阳极层霍尔推力器的阳极分段形式对内磁极刻蚀速率的影响

由于推力器内径向电势和等离子体的分布会影响轰击推力器器壁离子的运动,本文通过阳极的不同分段形式来改变推力器内电势分布,进而研究推力器阳极的不同分段形式对内磁极的刻蚀速率分布。首先利用PIC方法研究入射离子的数量和能量分布,接着对内磁极内表面和上表面的刻蚀速率进行仿真计算。由结果可知：入射到内磁极两个面上的离子数量和能量,都是在三分段阳极时达到最大值,其他三种情况偏低。对于内磁极内表面和上表面的刻蚀速率也是在三分段阳极时最大,其次是单阳极,而二、四分段阳极时的刻蚀速率最小。最后通过单阳极和二分段阳极时刻蚀速率的试验结果对比,验证了此研究结果的正确性,为下一步提高推力器的寿命研究提供了参考数据和研究方法。     

Strong interactions of incident shock wave with boundary layer along compression corner

The coherent structure and instability of the interaction of incident shock wave with boundary layer developing on a compression corner are experimentally studied. The experiments are carried out in a supersonic wind tunnel of Mach number 2. Particular attention is paid to shock patterns and unsteady shock motions induced by the separation bubble. The high-speed schlieren is used to visualize the flowfield evolution and to characterize the instability. The snapshot proper orthogonal decomposition of schlieren sequences is applied to investigate the primary coherent structure in the flowfield. Fast Fourier transform and continuous wavelet transformation are applied to characterize the instability. The results show that there are large-scale low-frequency oscillations of the shock waves and small-scale high-frequency pulsations in the separation region. The peak frequency of shock oscillation is mainly concentrated in the range of 100–1000 Hz. The pulsation of the small flow structure in the separation bubble is mainly concentrated above 12.5 kHz. Based on the results of experimental analysis, the preliminary mechanism of the large-scale instability of such interaction is obtained.     

A regional model for the prediction of M(3000)F2 over East Asia

Research on empirical or physical models of ionospheric parameters is one of the important topics in the field of space weather and communication support services. To improve the accuracy of predicting the monthly median ionospheric propagating factor at 3000 km of the F2 layer (identified as M(3000)F2) for high frequency radio wave propagation, a model based on modified orthogonal temporal–spatial functions is proposed. The proposed model has three new characteristics: (1) The solar activity parameters of sunspot number and the 10.7-cm solar radio flux are together introduced into temporal reconstruction. (2) Both the geomagnetic dip and its modified value are chosen as features of the geographical spatial variation for spatial reconstruction. (3) A series of harmonic functions are used to represent the M(3000)F2, which reflects seasonal and solar cycle variations. The proposed model is established by combining nonlinear regression for three characteristics with harmonic analysis by using vertical sounding data over East Asia. Statistical results reveal that M(3000)F2 calculated by the proposed model is consistent with the trend of the monthly median observations. The proposed model is better than the International Reference Ionosphere (IRI) model by comparison between predictions and observations of six station, which illustrates that the proposed model outperforms the IRI model over East Asia. The proposed method can be further expanded for potentially providing more accurate predictions for other ionospheric parameters on the global scale.     

Integrated supersonic wind tunnel nozzle

In supersonic wind tunnels, the airflow at the exit of a convergent-divergent nozzle is affected by the connection between the nozzle and test section, because the connection is a source of disturbance for supersonic flow and the source of disturbance generated by this disturbance propagates downstream. In order to avoid the disturbance, the test can only be carried out in the rhombus area. However, for the supersonic nozzle, the rhombus region is small, limiting the size and attitude angle of the test model. An integrated supersonic nozzle is a nozzle and a test section as a whole, which is designed to weaken or eliminate the disturbance. The inviscid contour of the supersonic nozzle is based on the method of characteristics. A new curve is formed by the smooth connection between the inviscid contour and test section, and the boundary layer is corrected for the overall curve. Integrated supersonic nozzles with Mach number 1.5 and 2 are designed, which are based on this method. The flow field is validated by numerical and experimental results. The results of the study highlight the importance of the connection about the nozzle outlet and test section. They clearly show that the wave system does not exist at the exit of the supersonic nozzle, and the flow field is uniform throughout the test section.     

高超声速有攻角锥飞行工况下迎风面波包的演化

飞行工况下由于壁温与来流温度之比较低，Mack模态的不稳定性会得到显著增强，因此Mack模态占主导的有攻角锥迎风面相对侧面可能会提前转捩。本文采用高分辨率直接数值模拟研究了高超声速有攻角锥在飞行工况下迎风面Mack模态的演化规律，Mack模态由迎风中心线附近的一个短时局部壁面吹吸激发。波包的空间分布和不同模态幅值沿流向的演化过程表明在有攻角条件下，Mack模态的演化过程与零度攻角锥边界层中的类似，基频共振是Mack模态最可能的转捩形式。     

High-temperature tribological behaviors of a Cr-Si co-alloyed layer on TA15 alloy

A Cr-Si co-alloyed layer was successfully deposited on TA15 alloy by the double glow plasma surface technology to improve its poor wear resistance at elevated temperature.The microstructure,composition,and phase structure of the layer were investigated by SEM,EDS,and XRD.The tribological behaviors of the Cr-Si co-alloyed layer at 20 ℃ and 500 ℃ were analyzed in details.The results indicated that the friction coefficient and wear rate of the Cr-Si coalloyed layer at 20 ℃ and 500 ℃ were much lower than those of the substrate,which was due to higher hardness and superior elastic modulus.This layer may become an approach to effectively improving the wear resistance of TA15 alloy at elevated temperature.     

A new SINS/GPS sensor fusion scheme for UAV localization problem using nonlinear SVSF with covariance derivation and an adaptive boundary layer

The state estimation strategy using the smooth variable structure filter(SVSF) is based on the variable structure and sliding mode concepts. As presented in its standard form with a fixed boundary layer limit, the value of the boundary layer width is not precisely known at each step and may be selected based on a priori knowledge. The boundary layer width reflects the level of uncertainty in the model parameters and disturbance characteristics, where large values of the boundary layer width lead to robustness without optimality and small values of the boundary layer width provide optimality with poor robustness. As a solution and to overcome these limitations, an adaptive smoothing boundary layer is required to achieve greater robustness and suitable accuracy.This adapted value of the boundary layer width is obtained by minimizing the trace of the a posteriori covariance matrix. In this paper, the proposed new approach will be considered as another alternative to the extended Kalman filters(EKF), nonlinear H1 and standard SVSF-based data fusion techniques for the autonomous airborne navigation and self-localization problem. This alternative is based on strapdown inertial navigation system(SINS) and GPS data using the nonlinear SVSF with a covariance derivation and adaptive boundary layer width.Furthermore, the full mathematical model of the SINS/GPS navigation system considering the unmanned aerial vehicle(UAV) position, velocity and Euler angle as well as gyro and accelerometer biases will be used in this paper to estimate the airborne position and velocity with better accuracy.     

风雪运动数值模拟中自保持平衡边界条件研究

在目前风场自保持性研究的基础上,结合等效物理粗糙高度,给出一类近似满足自保持性的用于风雪运动数值模拟的边界条件.首先结合低温风洞实验室的风雪实验数据,把文献的方法应用于风雪运动数值模拟中.经对比验算发现,文献的方法应用于风雪数值模拟中不能很好满足自保持性.为了进一步满足自保持性要求,引入等效物理粗糙高度,建立起雪跃移高度与等效物理粗糙高度的关系.结果表明:通过引入等效物理粗糙高度,边界条件的自保持特性得到了进一步的提高.最后对该方法的应用进行了推广验证.     

热电法在表征涡轮叶片渗铝硅层厚度中的应用

选取工作300h的涡轮叶片和新品叶片制作试样,试样提供了不同的渗铝硅层厚度,采用热电法和金相法分别对试样上同一位置进行检查,热电法记录该位置处热电势值,金相法测量该位置截面的渗铝硅层厚度,对一系列实测数据进行分析,得到随渗铝硅层厚度增大热电势值相应减小的变化规律,随后对热电检查的外部影响因素进行了试验分析,并结合部分试样给出热电势值随温度、异物、探头角度等改变带来的误差规律.