薄壁内、外半管冲压成形工艺参数模拟优化设计

针对内、外半管的结构特点,分析计算冲压成形主要工艺参数及毛坯尺寸,运用有限元分析软件ANSYS/LS-DYNA,对内、外半管的成形过程进行了模拟。研究了不同压边力及不同冲压速度对零件拉深成形的影响,分析了零件的成形工艺及其起皱缺陷,优化了毛坯形状,避免了成形过程中的缺陷,获得了理想的毛坯形状和工艺参数。     

基于多核计算机集群系统的网格分区策略

网格分区技术是提高并行计算效率的重要手段。基于图的分区技术(如Metis等)已经可以完全做到负载平衡,但是随着计算机集群系统的发展,节点间的通讯成为并行计算中的重要时间消耗部分。为此,提出一种适用于非结构网格的新分区策略(MC Partition method),减少了节点间的通讯规模,结果表明,这种分区方法可以较大的提高并行计算效率。     

Optimization of entry-vehicle shapes during conceptual design

During the conceptual design of a re-entry vehicle, the vehicle shape and geometry can be varied and its impact on performance can be evaluated. In this study, the shape optimization of two classes of vehicles has been studied: a capsule and a winged vehicle. Their aerodynamic characteristics were analyzed using local-inclination methods, automatically selected per vehicle segment. Entry trajectories down to Mach 3 were calculated assuming trimmed conditions. For the winged vehicle, which has both a body flap and elevons, a guidance algorithm to track a reference heat-rate was used. Multi-objective particle swarm optimization was used to optimize the shape using objectives related to mass, volume and range. The optimizations show a large variation in vehicle performance over the explored parameter space. Areas of very strong non-linearity are observed in the direct neighborhood of the two-dimensional Pareto fronts. This indicates the need for robust exploration of the influence of vehicle shapes on system performance during engineering trade-offs, which are performed during conceptual design. A number of important aspects of the influence of vehicle behavior on the Pareto fronts are observed and discussed. There is a nearly complete convergence to narrow-wing solutions for the winged vehicle. Also, it is found that imposing pitch-stability for the winged vehicle at all angles of attack results in vehicle shapes which require upward control surface deflections during the majority of the entry.     

应用模糊变权的启发式搜索进行飞行轨迹优化

回顾了军机轨迹优化问题的提出及研究历史，介绍了几种主要方法的特点，特别是启发式搜索算法应用于飞行轨迹优化问题时存在的主要问题。提出为了得到较好的近优路径而采取的模糊变权处理方法。通过计算不同加权下解的情况，说明模糊变权方法是使加权随具体情况作相应调整的有效手段，为提高飞行路径规划系统的有效性开辟了一个新思路。     

基于图剖分的多块结构网格负载平衡方法

负载平衡是影响并行计算性能的重要因素。针对多块结构网格,给出了一种改进的多层次图剖分负载平衡方法。该方法设计了新的网格剖分算法,采用改进的子块分裂方法与图剖分算法的循环调用实现结构对接网格剖分,并通过建立不同物体重叠网格间的连接关系,实现了结构重叠网格的负载平衡。采用2个典型算例对方法进行了对比验证,数值结果表明,子块分裂方法对剖分结果具有重要影响,采用循环调用算法及改进的子块分裂方法能有效地实现计算负载均衡及通信量优化,同时显著减少了网格块数及因虚网格导致的内存需求,有利于提高并行效率。该负载平衡方法与网格拓扑无关,适用于多块结构对接网格及重叠网格,且整体型剖分方式对于多块结构重叠网格具有更好的剖分效果。     

Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism

To improve performances of multi-objective optimization algorithms, such as convergence and diversity, a hybridization- encouraged mechanism is proposed and realized in elitist nondominated sorting genetic algorithm （NSGA-Ⅱ）. This mechanism uses the normalized distance to evaluate the difference among genes in a population. Three possible modes of crossover operators--＂Max Distance＂, ＂Min-Max Distance＂, and ＂Neighboring-Max＂--are suggested and analyzed. The mode of ＂Neighboring-Max＂, which not only takes advantage of hybridization but also improves the distribution of the population near Pareto optimal front, is chosen and used in NSGA-Ⅱ on the basis of hybridization-encouraged mechanism （short for HEM-based NSGA-Ⅱ）. To prove the HEM-based algorithm, several problems are studied by using standard NSGA-Ⅱ and the presented method. Different evaluation criteria are also used to judge these algorithms in terms of distribution of solutions, convergence, diversity, and quality of solutions. The numerical results indicate that the application of hybridization-encouraged mechanism could effectively improve the performances of genetic algorithm. Finally, as an example in engineering practices, the presented method is used to design a longitudinal flight control system, which demonstrates the obtainability of a reasonable and correct Pareto front.     

电火花加工计算机辅助工艺过程设计系统

介绍电火花计算机辅助工艺过程设计系统（ＣＡＰＰＳ），用于为一个给定目标选择最佳操作。同时，还考虑了其它的会影响ＥＤＭ加工过程的加工方法（如铣削等）。系统的输入信息是在已有的ＣＡＤ信息的基础上产生的基于ＣＡＰＰ特征的工件描述。每个特征类对应于一个特定的一般工艺规程，并由系统对其进行评价，然后基于最低成本的原则，计算出最优工艺规程。同时还介绍了一种计算工时的通用方法。     

改进PointNetLK的点云智能配准与位姿图优化方法

针对空间在轨服务任务中的非合作目标相对位姿测量问题,提出一种目标可测部位点云的智能配准方法。首先,通过Straight Through滤波算法对半物理仿真平台采集得到的点云进行目标提取,以消除背景数据等杂乱信息;其次,改进PointNetLK神经网络点云配准算法,将提取后的点云数据作为输入,从而获得初步配准结果,解决非合作目标先验信息缺失导致的无法配准问题;最后,建立基于位姿图的优化模型,以降低配准误差,提高配准精度。实验结果表明,与传统迭代最近点(ICP)算法相比,配准综合误差从6.3598降低到1.7291,精度提高约 72.81% 单次耗时从33.16 s降低到4.2 s,效率提升约87.33%,与当前SM ICP等其他算法相比,也具有一定的优势。     

基于高效数值方法的一种高超声速飞行器外形气动力/热综合优化设计研究

基于所发展的高效气动力/热快速预测方法,建立了适用于高超声速飞行器的综合考虑气动力与气动热特性的外形优化设计技术,并在一种高超声速飞行器外形设计中应用,通过优化设计改变了初始外形纵向静不稳定特性,优化后外形实现了纵向静稳定、大攻角自配平和非驻点表面最大热流下降的设计目标。所发展的方法为适应气动外形快速选型设计需求提供了有效的途径。     

基于左手材料的翼面隐身结构设计及优化

翼面隐身结构能同时满足飞行器机翼气动、结构和隐身的要求,但在空间有限的机翼中应用时,由于结构特点使其隐身效果受到限制。为了解决该问题,在传统隐身结构中加入左手材料(LHM)进行改进。首先选取一种典型的LHM,从隐身设计角度出发,利用其雷达散射截面(RCS)计算不同入射角度下的后向吸收率,对其电磁特性进行研究。然后根据LHM的电磁特性,将其应用于翼面隐身结构,在相同的RCS减缩效果下,应用LHM可有效降低隐身结构体积。最后,为了进一步提高隐身效果,提出一种夹芯型LHM翼面隐身结构,并对该隐身结构中的结构参数利用代理模型进行优化。研究结果表明,相较金属翼面段RCS降低了15dB以上,较相同结构的翼面隐身结构RCS降低了10dB以上。