卫星双向时间比对的设备时延标定方法

卫星双向时间比对的设备时延包含在伪码测距的测量值之中,精确标定设备时延是提升卫星双向时间比对精度的关键。针对卫星双向时间比对中的设备时延标定问题,提出了一种基于同源零基线测量的设备时延标定方法,将中国科学院国家授时中心的1套3.7m天线地面站和2套5m天线地面站并址安装,3套地面站同时进行卫星双向时间比对模式的观测,以此来标定3套地面站之间的设备时延相对值。试验结果表明,该方法可使设备时延标定的精度达到亚ns量级,能有效减小设备时延对卫星双向时间比对精度的影响,对于多个地面站站间时间比对具有一定的实际意义。     

车载两轴式岸防导弹发射平台总体指向精度分析

文章以车载两轴式岸防导弹发射平台为研究对象,确定了发射平台的总体精度架构,针对发射装置随动系统、机械传动系统、发射装置结构和载车平台等精度支路,对总体指向精度的影响进行深度剖析,提出了“同类方差+异类求和”的误差分类方法和统计运算原则,运用 ADAMS和 ANSYS仿真软件,对发射平台的总体指向精度预估方法开展了系统的研究,较客观地反映了发射平台总体指向精度的真实情况,对相关研究具有一定的借鉴意义。     

Design and optimization of stable initial heliocentric formation on the example of LISA

Space-based gravitational wave (GW) detector such as the LISA (Laser Interferometer Space Antenna) mission requires high-precision and stability of the triangular formation. The dynamic environment of the detectors is complex, the science requirements for the formation are tight, and consequently, design and optimization of this high-standard formation with essentially many decision variables are very challenging. This paper studies the design and optimization of the stable initial formation of the heliocentric GW detector by taking the LISA as an example. The linearization method based on relative orbital elements is used for formation design in the two-body system. Three constraints are presented to reduce the number of decision variables to fourteen. The geometric features of the arm length and breathing angle of the triangular formation and the relative position of LISA to the Earth are analyzed and numerically verified in a high-fidelity dynamic model, from which the relationships of multiple requirements of LISA are studied, and a single index is summarized to simplify the optimization. Sobol sensitivity analysis is used to quantitatively evaluate the sensitivities of the decision variables to the cost function, with which a self-adaptive adjustment algorithm of the region of the variables is presented to improve the computational efficiency. The availability of the method to quickly and precisely find a stable initial formation in an extensive neighborhood of the nominal formation is verified by numerical simulation, where the best solution decreases about 47.54% of the arm length change from the requirement. This study shows that the initial formation should be deployed appropriately away from the Earth, and the gravitations of Venus and Jupiter should be utilized to maintain the formation stability.     

数控机床校准周期的合理确定

从具体实际出发，充分分析影响机床最终加工精度的诸多因素，应用田口方法科学合理地确定数控机床的最佳校准周期，保障机床加工过程的质量控制。     

TanDEM-X: A radar interferometer with two formation-flying satellites

TanDEM-X (TerraSAR-X add-on for Digital Elevation Measurements) is an innovative formation-flying radar mission that opens a new era in spaceborne radar remote sensing. The primary objective is the acquisition of a global digital elevation model (DEM) with unprecedented accuracy (12 m horizontal resolution and 2 m relative height accuracy). This goal is achieved by extending the TerraSAR-X synthetic aperture radar (SAR) mission by a second, TerraSAR-X like satellite (TDX) flying in close formation with TerraSAR-X (TSX). Both satellites form together a large single-pass SAR interferometer with the opportunity for flexible baseline selection. This enables the acquisition of highly accurate cross-track interferograms without the inherent accuracy limitations imposed by repeat-pass interferometry due to temporal decorrelation and atmospheric disturbances. Besides the primary goal of the mission, several secondary mission objectives based on along-track interferometry as well as new bistatic and multistatic SAR techniques have been defined, representing an important and innovative asset of the TanDEM-X mission. TanDEM-X is implemented in the framework of a public–private partnership between the German Aerospace Center (DLR) and EADS Astrium GmbH. The TanDEM-X satellite was successfully launched in June 2010 and the mission started its operational data acquisition in December 2010. This paper provides an overview of the TanDEM-X mission and summarizes its actual status and performance. Furthermore, results from several scientific radar experiments are presented that show the great potential of future formation-flying interferometric SAR missions to serve novel remote sensing applications.     

采用压电陶瓷传感器提高悬臂式镗杆的加工精度(英文)

由于悬臂式镗杆的刚度较低,镗削加工中容易产生加工误差。本文采用了误差在线检测与实时补偿的方法,以提高悬臂式镗杆的加工精度。通过应变片测试微量镗削加工中镗杆的变形,在线检测加工误差,用压电陶瓷传感器对加工误差进行实时补偿。镗刀和压电陶瓷传感器分别安装在杠杆式结构的微量镗杆的两端,这样镗杆的结构尺寸可以不受压电陶瓷传感器的影响,镗杆的长径比为８。     

一类非线性系统的降维状态观测器设计

研究一类仿射非线性系统的降维状态观测器设计问题,对于一类可以反馈线性化的非线性系统,提出了一种非线性降维状态观测器设计方案,并证明了状态观测的渐的收敛性。     

无电压限幅环节的无传感器永磁同步电机矢量控制技术

在电机高速弱磁或过载要求高的情况下,需要通过脉冲宽度调制(PWM)的过调制运行提高直流母线电压利用率。基于磁链观测的无传感器永磁同步电机矢量控制(磁场导向控制,FOC)技术具有算法简单、易实现等优点,但在过调制的情况下电压限幅环节会引起磁链观测及转子位置角估算误差。为提高PWM过调制情况下系统的控制性能,对传统的FOC控制框图进行了改进,省去了电压限幅环节并利用由占空比计算的实际电压对定子磁链进行估算。MATLAB仿真验证了改进方法的有效性。研究结果表明:该方法充分利用PWM调制自有的限幅特性,既能简化控制算法又能提高磁链观测精度,具有较好的技术经济性能。     

瞬态热应力问题的组合杂交有限元方法

求解瞬态热应力问题的杂交元方法面临Ladyshenskaya-Babuska-Brezzi(LBB)条件的检查,其稳定性难以保证,从而提出瞬态热应力问题的组合杂交有限元方法。建立瞬态热应力问题的基于区域分解的组合杂交变分原理及其有限元离散;通过数值算例验证求解瞬态热应力问题的组合杂交元的数值性能。结果表明:在大宽厚比网格下,八节点六面体组合杂交元(CHH(0-1))可以获得与二十节点六面体元(B20)精度相当的位移计算结果和更好的应力计算结果。     

“嫦娥4号”中继星使命轨道段定轨计算与分析

"嫦娥4号"中继星是"嫦娥4号"探测器实现月球背面着陆与巡视的关键,目前正稳定运行在地-月L2点使命轨道上,该使命轨道为平均周期约14天的南族Halo轨道。因任务的需要,中继星本体系+Z轴需调整指向,处于正对太阳和非正对太阳两种状态。太阳光压在中继星+Z轴对日的情况下会加速卫星的角动量累积,增加卫星卸载喷气频次。基于中继星使命轨道段测控支持条件,采用重叠弧段法对两种状态下的中继星定轨精度进行分析与评估。结果表明,在中继星+Z轴非对日运行状态下,重叠弧段位置误差为1.6 km,速度误差为8 mm/s;在中继星+Z轴对日运行状态下,重叠弧段位置误差为0.6 km,速度误差为3 mm/s,这对中继星的长期运行具有重要参考价值。