旋转弹气动力建模与飞行轨迹仿真

运用一种自回归滑动平均(ARMA)的时域气动力建模方法,以计算流体力学与刚体动力学(CFD/RBD)耦合仿真的输出结果为样本,对旋转弹的非定常气动力进行建模。利用建立的气动力模型与刚体动力学方程求解模块耦合,实现了旋转弹轨迹的快速仿真,并讨论了不同的建模方式对仿真精度的影响。算例结果表明:采用气动力模型与刚体动力学方程耦合仿真技术可以在不同初始发射条件下进行旋转弹飞行姿态与运动轨迹预测,且与CFD/RBD仿真结果吻合较好,证明ARMA气动力建模方法可以在保证旋转弹轨迹预测精度的同时大幅缩短仿真时间,节省计算资源。     

基于MATLAB/Simulink的变频电机系统能耗实用模型

变频电机系统能耗分析需要对系统各环节建立准确的损耗计算模型。针对目前有限元模型建模繁琐、计算量大的现状,在考虑了变频电源谐波对铁耗电阻影响的基础上,建立了计及铁耗等效电阻的异步电机数学模型及PWM变频器主电路损耗模型,提出一种基于MATLAB/Simulink的变频电机系统实用模型,实现了变频电机系统各环节损耗准确分析。通过对不同工况下变频器、电机和系统总效率的仿真分析,揭示了传统忽略变频器能耗的损耗分析方法对系统最佳运行点估算存在一定误差。为了验证模型正确性,对一组5.5 kW变频电机系统进行了试验对比,验证了文中模型能够正确有效地模拟变频电机系统运行。研究成果为进一步研究系统能耗最优控制策略提供了重要理论支撑。     

地面飞行模拟器动力学建模与应用研究

地面飞行模拟器的训练效果主要取决于动力学建模的逼真度和满足正常/特殊情况飞行任务的程度。首先,分析了影响飞机动力学特性和飞行员操作各个因素的相互关系,旨在从任务飞行、故障飞行和特殊环境条件飞行三方面拓展地面飞行模拟器的模拟能力;其次,进行了飞机空中编队、方向舵故障、雨中飞行以及非线性起落架减振支柱的仿真。研究结果表明,拓展地面飞行模拟器的应用范围是实际飞行的需要且技术可行,关注细节的部件建模更是提高地面飞行模拟器逼真度和可信度的关键。     

面向分析的产品建模技术概述

针对当前面向制造的产品模型对产品设计后续数值模拟阶段的适应性不足的问题,为提高产品几何模型与分析模型转换效率,分析了产品模型在数值模拟中的表达形式,总结了面向分析的建模所面临的问题,归纳出面向分析的建模需求,通过改进现有的参数化建模方法,提出了面向分析的产品建模技术及其结构框架,最后以涡轮叶片为例,创建能够适应后续数值模拟的涡轮叶片模型,在一定程度上降低了叶片设计分析一体化的难度,同时对其他高质量数字化模型的创建也有一定的参考价值。     

浮力修正湍流模型在航空发动机火灾模拟中的应用

由于发动机舱的火灾是典型的热驱动的浮力羽流,从探索浮力羽流的模拟方法出发,针对热羽流的基准试验,比较验证了3种基于浮力修正的2个方程湍流模型;利用pre PDF燃烧模型,模拟验证了Purdue甲烷火燃烧试验;以RR公司Trent 800发动机的1/2缩比短舱着火试验器为原型,采用RANS方法对由燃油泄漏引起的油池火进行了模拟计算,重现了短舱火灾的主要物理过程,并与试验测量的速度及温度结果进行了对比,验证了计算方法的准确性,并进一步分析了影响模拟结果的主要原因:湍流模型与燃烧模型能否准确计算近火源区域的火焰锋面状态,直接影响空气卷吸及下游火羽流的温度与速度。应用CFD技术,可以从防火设计的角度优化通风系统及短舱附件的布局。     

航电系统安全性分析工具设计与研究

随着航电系统综合化程度的不断提高,传统的安全性分析方法过于依赖工程经验,难以保证失效模式的完备性。同时在系统迭代设计的过程中,由于系统的复杂性,会导致安全性分析工作量过大,增加了时间及经济成本。针对上述问题,设计了一种自动化安全性分析工具,基于Sys ML描述语言建立安全性数据模型,采用路径追溯的方法完成故障树自动建模,并对生成的故障树进行共模分析和区域安全性分析。以某系统为例的实验结果表明,该工具能够实现故障树自动建模与分析,提高了安全性分析的效率和完备性。     

机翼-机身柔顺对接装配及接触力分析方法

在机翼机身数字化对接装配中,由于制造误差、定位误差等因素,装配件在对接前不可避免地存在一定偏差,对接过程中连接结构可能出现磕碰、磨损和变形等现象。为了避免翼身对接装配中遇到上述情况,本文设计了一种五自由度柔顺对接机构,使部件对接过程中遇到干涉时能够柔性适应,根据目标部件的导向顺利完成装配。在此基础上,本文以叉耳式连接结构为研究对象,通过对翼身柔顺对接过程中连接结构的接触力情况进行分析,建立了翼身柔顺对接过程中叉耳式连接结构的接触力预测模型。     

Quantifying the role of solar radiative forcing over the 20th century

The 20th century temperature anomaly record is reproduced using an energy balance model, with a diffusive deep ocean. The model takes into account all the standard radiative forcings, and in addition the possibility of a non-thermal solar component. The model is parameterized and then optimized to produce the most likely values for the climate parameters and radiative forcings which reproduce the 20th century global warming. We find that the best fit is obtained with a negligible net feedback. We also show that a non-thermal solar component is necessarily present, indicating that the total solar contribution to the 20th century global warming, of ΔT_solar = 0.27 ± 0.07 °C, is much larger than can be expected from variation in the total solar irradiance alone. However, we also find that the largest contribution to the 20th century warming comes from anthropogenic sources, with ΔT_man = 0.42 ± 0.11 °C.     

DORIS processing at the European Space Operations Centre

This paper gives an overview of the DORIS related activities at the Navigation Support Office of the European Space Operations Centre. The DORIS activities were started in 2002 because of the launch of the Envisat satellite where ESOC is responsible for the validation of the Envisat Precise Orbits and a brief overview of the key Envisat activities at ESOC is given. Typical orbit comparison RMS values between the CNES POE (GDR-C) and the ESOC POD solution is 6.5, 18.8 and 23.1 mm in radial-, along- and cross-track direction. In the framework of the generation of the ITRF2008 ESOC participated in the reprocessing of all three space geodetic techniques; DORIS, SLR, and GPS. Here the main results of our DORIS reprocessing, in the framework of the International DORIS Service (IDS), are given. The WRMS of the weekly ESOC solution (esawd03) for the 2004–2009 period compared to the IDS-1 combined solution is of the order of 12 mm. Based on the long time series of homogeneously processed data a closer look is taken at the estimated solar radiation pressure parameters of the different satellites used in this DORIS analysis. The main aim being the stabilization of the Z-component of the geocentre estimates. We conclude that the ESOC participation to the IDS ITRF2008 contribution has been beneficial for both ESOC and the IDS. ESOC has profited significantly from the very open and direct communications and comparisons that took place within the IDS during the reprocessing campaign.     

Comparison of peak characteristics of F2 ionospheric layer over Tehran region at a low solar activity period with IRI-2001 and IRI-2007 models predictions

In the present work values of peak electron density (NmF2) and height of F2 ionospheric layer (hmF2) over Tehran region at a low solar activity period are compared with the predictions of the International Reference Ionosphere models (IRI-2001 and IRI-2007). Data measured by a digital ionosonde at the ionospheric station of the Institute of Geophysics, University of Tehran from July 2006 to June 2007 are used to perform the calculations. Formulations proposed by  and  are utilized to calculate the hmF2. The International Union of Radio Science (URSI) and International Radio Consultative Committee (CCIR) options are employed to run the IRI-2001 and IRI-2007 models. Results show that both IRI-2007 and IRI-2001 can successfully predict the NmF2 and hmF2 over Tehran region. In addition, the study shows that predictions of IRI-2007 model with CCIR coefficient has closer values to the observations. Furthermore, it is found that the monthly average of the percentage deviation between the IRI models predictions and the values of hmF2 and NmF2 parameters are less than 10% and 21%, respectively.