高速大重合度直齿圆柱齿轮的齿廓最佳修形研究

在对高速大重合度圆柱齿轮传动的动力性能进行计算机模拟的基础上,研究了齿廓修形对啮合轮齿间动载荷的影响,提出了确定齿廓最佳修形量的方法     

电子式差定温探测器的研究

阐述了电子式差定温火灾探测器的工作原理,并对该探测器进行了深入的理论研究,提出了按探测器的不同灵敏度要求进行探测器设计的方法。使用所提出的设计方法,进行了原理样机的设计、实现和调试。原理洋机的研制成功,证明了用该设计方法进行电子式差定温探测器设计与调试的简便性、实用性和可靠性。     

非线性气体振荡整流效应在矩形机翼上的应用研究

在对圆管内气体的非线性振荡进行理论和实验研究的基础上,利用开口圆管非线性气体振荡的整流效应,通过流动显示及压力测量,对翼面分离流控制进行实验研究。研究结果表明,翼面开缝引入气体振荡有利于改善大迎角下翼面的压力分布,提高升力,增大机翼的稳定性,同时,不论采取何种开缝模式,这种输入能量的方式对提高其气动性能都有一定作用。     

High Hardware Utilization and Low Memory Block Requirement Decoding of QC-LDPC Codes

This paper presents a simple yet effective decoding for general quasi-cyclic low-density parity-check (QC-LDPC) codes, which not only achieves high hardware utility efficiency (HUE), but also brings about great memory block reduction without any performance degradation. The main idea is to split the check matrix into several row blocks, then to perform the improved message passing computations sequentially block by block. As the decoding algorithm improves, the sequential tie between the two-phase computations is broken, so that the two-phase computations can be overlapped which bring in high HUE. Two overlapping schemes are also presented, each of which suits a different situation. In addition, an efficient memory arrangement scheme is proposed to reduce the great memory block requirement of the LDPC decoder. As an example, for the 0.4 rate LDPC code selected from Chinese Digital TV Terrestrial Broadcasting (DTTB), our decoding saves over 80% memory blocks compared with the conventional decoding, and the decoder achieves 0.97 HUE. Finally, the 0.4 rate LDPC decoder is implemented on an FPGA device EP2S30 (speed grade -5). Using 8 row processing units, the decoder can achieve a maximum net throughput of 28.5 Mbps at 20 iterations.     

Autonomous space target tracking through state estimation techniques via ground-based passive optical telescope

The presence of operational satellites or small-body space debris is a challenge for autonomous ground-based space object observation. Although most space objects exceeding 10?cm in diameter have been cataloged, the position of each space object (based on six orbital parameters) remains important and should be updated periodically, as the Earth’s orbital perturbations cause disturbances. Modern ground-based passive optical telescopes equipped with complementary metal-oxide semiconductors have become widely used in astrometry engineering, being combined with image processing techniques for target signal enhancement. However, the detection and tracking performance of this equipment when employed with image processing techniques primarily depends on the size and brightness of the space target, which appears on the monitor screen under variable background interference conditions. A small and dim target has a highly sensitive tracking error compared to a bright target. Moreover, most image processing techniques for target signal enhancement require large computational power and memory; therefore, automatic tracking of a space target is difficult. The present work investigates autonomous space target detection and tracking to achieve high-sensitivity detection and improved tracking ability for non-Gaussian and dynamic backgrounds with a simple system mechanism and computational efficiency. We develop an improved particle filter (PF) using the ensemble Kalman filter (KF) for track-before-detect (TBD) frameworks, by modifying and optimizing the computational formula for our non-linear measurement function. We call this extended version the “ensemble Kalman PF-TBD (EnKPF-TBD).” Three sequential astronomical image datasets taken by the Asia-Pacific Ground-Based Optical Space Objects Observation System (APOSOS) telescope under different conditions are used to evaluate three proposed TBD baseline frameworks. Given an optimal random sample size, the EnKPF-TBD exhibits superior performance to PF-TBD and threshold-based unscented KF with two-dimensional peak search (2dPS). The EnKPF-TBD scheme achieves satisfactory performance for all variable background interference conditions, especially for a small and dim space target, in terms of tracking accuracy and computational efficiency.     

Study of mid-latitude ionospheric convection during quiet and disturbed periods using the SuperDARN Hokkaido radar

Westward ionospheric convective flows around midnight are frequently observed at mid-latitudes. They can be generated by so-called disturbance dynamo mechanisms working mainly in the mid-latitudes. To understand the influence of disturbance dynamo effects in the mid-latitudes, we studied the latitudinal distribution of westward flows in association with several kinds of geomagnetic disturbances using the SuperDARN Hokkaido radar. This radar creates high temporal resolution (1 s to 2 min), two-dimensional observations measuring the line-of-sight velocities of ionospheric plasma irregularities, which can be regarded as line-of-sight velocities of ionospheric convection in the mid-latitude region from 40° to 50°. This region could not be monitored using preexisting SuperDARN radars. In this study, we used ionospheric echo data obtained by the SuperDARN Hokkaido radar over 5 years (December 2006 to November 2011). We identified westward flows around midnight at about 40° to 55° geomagnetic latitude. Additionally, the data showed that the westward flow around midnight intensified under high geomagnetic activity (high Kp). This suggests that the disturbance dynamo could affect the mid-latitude ionospheric convection. We performed Superposed Epoch Analysis (SEA) to study the influences from the geomagnetic disturbances on mid-latitude ionospheric convection. We found no obvious influence during major storms (minimum Dst below −60 nT). SEA was also used to study the temporal and latitudinal dependence on the influences from substorms. From analysis of 36 events of AL-defined substorms, we saw that the influence of substorms lasted from 5 to 20 h after the onset between 44° and 53° geomagnetic latitude. The westward flow at mid-latitude grew to a maximum at 12 h after the geomagnetic substorm onset. This is consistent with the results of past numerical simulation studies of the disturbance dynamo effects.     

空间辐射环境工程的现状及发展趋势

空间辐射环境是航天器在轨运行所面临的重要环境要素之一,因其诱发的单粒子效应、总剂量效应、位移损伤效应、表面充放电效应、内带电效应等既可引起航天器材料、器件、结构等在轨损伤、性能退化甚至失效,然而又可以利用其开展空间育种等活动。文章从空间辐射环境与模型、空间辐射效应及机理、空间辐射环境与效应试验的评价标准、空间辐射环境效应试验方法、空间辐射环境与效应地面模拟试验设备、空间辐射环境与效应数值模拟、空间辐射环境与效应飞行试验及抗辐射加固技术等角度对空间辐射环境工程的现状进行了评述,进而提出了空间辐射环境工程各个领域的发展趋势。     

一种面向卫星应用的新型存储器和FPGA设计与实现

可靠性对在轨卫星的安全意义重大。由于空间环境辐射和单粒子效应,卫星系统多次发生在轨异常,对在轨卫星系统工作的连续性、稳定性和安全性造成了严重影响。文章针对卫星在轨空间环境和单粒子问题,提出一种基于铁电材料的高可靠、抗辐射的CPU和FPGA解决方案。一方面,设计了和通用接口兼容的新型铁电存储器,其抗辐射总剂量大于10000Krads（Si）,对单粒子效应几乎具有完全的免疫能力;另一方面,设计了基于铁电编程单元的新型FPGA,该FPGA不需要外部PROM,具有很好的经济性和应用前景。     

Modeling on mechanical behavior and damage evolution of single-lap bolted composite interference-fit joints under thermal effects

This paper reports the modeling method and outcomes of mechanical performance and damage evolution of single-lap bolted composite interference-fit joints under extreme temperatures. The anisotropic continuum damage model involving thermal effects is established on continuum damage mechanics which integrates the shear nonlinearity constitutive relations characterized by Romberg-Osgood equation. The temperature-induced modification of thermal strains and material properties is incorporated in stress-strain analysis, extended 3D failure criteria and exponential damage evolution rules. The proposed model is calibrated and employed to simulate behavior of composite joints in interference fitting, bolt preloading, thermal and bearing loading processes, during which the influence of interference-fit sizes, preload levels, laminate layups and service temperatures is thoroughly investigated. The predicated interfacial behavior, bearing response and failure modes are in good agreement with experimental tests. The numerical model is even capable of reflecting some non-intuitive experimental findings such as residual stress relaxation and matrix softening at elevated temperatures.     

Kapton抗原子氧侵蚀的Al2O3涂层研究

在原子氧侵蚀地面模拟设备中对Kapton和利用反应溅射制备的Al2O3涂层进行了原子氧暴露实验，并采用XPS和SEM等分析手段对暴露前后试样表面的物理和化学变化进行了研究。结果表明，Kapton试样遭受了严重的侵蚀，质量损失较大；Al2O3涂层质量变化很小，对基体提供了良好的保护作用。XPS分析结果表明，Kapton的羰基与原子氧作用时形成CO2，随后CO2气体脱附。反应溅射的Al2O3涂层是富Al的，初始暴露时由于氧化反应而质量有少许增加，随时间延长，涂层变得完全符合化学计量。