Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

永磁有限转角力矩电机的仿真与实验

随着多电飞机的快速发展及成附件轻小化、高效能的迫切需求,有限转角力矩电机(Limited Angle Torque Motor,LATM)在飞机引气系统中的应用日益迫切。一方面,有限转角力矩电机可以显著简化高温引气控制阀结构、减小体积;另一方面,可以基于系统需求实现引气压力和温度按需调节,减少燃油代偿损失。针对高温有限转角力矩电机工作特性不易预测的难题,建立了其数学模型、仿真模型,并通过实物试验验证了仿真模型的准确性。研究结果为有限转角力矩电机特性研究提供了参考依据。     

考虑测量约束的非合作目标近距离快速导引控制方法

研究了考虑测量约束的非合作目标近距离快速导引控制方法。首先,基于C-W方程建立了解析形式的径切联合近距离快速导引控制模型,并采用微分修正方法将解析结果进行修正;然后推导了任意初始条件下,径切联合控制双脉冲与视场角的解析关系;最后基于相对偏心率矢量建立了径切联合控制的控后效果评估模型。仿真结果表明:提出的控制方法和控后效果评估模型有效。     

基于太阳黑子群数据的多模态太阳耀斑预报模型

当前的太阳耀斑预报模型主要通过统计关系建立,直接将从太阳黑子群磁图中提取的特征参量作为模型输入,系统的自主性低,导致图像数据中包含的与太阳耀斑相关的高阶抽象信息难以被充分利用,进而限制模型预报的精度。为解决当前太阳耀斑预报中数据利用不充分的问题,文章将海量太阳观测数据与先进的人工智能技术结合,综合利用太阳活动区磁场观测图、磁场特征参量和对应的耀斑事件标签,并借助全连接神经网络高精确率以及卷积神经网络高召回率和可有效提取高层语义信息的优点,构建基于深度学习的多模态太阳耀斑预报模型。实验证明该模型的主要评价指标结果比其他模型至少提高7.8%。     

河北省产业集群研究

基于菱形模型来分析河北省目前产业集群的现状和存在的问题,在政府职能定位、创新、特色产业集群等角度试图探求集群升级的策略。     

运载火箭姿控对迭代制导适应性分析的仿真方法研究

首先给出了迭代制导方法,然后建立了姿态动力学全量数学模型,在考虑弹性振动和液体晃动的情况下,进行了制导与姿控系统的六自由度联合仿真.仿真结果表明,在迭代制导实时优化输出程序角的情况下,姿控系统具有良好的跟踪性能;在制导与姿控子系统相互作用的情况下,能够确保制导程序角的收敛和姿态的稳定.     

超临界层流翼型优化设计策略

针对超临界层流翼型设计问题,提出一种两轮优化策略。采用γ-Reθt转捩模型耦合剪切应力输运(SST)模式的湍流模型对翼型边界层转捩进行预测。翼型几何参数化建模采用形状分类函数转换(CST)方法,设计变量为描述翼型几何特征的参数。第1轮优化的目的是尽量提高层流区域的比例,气动分析模型为基于Kriging模型的代理模型,优化算法为遗传算法,通过优化获得满足约束要求的层流翼型。第2轮优化目的是对第1轮优化获得的翼型进行微调,进一步提高翼型的升阻比,气动分析直接采用CFD程序,优化算法采用基于梯度的优化算法。算例表明,应用本文提出的两轮优化策略,可将超临界翼型NASA SC(2)0412优化设计成超临界层流翼型,翼型的上下表面层流区比例分别达到了55.5%和47.0%,升阻比提高了38.1%。     

基于查表的开环MPM预失真器

提出了一种基于查表的开环记忆多项式模型(MPM,Memory Polynomial Model)预失真器.从MPM预失真器系数估计和执行信号预失真处理两方面加以考虑.首先,利用预失真器和高功率放大器(HPA,High Power Amplifier)传输特性的互补性,由采集到的HPA输入、输出基带数据进行单次最小二乘估计得到MPM预失真器的系数,避免了以往递归结构的收敛性和计算量大等问题.然后,利用MPM预失真器的特点,建立了基于输入信号强度索引的一维向量表,通过查表实现MPM预失真器的幂次累加项,极大地减少了实现预失真器所需的计算量及硬件开销.仿真显示,采用提出的预失真器可以有效补偿HPA对信号的记忆非线性失真,有效带宽内获得了近20 dB的功率改善,也显著改善了系统误码性能.     

燃烧过程辐射换热离散坐标模型的应用

对离散坐标(DO)辐射传热模型分别在长方体空间和旋流燃烧室内进行了验证与应用。长方体空间的计算结果表明:DO模型的纯辐射传热预报结果比六热流(SHF)模型准确,与计算精确的区域法的计算结果吻合较好,而SHF模型的预报结果却有较大的误差。对于旋流燃烧室内温度场的模拟预报也表明,DO模型的计算结果和实验值相吻合,明显高于用SHF模型计算所得的温度值。另外,DO模型在计算时间和边界处理等方面比区域法优越;在收敛速度和计算准确度等方面也比工程常用的六通量模型优越。      

Coupled Lagrangian impingement spray model for doublet impinging injectors under liquid rocket engine operating conditions

To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the jet impingement process and the ambient gas field. The new coupled model consists of the plain-orifice sub-model, the jet-jet impingement sub-model and the droplet collision sub-model. The parameters of the child droplet are determined with the jet-jet impingement sub-model using correlations about the liquid jet parameters and the chamber conditions.The overall model is benchmarked under various impingement angles, jet momentum and offcenter ratios. Agreement with the published experimental data validates the ability of the model to predict the key spray characteristics, such as the mass flux and mixture ratio distributions in quiescent air. Besides, impinging sprays under changing ambient pressure and non-uniform gas flow are investigated to explore the effect of liquid rocket engine chamber conditions. First, a transient impingement spray during engine start-up phase is simulated with prescribed pressure profile. The minimum average droplet diameter is achieved when the orifices work in cavitation state, and is about 30% smaller than the steady single phase state. Second, the effect of non-uniform gas flow produces off-center impingement and the rotated spray fan by 38°. The proposed model suggests more reasonable impingement spray characteristics than the uncoupled one and can be used as the first step in the complex simulation of coupling impingement spray and combustion in liquid rocket engines.