月球探测器软着陆缓冲机构触月敏感技术

简介了国外月球和火星等探测器软着陆缓冲机构＂触地＂敏感技术与应用,提出了采用冲击加速度检测的探测器软着陆缓冲机构（足垫）触月敏感触发方案,阐述了敏感触发装置的设计思想,分析了探测器软着陆触月过程的动力学响应,论述了触发装置的冲击加速度敏感检测方式与原理以及电路单元设计。该装置比较适合月球探测器软着陆缓冲机构的结构和工作特点,可以满足制导、导航与控制（GNC）主控系统设计要求。     

跨声速风洞斜孔壁非线性流动试验

为分析跨声速风洞斜孔壁近壁区域的流动特性，评估气流偏角-压力系数的非线性关联，在0.6 m跨超声速风洞中开展了基于七孔探针的流动特性测量试验。通过气流偏角和压力系数分布分析了斜孔壁流动的差阻特性，以及马赫数、模型升力对斜孔壁流动的影响，最后基于试验结果发展了计算斜孔壁特性参数的微分法，并与经验方法结果进行对比。结果表明，斜孔壁流动呈现出明显的差阻性和非线性，在负压差范围内，近壁流动仍以出流为主；高亚声速时，空风洞模型区孔壁流动特性趋于实壁；安装模型后，随着升力的增大，升力面对应的孔壁区域流动向入流发展，孔壁流动特性趋于开口边界。     

Design-to-Cost Applied Within an Integrated System Model

In an environment of declining financial budgets for space projects, new approaches - such as Design-To-Cost - are being implemented to improve today's satellite design processes. Using an example of a current mission (the power subsystem of the Solar Probe spacecraft) under study at NASA's Jet Propulsion Laboratory, the main part of the paper discusses an Integrated System Model (structured into a performance model, a cost model, and an effectiveness model) that is part of a model-based design process used to perform cost-effectiveness trades. A simulation tool is used during the first step to size the components of the power subsystem, and then simulate its performance during operation. The determined dimensions are transferred into an EXCEL^TM-spreadsheet and linked to the components' costs. With a cost accounting tool that combines cost estimating relationships with the Work Breakdown Structure of the power subsystem, the life-cycle cost of each alternative design concept is computed. To determine the cost-risk of the different design alternatives for each component, cost probability distributions are introduced. By performing Monte-Carlo simulations, cost sensitivities are revealed. In the next step of the trade study process, the effectiveness of the alternatives is analyzed. Having determined cost and effectiveness, estimates can be made for where the different alternatives lie in the design space. The last part of the paper identifies the main drivers for the spacecraft's performance and cost. Finally it is shown how the mission design benefited from the Integrated System Model and from the application of Design-To-Cost.     

期望状态序列导向的深空探测器规划修复方法

Aiming at the challenges caused by the persistence, concurrency and energy consumption of probe actions, a plan repair method of deep space probe based on the expected state sequence is proposed. In this method, the expected state sequence is formed of the expected effect of the unfinished action and the expected precondition of the unexecuted action in the pre designed plan, according to the execution status of the action. The expected state sequence is an ordered set of states with mixed logic and energy, providing subgoals for plan repair and also transforming the plan repair problem into the state transition path searching problem. During the search, the plan repair strategy with energy supply priority is proposed, which separates the logic repair from energy repair to reduce the difficulty of solving the problem. And this method enables the probe to recover from plan failure autonomously. Finally, the effectiveness and rationality of the proposed method are verified through simulation by taking the Mars Orbiter as an example.     

中国月球探测器的成就与展望

全面而简要地回顾了国内外月球探测的发展历程,介绍了中国月球探测器的工程研制和飞行任务实施情况,总结了中国月球探测器取得的技术成就和科学成果,展望了中国月球探测器的未来发展。     

当量油气比对内燃波转子燃烧特性的影响

为了研究当量油气比对内燃波转子燃烧特性的影响规律,采用控制变量法,保持内燃波转子转速、混气填充速度不变,通过调节燃料喷射体积流量改变混气的当量油气比。在不同的当量油气比下开展内燃波转子燃烧特性试验。试验结果表明:当量油气比对于内燃波转子燃烧过程影响很大,随着当量油气比的增加,内燃波转子获得的燃烧压力增益增大,在内燃波转子转速为900r/min、混气填充速度为6.741m/s、当量油气比为1.442时,6个工作循环内平均燃烧压力增益达到246.29％,火焰平均传播速度随当量油气比呈类似正态分布,在化学恰当比附近达到最大10.8m/s。当量油气比小于1时,两组工况下火焰锋面呈向下倾斜状传播,当量油气比大于1时,两组工况下火焰锋面呈向上倾斜状传播。      

火星探测器降落伞拉直过程中的“绳帆”现象研究

针对火星探测器降落伞在拉直过程中出现的“绳帆”现象,以及火星探测器降落伞开伞前初始参数和大气密度与地球环境下的差异,建立了火星探测器降落伞拉直过程的数学模型,研究了火星环境下,伞包弹射速度、开伞前进入器的攻角、开伞马赫数以及大气密度对“绳帆”现象的影响。研究结果表明,选择较大的伞包弹射速度,并将开伞前进入器的攻角严格限定在较小范围内,将有利于避免或降低“绳帆”现象的发生。这一研究结果可为我国实施火星探测时减速着陆系统的设计分析提供一定参考。     

嫦娥三号探测器连续姿控的轨道动力学模型补偿及实现

针对嫦娥三号探测器的连续姿控喷气对飞行轨道产生的扰动影响,在精密定轨中建立了经验力补偿模型,并使用最小二乘估计算法计算经验力模型参数与探测器轨道。通过重叠弧段轨道精度评估法对该模型补偿效果进行了验证,结果显示,定轨预报的星历误差以及拟合残差均有所改善,特别是环月轨道的定轨精度由百米量级提高到十米量级。     

基于自适应迭代学习的小行星绕飞容错控制

对于小行星绕飞任务的探测器姿态控制问题,已有方法大都考虑了干扰力矩和参数不确定等因素,而忽视了执行器故障情况。针对执行器故障条件下的小行星探测器姿态控制问题,提出了一种基于自适应迭代学习的容错控制方法。所设计的控制器包括两部分：其一针对执行器故障,设计了自适应迭代学习控制器,采用类滑模的思想和自适应迭代学习算法对控制器参数进行调整,进而补偿执行器故障带来的影响,保证系统在控制输出不足情况下的高精度姿态稳定性;其二针对探测器参量变化、外部环境干扰等不确定情况,设计了基于自适应神经网络的迭代学习控制器,采用径向基函数（RadialBasisFunction,RBF）神经网络对系统非线性部分进行逼近,同时对控制器参数进行自适应迭代学习调整,进而保证系统在不确定情况下的动态性能。数值仿真结果表明该控制器能够有效抑制外部环境干扰和内部参数变化带来的不利影响,在执行器部分失效甚至完全失效故障情况下,仍能保证系统的鲁棒性并实现误差在10^-2数量级内的较高姿态控制精度。     

气液鼓泡床反应器中气泡行为光纤探针测量方法

本文分别采用电导探针和光纤探针测量气液鼓泡床反应器中的气含率、气泡速率和气泡弦长等气泡行为,结果表明光纤探针对气泡具有响应迅速、阶跃显著的特点。将光纤探针信号进行方波化处理,探针在气相中的采样点数与总采样点数之比即为局部气含率,再沿径向积分可得平均气含率,以压差法测得的平均气含率为基准,光纤探针比电导探针准确性更高。将改造后的光纤探针应用于高温、高压、液相为有机体系的气液鼓泡床反应器,测得该反应器的气含率呈中心及边壁低、0.4倍半径处最大的抛物形分布。因此,开发的光纤探针可用于高温、高压、液相有机体系中气泡行为的测量。