Effect of bristle pack position on the rotordynamic characteristics of brush-labyrinth seals at various operating conditions

Over the last few decades, the research on the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals is not sufficient. To this end, two kinds of brush-labyrinth seals for the bristle pack element installed upstream of the labyrinth teeth named BSU and installed downstream of the labyrinth teeth called BSD were used to investigate the effect of bristle pack position on the rotordynamic characteristics of the brush-labyrinth seals. Using the numerical model combining the porous medium model and the whirling rotor method, the rotordynamic characteristics of the BSU and BSD at various operating conditions including four kinds of pressure ratios, five kinds of inlet preswirl speeds and four kinds of rotor spinning speeds were conducted. The obtained results show that the effects of operating conditions on rotordynamic coefficients for the different seal configurations are different. The direct stiffness, cross-coupled stiffness and direct damping of the BSU are lower than those of the BSD. The rotordynamic coefficients of the BSU are more insensitive to the operating conditions variation. From the perspective of the seal stability, the BSU is a better brush-labyrinth seal configuration at high pressure ratio, high positive preswirl or high rotor spinning speed conditions. While in the case of low pressure ratio, low positive preswirl or low rotor spinning speed conditions, the BSD is a better choice.     

大型冲压翼伞新技术

文中针对大型冲压翼伞发展的两大难题:开伞动力学和收口技术,介绍了两种分析大型冲压翼伞气动力性能的方法——飞行性能模拟法和有限元模拟法,最后介绍了美国先锋公司开发的中幅收口技术。     

翼伞雀降技术

雀降是翼伞的一种重要性能,在本质上是一种小心操纵的动力失速,使回收系统以最小的速度着陆,降低着陆冲击,实现定点着陆。文章简要介绍了翼伞雀降技术的概念、雀降的典型过程和影响雀降性能的主要因素。目前有限元模拟技术已经用于大型冲压翼伞的雀降技术研究中。随着回收载荷和空投物质量的增加,原来用于翼伞雀降的伺服机构已不再适用,各国正在寻找新的动力源或方法来实现自动雀降。     

动力伞结构强度计算

本文分析动力伞结构的受力状态，并对主要承力构件进行了强度及稳定性计算，结果表明结构是安全可靠的。     

某型飞机阻力伞抛放系统故障模式分析

针对某型飞机阻力伞系统放伞、抛伞故障,通过分析系统的组成、工作原理、常见故障模式以及故障原因,提出了改进建议,为该型飞机阻力伞抛放系统故障的排除提供思路。     

Fluid structure interaction simulation of supersonic parachute inflation by an interface tracking method

An Arbitrary Lagrangian–Eulerian (ALE) approach with interface tracking is developed in this paper to simulate the supersonic parachute inflation. A two-way interaction between a nonlinear finite element method and a finite volume method is accomplished. In order to apply this interface tracking method to problems with instantaneous large deformation and self-contact, a new virtual structure contact method is proposed to leave room for the body-fitted mesh between the contact structural surfaces. In addition, the breakpoint due to the fluid mesh with negative volume is losslessly restarted by the conservative interpolation method. Based on this method, fluid and structural dynamic behaviors of a highly folded disk-gap-band parachute are obtained. Numerical results such as maximum Root Mean Square (RMS) drag, general canopy shape and the smallest canopy projected areas in the terminal descent state are in accordance with the wind tunnel test results. This analysis reveals the inflation law of the disk-gap-band parachute and provides a new numerical method for supersonic parachute design.     

降落伞充气过程的数值模拟

 基于降落伞的重要应用与设计的实际需要，降落伞的数值模拟开始得到越来越多的重视，而充气过程是其中最为复杂的一个阶段。本文建立了平面圆形伞主充气过程中的CFD（Computational Fluid Dynamics）与结构动力学的MSD（Mass Spring Damper）之间的耦合模型。流场求解采用稳定性较高的标准k-ε模型，在多块贴体坐标下，获得某时间节点处的流场，并将该流场中的压力数据引入MSD模型，以获得下一时间节点的伞衣形状，最终获得主充气过程中伞衣形状和流场之间的动态关系。数值计算结果和实验结果及经验值比较，均有较好的一致性。充气过程的数值求解有助于提高对降落伞充气过程机理的理解。      

重型货物空投系统过程仿真及特性分析

建立了货物空投系统仿真计算模型,包括货台在舱内和舱外全过程的运动特性、降落伞拉直和充气过程的轨迹特性计算等,提出了伞群模拟和多吊带系统分析的新方法。结合目前已有的降落伞性能计算模型和物伞系统运动模型,对重型货物空投全过程进行了完整计算,开发了空投过程三维动画仿真软件,通过与试验数据的对比,表明本模型能很好地满足应用的需要。分析了空投速度、伞包安装位置和牵引比等因素对空投过程的影响,指出了实际系统的改进方向。     

内置式空中发射运载火箭发射方向研究

对运载器与载机分离过程的几个阶段采用统一模型进行研究,建立了分离过程物伞系统的刚体-质点模型。以此数学模型为基础,对空中发射的分离过程用Matlab/Simulink进行了仿真计算。结果表明,前向发射在分离过程结束时运载器的高度损失和速度损失比后向发射小,性能优于后向发射,对实际工程应用具有重要参考价值。     

基于非接触测量技术的降落伞流场测试方法研究

在开口单回流式风洞试验中,采用由激光器、片光元件、光臂、激光脉冲同步器、CCD摄像机等组成的成像系统获取图像数据,再由帧抓取器和图像分析软件组成的分析与显示系统,获取了几种典型结构的模型伞尾流绕流场特性。试验结果表明,非接触式的粒子图像测速技术应用于降落伞流场测试试验是可行的,测取的数据真实准确;相比它接触性流场测量技术,具有可以全场瞬态的定量测量、仪器对流体干扰少、较高的精度与准确率等优点。