,提出了调整帆面角度轨道修正方法以及基于薄膜光压力矩角动量卸载的长期在轨对日定向面内双轴动量轮稳定控制方法。通过系统仿真验证表明所提的轨道修正和对日定向控制方法是合理有效的,可使薄膜太阳帆长期在定点位置维持对日定向。